# EGRET Overview and Update

#### Robert M. Hirsch

#### 3/31/2021

# Introduction

Evaluating long-term changes in river conditions (water quality and discharge) is an important use of hydrologic data. To carry out such evaluations, the hydrologist needs tools to facilitate several key steps in the process: acquiring the data records from a variety of sources, structuring it in ways that facilitate the analysis, processing the data with routines that extract information about changes that may be happening, and displaying findings with graphical techniques. An R package called EGRET (Exploration and Graphics for RivEr Trends) has been developed for carrying out each of these steps in an integrated manner. The analysis of the water quality data depends on a statistical method called Weighted Regressions on Time, Discharge, and Season (WRTDS). This EGRET Update Overview is intended as a guide for users, pointing to the particular capabilities that they may want to use to meet their data analysis goals. The most detailed description of the EGRET package and WRTDS method are contained in the EGRET User Guide.

However, several major enhancements and extensions of the method have been made since the User Guide was published in 2015. This EGRET Update Overview is designed to help a user decide which of EGRET’s capabilities they want to apply, and then point them to the relevant documents that describe those in detail. These include various journal articles that explain motivations for these enhancements, provide the mathematical formulations for them, and show examples of their application. It also includes references to various supporting vignettes that explain how to apply these enhancements to the EGRET package. There are also several special applications for which R scripts have been written that depend on the EGRET package, this EGRET Overview and Update will describe them and point to those scripts.

## The EGRET home page

There is a home page for EGRET that is frequently updated by the co-developers (Robert Hirsch and Laura DeCicco). There are several sections (tabs) that users might want to turn to.

- Overview and Update which is this document. We would anticipate that this will revised to reflect more updates over time.

- Introduction is primarily a source for workflows for the 2015 version of EGRET, but those workflows are still appropriate for basic applications today.

- Function Help Pages provides access to the Help pages for most functions. These can always be accessed within EGRET using the help function there. One advantage of this list is that the functions are organized into logical groups rather than alphabetically, and this can help the user quickly find the function for their particular need.

- Articles is a menu pointing to major new areas of EGRET functionality as well as scripts that provide add-on features to EGRET. Typically these are scripts with detailed explanations that can be used to process or display EGRET outputs in a different way.

- Biblography is a list of published papers: Those that define the WRTDS method and the motivations for it, those that extend it or evaluate it, and finally those that use it in some type of regional or site specific analysis. At the moment this list is current to about February 2020. It will be updated again in the future.

## EGRETci

There is an additional R package that users of EGRET should be aware of, called EGRETci (which stands for confidence intervals). The EGRETci package is designed to provide a variety of approaches to uncertainty analysis related to the water quality trend results computed in EGRET. EGRETci is tightly linked to EGRET, such that output dataframes or other objects produced by EGRET serve as inputs to functions in EGRETci. Throughout this EGRET Update and Overview we will make mention of the relevant functions of EGRETci. There is a home page for EGRETci.

# General Introduction to the EGRET package

EGRET includes statistics and graphics for streamflow history, water quality trends, and the statistical modeling algorithm Weighted Regressions on Time, Discharge, and Season (WRTDS). It is entirely focused on two data types.

- A record of daily mean discharge at a single streamgage. This record must be a complete record, no missing values are allowed. It also is designed to deal with streams that are perennial, although there is an adjustment that is made for days with zero or negative discharge, but this is only intended to be used in situations where the number of zero or negative discharge is very small (e.g. less than 0.1% of days).

- A record of water quality observations at (or near) the streamgage for which the discharge data are available. These water quality observations are only for a single analyte. There are no requirements of maximum or minimum frequency for these data, nor is there a requirement that the frequency be consistent over time. There can be multiple samples on any given day and there can be many days with no samples. There is no time of day information stored for the sample data. This means that the EGRET software is not appropriate for working with data that are believed to experience substantial diurnal variations, unless the samples are always collected at the same time each day. The data can be censored or uncensored. A censored value is one for which the reported value is either: less than some reporting limit, or greater than some reporting limit.

