# changelog

author: Ana Cabral <acabral@redhat.com> - 1:1.39.5-1
changelog:
  - Update to 1.39.5 release (development)
  - device: commit l3cfg on link change only when the device is activating (rh #2079054)
  - l3cfg: during reapply, also clear IPv6 temporary addresses (rh #2082230)
  - dhcp: support overlong DHCP host names (rh #2033643)
  - cloud-setup: reorder addresses to honor "primary_ip_address" (rh #2082000)


author: Beniamino Galvani <bgalvani@redhat.com> - 1:1.39.6-1
changelog:
  - Update to 1.39.6 release (development)
  - Implement ACD (address conflict detection) for DHCPv4 (rh #1713380)


author: Lubomir Rintel <lkundrak@v3.sk> - 1:1.39.7-1
changelog:
  - Update to 1.39.7 release (development)
  - core: cancel the IP check on deactivation (rh #2080928)
  - core: ensure DHCP is restarted every time the link goes up (rh #2079406)
  - core: fix a leak of L3 configuration memory (rh #2083453)
  - ppp: fix a race with pppd when removing addresses (rh #2085382)
  - wifi: fix a crash when checking WEP supplicant capability (rh #2092782)


author: Lubomir Rintel <lkundrak@v3.sk> - 1:1.39.8-1
changelog:
  - Update to 1.39.8 release (development)
  - core: make ipv6.addr-gen-mode default configurable (rh #1743161) (rh #2082682)
  - dhcpv6: finish DAD before considering a lease to be good (rh #2096386)
  - core: add connection.wait-activation-delay property (rh #2008337)


author: Vojtech Bubela <vbubela@redhat.com> - 1:1.39.10-1
changelog:
  - Update to 1.39.10 release (development)
  - initrd: set a default carrier timeout of 10 seconds in initrd (rh #2079277)
  - dhcp: wait DAD completion for DHCPv6 addresses (rh #2096386)
  - libnm: support wait-activation-delay property (rh #2008337)
  - veth: fix veth activation on booting (rh #2105956)
  - support a ipv6.addr-gen-mode knob in the global config (rh #208268)


author: Beniamino Galvani <bgalvani@redhat.com> - 1:1.39.11-1
changelog:
  - Update to 1.39.11 release (development)
  - dhcp: fix EXTENDED DHCP event to accept lease for dhclient plugin (rh #2109285)
  - ovs: honor unmanaged setting also for interfaces that fail (rh #2077950)


author: Ana Cabral <acabral@redhat.com> - 1:1.39.90-1
changelog:
  - Update to 1.39.90 release (release candidate)
  - bridge: fix reapply of non-bridge properties (rh #2092762)
  - bridge: fix wired.mtu reapply (rh #2076131)


author: Radek Vykydal <rvykydal@redhat.com> - 33.16.7.5-1
changelog:
  - Report registration errors from kickstart (mkolman)
    Resolves: rhbz#2000650
  - GUI: Show the dialog for a missing passphrase in an enlight box (vponcova)
    Related: rhbz#2029101
  - GUI: Ask for a missing passphrase during automated installations (vponcova)
    Resolves: rhbz#2029101
  - Create functions for a missing passphrase in pyanaconda.ui.lib (vponcova)
    Related: rhbz#2029101
  - Add missing period when concatenating password error strings (jkonecny)
    Resolves: rhbz#2075419


author: Radek Vykydal <rvykydal@redhat.com> - 33.16.7.6-1
changelog:
  - dnf: apply the /etc/dnf/dnf.conf configuration file in the installer
    (rvykydal)
    Resolves: rhbz#1899494


author: Radek Vykydal <rvykydal@redhat.com> - 33.16.7.7-1
changelog:
  - bootloader: do not consider non-ibft iscsi disk as usable for bootloader
    (rvykydal)
    Resolves: rhbz#2002629


author: Martin Kolman <mkolman@redhat.com> - 33.16.7.8-1
changelog:
  - Allow to omit WWPN and LUN for NPIV-enabled zFCP devices (jstodola)
    Resolves: rhbz#1497086
  - Reduce the width of the zFCP dialog (jstodola)
    Related: rhbz#1497086


author: Jiri Konecny <jkonecny@redhat.com> - 33.16.7.9-1
changelog:
  - Add tooltip to the Insights checkbox (jkonecny)
    Resolves: rhbz#2069178
  - Increase the minimal suggested size for /boot (vslavik)
    Resolves: rhbz#1844423


author: Vladimir Slavik <vslavik@redhat.com> - 33.16.7.10-1
changelog:
  - Disable the Unregister button during unregistration (mkolman)
    Resolves: rhbz#2068195
  - Install rdma-core if infiniband network device is found (rvykydal)
    Resolves: rhbz#2050356


author: Nick Clifton <nickc@redhat.com> - 10.23-1
changelog:
  - Annocheck: Add a test for unicode characters in identifiers.  (#2017363)
  - gcc-plugin: Default to link-order grouping for PPC64LE.  (#2016458)


author: Nick Clifton <nickc@redhat.com> - 10.27-1
changelog:
  - Annocheck: Skip missing fortify/warning notes for ARM32.
  - gcc-plugin: Try another fix for ppc64le section grouping.  (#2023437)
  - gcc-plugin: Revert 10.22 change.  (#2023437)
  - Annocheck: Add exception for /usr/sbin/ldconfig.  (#2022973)


author: Nick Clifton <nickc@redhat.com> - 10.28-1
changelog:
  - gcc-plugin: Fix bug creating empty attachments.  (#2026944)
  - Annocheck: Change MAYB result to SKIP for DT_RPATH.  (#2026300)


author: Nick Clifton <nickc@redhat.com> - 10.58-1
changelog:
  - Rebase to 10.58.  (#2067148)
  - gcc-plugin: Do not issue warning messages for autoconf generated source files.  (#2009958)
  - Annocheck: Update documentation and fix typo in annocheck.  (#2061291)
  - Annocheck: Add option to enable/disable following symbolic links.
  - Annocheck: Always identify Rust binaries, even if built on a host that does not know about Rust.  (#2057737)
  - Spec File: Use a different method to disable the annobin plugin  (#2054571)
  - Annocheck: Accept static GO binaries.  (#2053606)
  - gcc-plugin: Fix libtool so that extraneous runpaths are not added to the plugin.  (#2047356)
  - gcc-plugin: Use canonical_option field of save_decoded_options array. (#2047148)
  - Annocheck: Add an option to disable the use of debuginfod (if available).
  - Annocheck: Add more glibc special file names.
  - Annocheck: Skip some tests for BPF binaries.  (#2044897)
  - Annocheck: Skip property note test for GO binaries.  (#204300)
  - Annocheck: Add another glibc static library symbol.  (#2043047)
  - Spec File: Use gcc --print-file-name=rpmver for the gcc version info.
  - GCC Plugin: Do not fail if a section cannot be attached to a group.
  - Annocheck: Improve detection of kernel modules.
  - GCC Plugin: Only default to link-once when using gcc-12 or later.  (#2039297)
  - Annocheck: Add option to disable instrumentation test.
  - GCC Plugin: Fix building with gcc-12.
  - Spec file: Add requirement on cpio for annocheck.  (#2039747)
  - Annocheck: Add even more glibc function names. (#2037333)
  - Annocheck: ARM: Do not fail tests that rely upon annobin notes.
  - Annocheck: Extend list of known glibc functions.  (#2037333)
  - Annocheck: Ignore gaps that contain the _start symbol (for AArch64).  (#1995224)
  - Annocheck: Ignore more glibc special binaries.  (#2037220)
  - Annocheck: Do not complaining about missing stack clash notes if the compilation used LTO.  (#2034946)
  - Annocheck: Add /usr/lib/ld-linux-aarch64.so.1 to the list of known glibc binaries.  (#2033255)
  - Docs: Note that ENDBR is only needed as the landing pad for indirect branches/calls.  (#28705)
  - Spec File: Store full	gcc version release string in plugin info file.  (#2030671)
  - Annocheck: Add special case for x86_64 RHEL-7 gaps.  (#2031133)
  - Annocheck: Do not complaining about missing -mstackrealign notes in LTO mode.  (#2030298)
  - GCC Plugin: Do not record missing -mstackrealign in LTO mode.
  - Tests: Fix gaps and stat tests to use newly built annobin plugin.  (#2028063)
  - Annocheck: Ignore gaps in binaries at least partial built by golang.  (#2028583)
  - Annocheck: Allow spaces in gloang symbols.  (#2028583)
  - Annocheck: Initial deployment of libannocheck.  (#2028063)
  - gcc-plugin: Fix bug creating empty attachments.
  - Annocheck: Change MAYB result to SKIP for DT_RPATH.  (#2026300)
  - Annocheck: Skip missing fortify/warning notes for ARM32.


author: Nick Clifton <nickc@redhat.com> - 10.64-1
changelog:
  - Annocheck: Add more special cases for AArch64 glibc on RHEL-8.  (#2072082)
  - llvm-plugin: Fix a thinko in the sources.
  - gcc-plugin: Add remap of OPT_Wall.
  - configure: Fix typo in top level configure.ac.
  - Add support for building using meson+ninja.
  - Annocheck: Fix test for AArch64 property notes.  (#2068657)
  - gcc-plugin: Do not issue warning messages for autoconf generated source files.  (#2009958)


author: Nick Clifton <nickc@redhat.com> - 10.67-1
changelog:
  - Rebuild against LLVM 14.  (#2064521)
  - Annocheck: Do not complain about missing -mbranch-protection option in AArch64 binaries if compiled by golang.
  - Annocheck: Do not complain about missing -mbranch-protection option in AArch64 binaries if compiled in LTO mode.
  - gcc-plugin: Add support for CLVC_INTEGER options.