There are analyses in EGRET that work only with discharge data (we call them Flow History) analyses and others that work with water quality data, but all of the water quality analyses depend on their being discharge data covering the entire time period being analyzed.

# Sources of information about 11 topics

# 1. EGRET overview and data entry

These topics are covered extensively both in the Introduction to the EGRET package and in more detail in the EGRET User Guide.

# 2. Exploration of trends in discharge

EGRET has many tabular and graphical approaches to exploring trends in discharge. These are described in the Flow History component (pages 15 - 28) of the EGRET User Guide(pages 15 – 28) and section 5 of Introduction to the EGRET package.

In addition, a script is available with some new capabilities. It is called Daily Streamflow Trend Analysis. This script includes the graphical technique for exploring trends across the entire frequency distribution: “The Quantile Kendall Plot”. This technique is described in Choquette et al., 2019. One new function, called cumQdate has been added to the EGRET package, it is designed to describe trends in the timing of annual runoff. You can read about it at URL to article here.

# 3. Describing water quality without using the WRTDS model.

In some situations, the analyst may want to simply display a set of water quality data without any use of models or modeling assumptions. This can be a useful addition to showing results derived from the WRTDS statistical model. These are described in section 6 of Introduction to the EGRET package as well as on pages 29 -37 of the EGRET User Guide.

### Improved graphical treatment of censored data.

An enhancement of the EGRET packages provides an additional way to graph the data when there are censored values in the data set (typically values reported as “less than” the laboratory reporting limit). The standard way that EGRET depicts less-than values is by showing a vertical line that extends from the reporting limit value all the way to the bottom of the graph. This is not the most visually effective way of showing the data even though it is a more honest approach than simply representing them by plotting them at their reporting limit. The vertical lines tend to draw a great amount of attention to the less-than values.

The enhancement now in the EGRET package is called Random Residuals. What is done here is to take each censored value in the data set and randomly select a value that lies between the reporting limit and zero and show it on various plots as an open circle (as opposed to actual measured values, which are shown as a closed circle).

The function that accomplishes this is called makeAugmentedSample. These random values are not used in computing any of the WRTDS results (trends, mean concentrations or fluxes) but are only used for graphical representations. They are very valuable for visual presentation but have the drawbacks that: 1) there is no unique “correct” representation of the data. Multiple implementations will result in different random values. 2) the graphs of the data are no longer free from the influence of any statistical model, the computation of these random values depends on an assumption about the distribution of the true value below the reporting limit, and that is based on the assumptions of the fitted WRTDS model.

Having said that, we should recognize that the purpose of many of these graphs of the data is to present a general idea of how the data behave (as a function of time or of discharge) and this approach will provide an appropriate impression of the data. Many of the graphical functions in EGRET have an argument called randomCensored and it should be set to TRUE for this feature to be implemented.

# 4. Making the best possible estimates of concentration or flux for some specific day, month, or year.

Although the primary purpose for the development of the WRTDS method and EGRET software was to evaluate long term trends, they can also be used for this different purpose: creating the best possible estimate of conditions for any specific day, month, or year. For trend analysis (which is discussed in item 5 below) our objective is to remove the confounding influence of the year-to-year variations in discharge in order to see more clearly the underlying trend in water quality. The results from the WRTDS method that are used for the trend analysis purpose are the “Flow-Normalized” values. But here we are considering a different kind of purpose. Here, the question we are focused on is something like: “What’s our best estimate of the flux of total phosphorus into the lake during the month of May 2020?” or “What’s our best estimate of the chloride concentration on February 2, 2019?” For these kinds of estimates we can use a new method called “WRTDS Kalman” or WRTDS_K. In addition there are two publications that describe the concept and the mathematics. Lee, Hirsch and Crawford, 2019 and Zhang and Hirsch, 2019.