author: Tomáš Mráz <tmraz@redhat.com> - 3.1.20-7
changelog:
  - the ownership of the spool directory should be root as at is configured
    with daemon username root
  - document the -n option


author: Steve Grubb <sgrubb@redhat.com> 3.0-0.15.20191104git1c2f876
changelog:
  resolves: rhbz#1757986 - Rebase audit package on 8.2 for updates
  resolves: rhbz#1767054 - move audit rules to shared data directory
  resolves: rhbz#1746018 - Breakup 30-ospp-v42.rules into more granular files
  resolves: rhbz#1740798 - auditctl(8) needs clarification for backlog_limit
  resolves: rhbz#1497279 - Add option to interpret fields in audit syslog plugin


author: Sergio Correia <scorreia@redhat.com> - 3.0.5-1
changelog:
  - Rebase audit package on 8.6
    Resolves: rhbz#1939406
    Resolves: rhbz#1906065
    Resolves: rhbz#1921447
    Resolves: rhbz#1927884
    Resolves: rhbz#1921658


author: Sergio Correia <scorreia@redhat.com> - 3.0.7-2
changelog:
  - Adjust sample-rules dir permissions
    Resolves: rhbz#2054727 - /usr/share/audit/sample-rules is no longer readable by non-root users


author: Sergio Correia <scorreia@redhat.com> - 3.0.7-3
changelog:
  - Fix path normalization in auparse
    Resolves: rhbz#2062612 - auparse missing information when used with --format-text


author: Sergio Correia <scorreia@redhat.com> - 3.0.7-4
changelog:
  - Drop ProtectHome from auditd.service as it interferes with rules
    Resolves: rhbz#2071727 - Default systemd service config blocks audit watch rules in some directories


author: Pavel Březina <pbrezina@redhat.com> - 1.0-12
changelog:
  - make authselect work with selinux disabled (RHBZ #1668025)
  - require smartcard authentication only for specific services (RHBZ #1665058)
  - update translations (RHBZ #1608286)


author: Jakub Hrozek <jhrozek@redhat.com> - 1.0-13
changelog:
  - Revert pam_systemd.so to be optional
  - Resolves: #rhbz1643928 - pam_systemd shouldn't be optional in system-auth


author: Pavel Březina <pbrezina@redhat.com> - 1.1-1
changelog:
  - Rebase to authselect-1.1 (RHBZ #1685516)
  - Notify that oddjob-mkhomedir needs to be enabled manually (RHBZ #1694103)
  - Ask for smartcard insertion when smartcard authentication is required (RHBZ #1674397)
  - Update translations (RHBZ #1689973)


author: Pavel Březina <pbrezina@redhat.com> - 1.2.1-1
changelog:
  - Rebase to authselect-1.2.1 (RHBZ #1810471)
  - CLI commands are now correctly translated (RHBZ #1816009)
  - Remove unsupported features from sssd profile description (RHBZ #1830251)
  - add `with-files-access-provider` to sssd profile (RHBZ #1734094)
  - switch to pam_usertype module (RHBZ #1773567)
  - fix typo in sssd profile description (RHBZ #1787638)
  - add minimal profile (RHBZ #1654018)


author: Pavel Březina <pbrezina@redhat.com> - 1.2.2-2
changelog:
  - try_first_pass option no longer works on some PAM modules in RHEL8 (RHBZ #1949070)
  - Need to localize the description of --debug option in authselect show (RHBZ #1970408)


author: Pavel Březina <pbrezina@redhat.com> - 1.2.5-1
changelog:
  - Rebase to 1.2.5 (RHBZ #2080238)
  - sssd profile with-smartcard no longer prevents local users from accessing cron (RHBZ #2070325)
  - backup-restore now works correctly (RHBZ #2066535)
  - add with-subid to sssd profile (RHBZ #2063750)


author: Ian Kent <ikent@redhat.com> - 5.1.4-71
changelog:
  - bz1969210 - autofs: already mounted as other than autofs or failed to unlink
    entry in tree
    - fix empty mounts list return from unlink_mount_tree().
  - Resolves: rhbz#1969210


author: Ian Kent <ikent@redhat.com> - 5.1.4-72
changelog:
  - bz1973025 - /net mount being not cleanly mounted and unmounted
    - fix nonstrict offset mount fail handling.
  - Resolves: rhbz#1973025


author: Ian Kent <ikent@redhat.com> - 5.1.4-73
changelog:
  - bz1973025 - /net mount being not cleanly mounted and unmounted
    - correct patch, fix nonstrict offset mount fail handling.
  - Related: rhbz#1973025


author: Ian Kent <ikent@redhat.com> - 5.1.4-74
changelog:
  - bz1974309 - Removal of default intr mount option while using -hosts
    and host.net
    - remove intr hosts map mount option.
    - fix previous changelog entry revision.
  - Resolves: rhbz#1974309


author: Ian Kent <ikent@redhat.com> - 5.1.4-75
changelog:
  - bz2023740 - autofs: send FAIL cmd/ioctl mess when encountering problems
    with mount trigger
    - fix kernel mount status notification.
  - Resolves: rhbz#2023740


author: Ian Kent <ikent@redhat.com> - 5.1.4-76
changelog:
  - bz2025963 - autofs service has not proper limits set to be able to handle many mounts
    - fix set open file limit.
    - improve descriptor open error reporting.
  - Resolves: rhbz#2025963


author: Ian Kent <ikent@redhat.com> - 5.1.4-77
changelog:
  - bz2025509 - Autofs auto.smb awk script fails on shares with dollar signs
    - fix double quoting in auto.smb.
    - fix double quoting of ampersand in auto.smb as well.
  - Resolves: rhbz#2025509


author: Ian Kent <ikent@redhat.com> - 5.1.4-81
changelog:
  - bz2033552 - Using -hosts option does not work after upgrading from 8.4 to 8.5
    - fix root offset error handling.
    - fix nonstrict fail handling of last offset mount.
    - dont fail on duplicate offset entry tree add.
    - fix loop under run in cache_get_offset_parent().
    - simplify cache_add() a little.
    - fix use after free in tree_mapent_delete_offset_tree().
    - fix memory leak in xdr_exports().
    - avoid calling pthread_getspecific() with NULL key_thread_attempt_id.
    - fix sysconf(3) return handling.
  - Resolves: rhbz#2033552


author: Ian Kent <ikent@redhat.com> - 5.1.4-82
changelog:
  - bz2052122 - autofs attempts unmount on directory in use
    - make umount_ent() recognise forced umount.
    - remove nonstrict parameter from tree_mapent_umount_offsets().
    - fix handling of incorrect return from umount_ent().
  - Resolves: rhbz#2052122


author: Ian Kent <ikent@redhat.com> - 5.1.4-83
changelog:
  - bz2069097 - libnss_sss: threads stuck at sss_nss_lock from initgroups
    - dont use initgroups() at spawn.
  - Resolves: rhbz#2069097


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.36-4
changelog:
  - Tighten cache protection against record from forwarders (CVE-2021-25220)
  - Include test of forwarders


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.36-5
changelog:
  - Fix memory leak in ECDSA verify processing (CVE-2022-38177)
  - Fix memory leak in EdDSA verify processing (CVE-2022-38178)


author: Gopal Tiwari <gtiwari@redhat.com> - 5.56-1
changelog:
  + bluez-5.56-1
  - Fixing (#1965057)
  - Removing bccmd, enabling hid2hci as upstream removed the support in bluez-5.56


author: Jan Pokorný <jpokorny+rpm-booth@redhat.com> - 1.0-3.f2d38ce.git
changelog:
  - update for another, current snapshot beyond booth-1.0
    (commit f2d38ce), including:
    . support for solely manually managed tickets (9a365f9)
    . use asciidoctor instead of asciidoc for generating man pages (65e6a6b)
  - switch to using Python 3 for the tests instead of Python 2
    (behind unversioned "python" references; rhbz#1590856)


author: Jan Pokorný <jpokorny+rpm-booth@redhat.com> - 1.0-4.f2d38ce.git
changelog:
  - revert back to using asciidoc instead of asciidoctor for generating man pages
    (rhbz#1603119)
  - fix some issues in the shell scripts (rhbz#1602455)


author: Jan Friesse <jfriesse@redhat.com> - 1.0-6.ac1d34c.git.1
changelog:
  - Resolves: rhbz#1602455
  - Resolves: rhbz#1682122
  - Resolves: rhbz#1768369
  - Resolves: rhbz#1835831

  - Update to current snapshot (commit ac1d34c) to fix test suite,
    build warnings and build with gcc10
  - Fix hardcoded-library-path
  - Package /var/lib/booth where booth can chroot
  - Add '?dist' macro to release field
  - Pass full path of Python3 to configure
  - Add CI tests
  - Enable gating


author: Jan Friesse <jfriesse@redhat.com> - 1.0-6.ac1d34c.git.2
changelog:
  - Related: rhbz#1835831

  - Do not link with the pcmk libraries
  - Generate runtests.py and boothtestenv.py with -Es as make check does


author: Jan Friesse <jfriesse@redhat.com> - 1.0-199.1.ac1d34c.git
changelog:
  - Resolves: rhbz#1873948
  - Resolves: rhbz#1768172

  - Fix versioning scheme to handle updates better
  - Handle updated exit code of crm_ticket


author: Jan Friesse <jfriesse@redhat.com> - 1.0-199.2.ac1d34c.git
changelog:
  - Resolves: rhbz#2111668

  - Fix authfile directive handling in booth config file
    (fixes CVE-2022-2553)
  - Add enable-authfile option


author: Pavel Raiskup <praiskup@redhat.com> - 3.3.2-4
changelog:
  - fix out-of-bounds read within lha_read_data_none() (CVE-2017-14503)
  - fix crash on crafted 7zip archives (CVE-2019-1000019)
  - fix infinite loop in ISO9660 (CVE-2019-1000020)


author: Ondrej Dubaj <odubaj@redhat.com> - 3.3.2-7
changelog:
  - fix use-after-free in delayed newc link processing (#1602575)
  - fix a few obvious resource leaks and strcpy() misuses (#1602575)


author: Jiri Kucera <jkucera@redhat.com> - 1.13.0-1
changelog:
  - Backport patch to fix CompressedRowSparseMatrixTest.AppendRows test failure
    (see https://github.com/ceres-solver/ceres-solver/issues/383)
    Resolves: #1609969


author: Miroslav Lichvar <mlichvar@redhat.com> 3.3-2
changelog:
  - move pidfile to /var/run/chrony to allow chronyd to remove it on exit
    (#1584585)
  - avoid blocking in getrandom system call (#1592425)


author: Miroslav Lichvar <mlichvar@redhat.com> 3.3-3
changelog:
  - fix PIDFile in local chronyd.service on upgrades from chrony < 3.3-2
    (#1614800)
  - add workaround for late reload of unit file (#1614751)


author: Miroslav Lichvar <mlichvar@redhat.com> 3.5-1
changelog:
  - update to 3.5 (#1685469 #1677218)
  - fix shellcheck warnings in helper scripts (#1711948)
  - update ntp2chrony script


author: Miroslav Lichvar <mlichvar@redhat.com> 4.1-1
changelog:
  - update to 4.1 (#1895003 #1847853 #1929157)
  - add NetworkManager dispatcher script to add servers from DHCP even without
    dhclient (#1933139)
  - restrict permissions of /var/lib/chrony and /var/log/chrony (#1939295)
  - reset chrony-helper state after stopping chronyd (#1971697)
  - add gcc-c++ and make to build requirements
  - move default paths in /var/run to /run