WRTDS_K is based on this simple idea. On any given sampled day, the measured concentration will almost certainly differ from the value that WRTDS would predict. The measured value is always a better value to use for that day than is the WRTDS estimate for that day. Furthermore, days surrounding the day of measurement are likely to have values not too different from the sampled day. For any given day, the method uses a mixture of the WRTDS model’s estimated value and the measured value on the nearest sampled day prior and nearest sampled day after the given day to create an optimal estimate for that day. The mathematics of the method uses an auto-regressive, lag-one day, stochastic model to make these estimates of concentration (and hence flux) for each day in the record.

The new functions in EGRET that are used in this process are WRTDSKalman, plotWRTDSKalman, and plotTimeSlice. The EGRETci package also has new capabilities to estimate the uncertainty of these WRTDS_K estimates. This is described in this one still needs to be written.

# 5. Analysis of water quality trends using WRTDS.

This topic is discussed extensively in the EGRET User Guide (pages 38-78) and in the “WRTDS results” section of Introduction to the EGRET package. All of these descriptions of the WRTDS flow normalization method are built on the assumption that for any given day of the year, the probability distribution of discharge is stationary over all the years being considered.
What that means is that we assume that the probability distribution of discharge on, for example, March 5, 1985 was the same as the probability distribution on, for example, March 5, 2021. It doesn’t mean that we actually know that distribution exactly for those dates, but rather it means that we assume it to be unchanged from one year to another year. In other words, we are willing to assume that discharge is free of any long-term trend.

We all recognize that in the real world this assumption is never perfectly correct. We know that many factors may be influencing the probability distribution of discharge. These include for example: land-use change (such as urban development or land drainage), groundwater depletion (influencing base flow to the stream), climate change (influencing precipitation amount and type as well as temperature), or changes in storage or diversion of water upstream. The probability distribution of discharge can also respond to quasi-periodic oscillations of the regional climate causing a region to experience decadal or longer periods of persistently dry or persistently wet conditions. These oscillations can be very difficult to distinguish from long-term trends. All of the applications of WRTDS up to 2019 were built on this assumption of discharge stationarity. Starting in 2019, with the publication of Choquette et al., 2019, a different approach was considered for flow normalization. This is known as Generalized Flow Normalization (GFN) in contrast with Stationary Flow Normalization (SFN) which was the original assumption.

### 5a. Trends based on Stationary Flow Normalization (SFN).

The concepts and functions from earlier versions of the EGRET software remain in the new version as they were. The primary function for doing these analyses continues to be modelEstimation and the functions for viewing trend results continue to be plotConcHist, plotFluxHist, tableChange, tableChangeSingle, tableResulsts, plotContours, and plotDiffContours. When the water quality data set is shorter than about 20 years the SFN approach is really the only viable approach. A time period this short is just simply not amenable to characterizing the magnitude and nature of the discharge trend. Also, when the data sets are longer than 20 years and evaluation of the discharge record does not reveal any substantial monotonic trend over the record, the Stationary Flow Normalization approach should be the preferred approach. Trends in discharge that are in the range of 10% change over the period of the water quality record should use SFN. EGRET contains tools that can quantify streamflow trends.

There has been some new functionality added for trend analysis added to EGRET that can provide flexibility to undertake Generalized Flow Normalization (addressed in section b. below) but can also enable the analyst to ask some more specific questions about the trend. These three new functions are the following:

#### 5ai. runPairs( )

runPairs is designed to address the specific question of how much has the flow-normalized concentration or flow-normalized flux changed from some selected starting year to some selected ending year. The exact same information can be gleaned from modelEstimation and then tableChange. The advantage of `runPairs` is that the analysis can take significantly less computer time, because it is not attempting to statistically model all the years between the starting and ending year. The output of `runPairs` can then be used as input to runPairsBoot in the EGRETci package to evaluate the uncertainty of the trend.