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2-1
changelog:
  - update to 4.2 (#2062356)
  - fix chrony-helper to delete sources by their original name (#2061660)
  - update ntp2chrony script (#2018045 #2063766)


author: Matej Marusak <mmarusak@redhat.com> - 261-1
changelog:
  - storage: Unmounting or deleting a busy filesystem is now supported
  - Tests improvements and stabilization
  - Machines: Delete disks only after VM is successfully undefined and destroyed (rhbz#2031678)
  - Machines: Do not change "startVm" value when selecting Unattended installation (rhbz#2033603)


author: Martin Pitt <mpitt@redhat.com> - 263-1
changelog:
  - Overview: Show scheduled shutdowns
  - Networking: Add firewall service description
  - Shell: Fix browser history


author: Martin Pitt <mpitt@redhat.com> - 269-1
changelog:
  - Show base-10 units by default (rhbz#1970119)
  - Apps: Fix i18n (rhbz#2018389)
  - Software Updates: Install kpatches only (rhbz#2039989)
  - Machines: Fix deleting net interfaces with non-unique MAC address (rhbz#1867478)
  - Machines: Create disks with random/customizable serial number (rhbz#2036330)
  - Machines: Fix network interface source icon (rhbz#2063680)


author: Martin Pitt <mpitt@redhat.com> - 273-1
changelog:
  - Software Updates: Optionally reboot after updating
   - Machines: Show toast notication if VM's storage deletion fails (rhbz#2105984)


author: Martin Pitt <mpitt@redhat.com> - 264-1
changelog:
  - Metrics: Improve layout on small resolutions
   - Networking: Fix checkpoint handling and IP settings dialog (rhbz#2056386)
   - Services: Show error message instead of eternal "Loading..." state
   - Accounts: Add override button to confirm weak password
   - Accounts: Fix parsing of "last login" date


author: Matej Marusak <mmarusak@redhat.com> - 269-1
changelog:
  - Kdump: Show journal when service fails (rhbz#2062297)
   - Parse /proc/cpuinfo on s390x (rhbz#2069552)
   - bridge: Default "init-superuser" to "none" (rhbz#2071938)
   - Animate new rows in lists
   - Crypto policies support
   - Metrics: Show busiest CPU core
   - Metrics: Show Podman containers in top CPU and memory lists
   - Standardize on SI-based units for data sizes and rates


author: Martin Pitt <mpitt@redhat.com> - 270-1
changelog:
  - Services: User-created timer deletion
   - System Diagnostics: Working with diagnostic reports has been improved


author: Martin Pitt <mpitt@redhat.com> - 273-1
changelog:
  - Metrics: Display CPU temperature
   - Networking: Suggest netmask and gateway addresses
   - Software Updates: Optionally reboot after updating
   - cockpit/ws container: Support modern SSH keys


author: Jonathan Lebon <jlebon@redhat.com> - 0.9.1-4
changelog:
  - Add xz-devel BR to ensure we're not bundling
    Related: https://bugzilla.redhat.com/show_bug.cgi?id=1974453


author: Antonio Murdaca <runcom@redhat.com> - 0.9.1-19
changelog:
  - add a new coreos-installer-dracut subpkg to include just the
    dracut module (fedora-iot/coreos-installer-dracut)


author: Kamil Dudka <kdudka@redhat.com> - 8.30-5
changelog:
  - sync: fix open() fallback bug (#1602463)
  - fix implicit declaration warning in coreutils-getgrouplist.patch (#1602463)


author: Kamil Dudka <kdudka@redhat.com> - 8.30-8
changelog:
  - df --local: recognize afs, auristorfs, and smb3 as remote fs (#1798030)
  - fix formatting of sha512sum(1) man page (#1688744)


author: Kamil Dudka <kdudka@redhat.com> - 8.30-9
changelog:
  - split: fix --number=K/N to output correct part of file (#1921246)
  - rm: do not skip files upon failure to remove an empty dir (#1905481)
  - use statx instead of stat when available (#1760300)


author: Kamil Dudka <kdudka@redhat.com> - 8.30-13
changelog:
  - ls, stat: avoid triggering automounts (#2044981)
  - make `df --direct` work again (#2058686)
  - doc: improve description of the --kibibytes option of ls (#1527391)


author: Marek Polacek <polacek@redhat.com> 8.5.0-13
changelog:
  - require docbook-style-xsl instead of docbook5-style-xsl (#2073888)
  - backport Default widths with -fdec-format-defaults patch (#2074614)


author: Dave Anderson <anderson@redhat.com> - 1.3.1-3
changelog:
  - Fix x86_64 "invalid structure member offset: thread_struct_fs"
    Resolves: rhbz#1589019
  - Fix arm64 "invalid structure member offset: thread_struct_fpsimd_state"
    Resolves: rhbz#1625810


author: Bhupesh Sharma <bhsharma@redhat.com> - 1.5.1-1
changelog:
  - Rebase crash-gcore-command to github upstream version crash-gcore-command-1.5.1
    Resolves: rhbz#1851747


author: Bhupesh Sharma <bhsharma@redhat.com> - 1.6.0-1
changelog:
  - Rebase crash-gcore-command to github upstream version crash-gcore-command-1.6.0
    Resolves: rhbz#1903465


author: Tao Liu <ltao@redhat.com> - 1.6.3-2
changelog:
  - Rebase to upstream crash-gcore-command-1.6.3
  - Fix memory allocation failure issue
  - Resolves: rhbz#2060355


author: Nicola Sella <nsella@redhat.com> - 0.16.2-1
changelog:
  - Update to 0.16.2
  - Add module metadata support to createrepo_c (RhBug:1795936)
  - Fix various memory leaks


author: Pavla Kratochvilova <pkratoch@redhat.com> - 0.17.2-1
changelog:
  - Update to 0.17.2
  - Fix Python deprecation (PY_SSIZE_T_CLEAN) (RhBug:1891785)
  - Revert back to old c API for destination file of cr_compress_file_with_stat and cr_compress_file to prevent a memory leak
  - Disable drpm for RHEL >= 9 (RhBug:1914828)
  - Setting updated/issued_date to None doesn't produce garbage values (RhBug:1921715)
  - Allow taking __repr__ (__str__) of closed xmlfile and sqlite (RhBug:1913465)


author: Pavla Kratochvilova <pkratoch@redhat.com> - 0.17.7-1
changelog:
  - Update to 0.17.7
  - Remove insecure hashes SHA-1 and MD5 from the default build (RhBug:1935486)
  - Fix error when updating repo with removed modules metadata
  - Exit with status code 1 when loading of repo's metadata fails
  - Fix memory leaks (RhBug:1998426)
  - Fix valgrind warnings caused by subprocess calls


author: Pavla Kratochvilova <pkratoch@redhat.com> - 0.17.7-4
changelog:
  - Switch default of --keep-all-metadata to TRUE and add --discard-additional-metadata (RhBug:1992209)


author: Vladis Dronov <vdronov@redhat.com> - 15.9-8
changelog:
  - Fix a double-free in changestring() (bz1886165)
  - Update Requires to include coreutils and ed
  - Adjust cscope-coverity-fixes.patch removing the fclose(script) chunk
  - Adjust BuildRequires and remove trailing spaces
  - Remove older source version from .gitignore
  - Rename cscope-invindex-sizing.patch as it is for the older upstream version


author: Pavel Filipenský <pfilipen@redhat.com> - 4.15.5-6
changelog:
  - resolves: rhbz#2059151 - Fix username map for unix groups
  - resolves: rhbz#2065212 - Fix 'create krb5 conf = yes` when a KDC has a single IP address.


author: Pavel Filipenský <pfilipen@redhat.com> - 4.16.3-0
changelog:
  - related: rhbz#2077468 - Rebase Samba to 4.16.3
  - resolves: rhbz#2106672 - The pcap background queue process should not be stopped
  - resolves: rhbz#2106263 - Fix crash in rpcd_classic
  - resolves: rhbz#2100093 - Fix net ads info returns LDAP server and LDAP server name


author: Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-46
changelog:
  - 2074684 - lp to a remote server takes a long time
  - 2074736 - CUPS is too chatty about "Removing document files." in debug mode


author: Kamil Dudka <kdudka@redhat.com> - 7.61.1-18
changelog:
  - http: send payload when (proxy) authentication is done (#1918692)
  - curl: Inferior OCSP verification (CVE-2020-8286)
  - libcurl: FTP wildcard stack overflow (CVE-2020-8285)
  - curl: trusting FTP PASV responses (CVE-2020-8284)


author: Kamil Dudka <kdudka@redhat.com> - 7.61.1-19
changelog:
  - make `curl --head file://` work as expected (#1947493)
  - prevent automatic referer from leaking credentials (CVE-2021-22876)


author: Kamil Dudka <kdudka@redhat.com> - 7.61.1-21
changelog:
  - fix TELNET stack contents disclosure again (CVE-2021-22925)
  - fix TELNET stack contents disclosure (CVE-2021-22898)
  - fix bad connection reuse due to flawed path name checks (CVE-2021-22924)
  - disable metalink support to fix the following vulnerabilities
      CVE-2021-22923 - metalink download sends credentials
      CVE-2021-22922 - wrong content via metalink not discarded


author: Kamil Dudka <kdudka@redhat.com> - 7.61.1-22
changelog:
  - fix STARTTLS protocol injection via MITM (CVE-2021-22947)
  - fix protocol downgrade required TLS bypass (CVE-2021-22946)


author: Kamil Dudka <kdudka@redhat.com> - 7.61.1-23
changelog:
  - fix credential leak on redirect (CVE-2022-27774)
  - fix auth/cookie leak on redirect (CVE-2022-27776)
  - fix OAUTH2 bearer bypass in connection re-use (CVE-2022-22576)


author: Kamil Dudka <kdudka@redhat.com> - 7.61.1-24
changelog:
  - fix too eager reuse of TLS and SSH connections (CVE-2022-27782)
  - fix invalid type in printf() argument detected by Coverity