#### 5aii. runGroups( )

The concept in group analysis is that we wish to compare not just two different years as we did in `runPairs` but rather, to compare one group of years to another group of years. For example, there may be a strategy for nutrient reduction that calls for decreases in average concentrations, or average fluxes, for some period after the strategy went into effect compared to the time before it went into effect. Or perhaps we want to evaluate the consequences of a large investment in pollution control that went into effect fairly abruptly at some point in time and we want to do a “before and after” analysis. The evaluations of trends for these kinds of analyses can’t be gleaned from `modelEstimation` or `runPairs`. See runGroups for details about the function. Also, the outputs of `runGroups` can be used as input to runGroupsBoot in the EGRETci package to evaluate the uncertainty of the trend.

#### 5aiii. runSeries( )

This function produces annual flow-normalized concentrations and fluxes for the entire period being analyzed. This function produces the same type of output as `modelEstimation`. It simply has more options available to it than `modelEstimation`. See runSeries for details about the function. The outputs of runSeries can be used in conjunction with ciCalculations and plotConcHistBoot, and plotFluxHistBoot in the EGRETci package to show confidence intervals on the annual flow-normalized values.

### 5b. Trends based on Generalized Flow Normalization (GFN)

As discussed above, GFN is designed to account for the role of trends in discharge in the analysis of trends in concentration or flux. See GFN approach for details about how it is implemented. The discussion of the motivations and the mathematics of it are in Choquette, et al. (2019). When GFN is used, any trends that are reported are partitioned into two components. One is the concentration versus discharge trend component (CQTC). The other is the discharge trend component (QTC). The two components are additive, and sum to the total trend. In the case of SFN the QTC is defined as equal to zero and thus the entire trend can be considered the QCTC.

One particular thing to note about implementing GFN is that in preparing the data for use in the analysis it is valuable to make use of the daily discharge for many years both before and after the period of water quality data, to the extent possible. This is different from how the data should be prepared for SFN, where it is suggested that the daily discharge record extend no more than a year before the first water quality sample and no more than a year after the last water quality sample. The functions used for GFN are the same three functions mentioned above: runPairs, runGroups, and runSeries. Each of these functions contains arguments that are used to implement GFN. Uncertainty analysis for these functions can be found in EGRETci in the functions runPairsBoot, runGroupsBoot, and ciCalculations.

### 5c. Generalized flow normalization with a flow break.

This is used for the situation where there is some singular engineered action that results in a change in the probability distribution of streamflow at some particular time. The new EGRET code allows us to treat discharge as stationary within each of two periods in the record but allows the distribution for the first period to be different from the second period. We call this a flow break. The most obvious examples would be the completion of a dam upstream of the monitoring site. This needs to be a dam that has a clear impact on discharges at the monitoring site (e.g. decreasing the peak discharges of high flow and/or increasing the low flows). Other changes could include: the removal of a dam, the institution of a new operating policy for the dam (e.g. increasing the size of minimum flows to support habitat), or major new diversions of water into or out of the watershed. There are no well-defined criteria for the magnitude of the change that should trigger the use of GFN except to say that it should be big enough that comparisons of flow duration curves before and after it show an easily discernible difference. Only use this technique when the change can be clearly seen in the data and is based on some known human action. Even a large dam or diversion, if it only affects the flows from less than half of the watershed area, is probably not a good reason to use this feature. An abrupt change in streamflow conditions that has no clear human driver should not be the basis for using this approach. Again the same three trend functions mentioned above (`runPairs`, `runGroups`, and `runSeries`) all have arguments that make it possible to include a flow break in the analysis.

# 6. Abrupt change in water quality.

We refer to this as the wall. The idea of the wall is to appropriately handle events that you believe would result in a sharp discontinuity in the way that concentrations behave as a function of discharge, year, and season. WRTDS was designed with a working assumption that changes in the concentration-discharge relationship are gradual, responding to changes in behavior of many actors in the watershed. The use of statistical smoothing in time, which is central to WRTDS, is predicated on the idea that the changes in the system are gradual. The gradual changes could be driven by changes in population (and hence wasteloads), changes in land use or land use practices by many landowners, or many changes in point source controls implemented by many dischargers. But we know that there can be situations that depart from that assumption of gradual change. Some obvious ones are: upgrades to a single dominant point source discharge, large infrastructure changes in storm-water management (e.g. tunnel projects in big cities that significantly curtail combined sewer overflows), construction or removal of a major dam (causing the pollutant of interest to mix with a large volume of water in the reservoir significantly changing the concentration-discharge relationship and in the most extreme cases virtually eliminating any relationship between concentration and discharge). There is another category of abrupt change that could also be considered, and that is a “reset” of river conditions that may be the result of an extreme flood or extreme drought. The hypothesis is that the behavior of water quality has changed as a result of this extreme event and that this change is not a short-term thing (i.e. the duration of the event) but rather is something that persists for a number of years. The new “wall” concept can provide an effective way to perform a hypothesis test that the event in question brought about a lasting change, and the approach allows us to describe the nature of the change that took place.