author: Kamil Dudka <kdudka@redhat.com> - 7.61.1-25
changelog:
  - setopt: enable CURLOPT_SSH_KNOWNHOSTS and CURLOPT_SSH_KEYFUNCTION (#2063703)
  - fix HTTP compression denial of service (CVE-2022-32206)
  - fix FTP-KRB bad message verification (CVE-2022-32208)


author: Martin Osvald <mosvald@redhat.com> - 3.0.7-24
changelog:
  - Resolves: #1911689 - Fatal error when running "squatter -r user"
  - Resolves: #1941255 - Wait for network-online target
  - Resolves: #1918780 - "(null)" partitions in ctl_mboxlist


author: Jeff Moyer <jmoyer@redhat.com> - 67-1.el8
changelog:
  - Rebase to v67.  This brings in the following features:
    - support for the 'security frozen' sysfs attribute
    - support for using pmem as system ram
    - various cleanup and bug fixes
  - Fix load-keys failure in initramfs (Jeff Moyer)
  - Resolves: bz#1724531 bz#1730673 bz#1741164 bz#1741165 bz#1749888 bz#1749889


author: Jeff Moyer <jmoyer@redhat.com> - 71.1-4.el8
changelog:
  - Pull in fixes from upstream v72 and v73 (Jeff Moyer)
    - Fix enable-namespace all reporting errors incorrectly
    - Add support for inject-smart on papr scm
  - Related: bz#2090190 bz#1986185 bz#2040074


author: Ray Strode <rstrode@redhat.com> - 1:1.12.8-22
changelog:
  - Use hangup signal instead of termination signal to
    kill sesssion monitoring script to appeach tcsh.
    Related: #2089362


author: Ray Strode <rstrode@redhat.com> - 1:1.12.8-23
changelog:
  - Address race for very short running sessions in SSH
    session monitoring script.
    Related: #2089362


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.4-20
changelog:
  - Add 0079-libmultipath-use-typedef-for-keyword-handler-and-pri.patch
  - Add 0080-libmultipath-print-the-correct-file-when-parsing-fai.patch
  - Add 0081-libmultipath-pass-file-and-line-number-to-keyword-ha.patch
  - Add 0082-libmultipath-make-set_int-take-a-range-for-valid-val.patch
  - Add 0083-libmultipath-improve-checks-for-set_str.patch
  - Add 0084-libmultipath-split-set_int-to-enable-reuse.patch
  - Add 0085-libmultipath-cleanup-invalid-config-handling.patch
  - Add 0086-libmultipath-don-t-return-error-on-invalid-values.patch
    * Above 8 patches fix bz #1900595
  - Add 0087-multipathd-avoid-unnecessary-path-read-only-reloads.patch
    * Fixes bz #2009624
  - Resolves: bz #1900595, #2009624, #2021823


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.4-21
changelog:
  - Add 0088-libmultipath-make-helper-function-to-trigger-path-ue.patch
  - Add 0089-multipathd-trigger-udev-change-on-path-addition.patch
  - Resolves: bz #1862032


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.4-23
changelog:
  - Add 0091-multipath-tools-add-HPE-MSA-1060-2060-to-hwtable.patch
    * Partial fix for bz #2058222
  - Add 0092-multipath-tools-update-mpp-force_readonly-in-ev_add_.patch
    * Fixes bz #2065468
  - Add 0093-updated-HPE-MSA-builtin-config.patch
    * Fixes bz #2058222
  - Resolves bz #2065468, #2058222


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.4-24
changelog:
  - Add 0094-multipath-return-failure-on-an-invalid-remove-comman.patch
    * Fixes bz #2052054
  - Add 0095-libmultipath-steal-the-src-string-pointer-in-merge_s.patch
  - Add 0096-libmultipath-enable-linear-ordering-of-bus-proto-tup.patch
  - Add 0097-libmultipath-use-bus_protocol_id-in-snprint_path_pro.patch
  - Add 0098-libmultipath-make-protocol_name-global.patch
  - Add 0099-libmultipath-add-a-protocol-subsection-to-multipath..patch
  - Add 0100-libmultipath-Set-the-scsi-timeout-parameters-by-path.patch
  - Add 0101-libmultipath-check-the-overrides-pctable-for-path-va.patch
  - Add 0102-libmultipath-fix-eh_deadline-documentation.patch
  - Add 0103-libmultipath-Add-documentation-for-the-protocol-subs.patch
  - Add 0104-libmultipath-use-symbolic-value-for-invalid-pcentry.patch
    * The above 10 patches implement feature from bz #2065477
  - Resolves: bz #2052054, #2065477


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.4-25
changelog:
  - Add 0105-multipathd-handle-fpin-events.patch
  - Add 0106-multipathd-disallow-changing-to-from-fpin-marginal-p.patch
  - Resolves: bz #2083077


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.4-27
changelog:
  - Add 0108-multipathd-Add-missing-ctype-include.patch
  - Add 0109-multipathd-replace-libreadline-with-libedit.patch
    * replace readline with libedit, to avoid license conflicts
  - Resolves: bz #2119887


author: Marian Csontos <mcsontos@redhat.com> - 0.8.5-3
changelog:
  - Remove obsolete pool-inactive option from thin_trim man page.
  - Check input file exists eralier, and prevent writing incorrect metadata.