Conceptually the approach is simple, the analyst specifies the date on which this change takes place, and then the smoothing process involved in estimating the WRTDS model places a “wall” at that specific time. What this means is that estimates of the concentration for any time, discharge and season, that lies prior to the time of the wall, is estimated only from data collected before the wall. Conversely the estimates after the wall are only based on data collected after the wall. The result of this process is that the contour surface seen in plotContours can have a sharp break at a vertical line where the wall is located.

The idea of using this as a way of testing if some specific action brought about a statistically significant change in water quality can be accomplished by using the runGroups function and letting the two groups be distinguished by being either before or after the wall. The confidence level or uncertainty of this before and after difference can then be determined in using runGroupsBoot in the EGRETci package. The wall can also be implemented in the runPairs and runSeries functions as well.

# 7. Seasonal analysis of trends

Sometimes it is of interest to understand if there may be trends in water quality is some seasons and not in other seasons, or even trends in opposite directions for different seasons. There are scripts that can be used to evaluate the water quality trends in different seasons or to show a graph of the months displaying the seasonal pattern of fluxes by month and the change over several years of these monthly fluxes.

# 8. Parallel computing

Because EGRET can be computationally intensive, and EGRETci even more intensive, there are a set of techniques provided to run EGRET processes in parallel and thus greatly compress the amount of time required to complete a large analysis that covers many sites and many analytes. EGRET and EGRETci allow for parallel computing. These techniques can be executed on a single computer with several cores, or they can be executed across a large array of connected computers.

# 9. errorStats( ) to describe the overall accuracy of a WRTDS model

Sometimes it is useful to have statistics that describe the magnitude of the errors in a WRTDS model, the way we would for a multiple linear regression. A function called errorStats has been included in the EGRET package that computes the equivalent of an R-squared value (like in multiple regression). The R-squared is computed on the log of the concentration as well as on the log of the flux. It also provides a root mean squared error and a standard error of prediction in percent. It can provide a useful tool for comparison to similar water quality statistical models, or for comparing different settings for the three window parameters of the WRTDS model (windowY, windowS, and windowQ).

# 10. Dealing with problems of model convergence

On rare occasions the WRTDS estimation process fails to converge numerically, or results in highly unreasonable results (e.g. estimated concentrations that are far beyond the limits of those observed in the record). These problems are very rare in EGRET, but they can be a little more common in EGRETci, because of the odd properties that the bootstrap samples can have. A fix for these rare cases has been developed for the EGRET package, and it is also used in the EGRETci package. Because these problems are sometimes related to multicollinearity in the Sample data, the idea is to add some “jitter” (small amounts of random noise) to the time and discharge data. This often solves the numerical problems. It should only be used if there is a clear problem with the results. The function used is called jitterSam. Its use is primarily in functions in the EGRETci package.

# 11. Alternative discharge variables in the WRTDS model

Sometimes the usual formulation of WRTDS is not ideal because we believe that the daily discharge on the sampling day is not a very good explanatory variable and we have an idea of a better variable we might use. Dams and reservoirs create situations where this may be an issue. It may turn out that a better explanatory variable model for the WRTDS model might be a rolling-mean of discharges over some period of many days up to (and including) the sampled day instead of the daily discharge on the sampling day. There is an article describing this concept and a script for making such an analysis using an alternative Q variable.