author: Marian Csontos <mcsontos@redhat.com> - 0.9.0-1
changelog:
  - Update to upstream version 0.9.0.
  - Fix important issues found by static analysis.
  - Update crc32c to version 0.5 supporting non x86 architectures.
  - New tools thin_metadata_pack and thin_metadata_unpack.


author: Christopher Snyder <csnyder@redhat.com> 1.28.24-1
changelog:
  - 1995465: Do not use deprecated collections.MutableMapping
    (jhnidek@redhat.com)
  - connection: recognize proxy errors (ptoscano@redhat.com)
  - 2020284: handle server-side consumer deletion in syspurpose commands
    (ptoscano@redhat.com)


author: Christopher Snyder <csnyder@redhat.com> 1.28.25-1
changelog:
  - syspurpose: handle users w/o organizations (ptoscano@redhat.com)
  - service-level: drop useless check (ptoscano@redhat.com)
  - 2037902: consider user-specified --org in any case (ptoscano@redhat.com)
  - 2037901: Fix organizations hint in syspurpose commands (mhorky@redhat.com)
  - 2037901: Only hint organizations if it's needed (mhorky@redhat.com)
  - 2037901: Show available organizations before asking for input
    (mhorky@redhat.com)
  - cache: fix typo in debug message (ptoscano@redhat.com)
  - 2017795: Disallowed attaching using D-Bus in SCA mode (jhnidek@redhat.com)
  - 2017795: Disallowed attaching pool in SCA mode: (jhnidek@redhat.com)
  - Extended D-Bus API - syspurpose methods; ENT-2373 (jhnidek@redhat.com)
  - 2029384: Fix bash autocompletion (mhorky@redhat.com)
  - Try to use --forked for all unit tests. (jhnidek@redhat.com)
  - Updates to cherry pick for pytest (wpoteat@redhat.com)
  - test: rename tests to default pytest filename pattern (ptoscano@redhat.com)
  - Use pytest --forked for D-Bus unit tests (jhnidek@redhat.com)
  - Added cleanup for one patcher; fixed some comments. (jhnidek@redhat.com)
  - Remove i-notify watchers on the end of the loop (jhnidek@redhat.com)
  - Remove outdated comments from the coverage Jenkins job (mhorky@redhat.com)
  - ENT-4252: Migrate from nose to pytest (mhorky@redhat.com)
  - Remove PyXML leftovers (ptoscano@redhat.com)
  - 2024589: fix format of HTTP-date headers (ptoscano@redhat.com)
  - connection: move HTTP-date formatting to own helper (ptoscano@redhat.com)
  - Ensure datetime.timezone.utc objects for parsed UTC dates
    (ptoscano@redhat.com)
  - Cockpit plugin: display syspurpose card without attributes
    (jhnidek@redhat.com)
  - 2000326: Fixed partially subscribed product in Cockpit plugin
    (jhnidek@redhat.com)
  - Update translation files (noreply@weblate.org)
  - 2024930: build: fix build on 'build' target (ptoscano@redhat.com)
  - Add 8.6 releaser (csnyder@redhat.com)
  - 2023392: libdnf: respect environment CFLAGS (ptoscano@redhat.com)


author: Christopher Snyder <csnyder@redhat.com> 1.28.26-1
changelog:
  - 2049441: [1.28] Cockpit registration dialog: enable insights by default
    (jhnidek@redhat.com)
  - Reverting disabling AutoAttach() and PoolAttach() in SCA mode
    (jhnidek@redhat.com)
  - 2046302: Apply Conscious language initiative changes (mhorky@redhat.com)
  - ENT-4671: Improve debug logging to stdout (mhorky@redhat.com)
  - Fix indentation of ProductStatus. (jhnidek@redhat.com)
  - 2028969: Do not try to load compliance status from cache (jhnidek@redhat.com)
  - Fixed last bits related to updated D-Bus Register method.
    (jhnidek@redhat.com)
  - Refactoring of temporary disablement of dir watchers. (jhnidek@redhat.com)
  - Ignore enable_content option in RegisterWithActivationKeys()
    (jhnidek@redhat.com)
  - Use benefits of enable_content in cockpit plugin. (jhnidek@redhat.com)
  - Added enable_content option to Register() D-Bus method (jhnidek@redhat.com)
  - Added refresh() method to entitlement service (jhnidek@redhat.com)
  - Fixed issue with status cache (jhnidek@redhat.com)
  - Add information about content access mode to consumer (jhnidek@redhat.com)
  - cockpit: fix system installation of subscription-manager
    (ptoscano@redhat.com)
  - New extraction for translatable strings (ptoscano@redhat.com)
  - Adding permissive coverage publishing (jmolet@redhat.com)
  - WIP: try to not use junit('coverage.xml') (jhnidek@redhat.com)
  - 2024573: [1.28] Do not delete cache of content_access during refresh
    (jhnidek@redhat.com)


author: Christopher Snyder <csnyder@redhat.com> 1.28.27-1
changelog:
  - Update translation files (noreply@weblate.org)
  - 1887600: Use updated cert with SHA-256 algorithm (jhnidek@redhat.com)
  - 2046516: register: do not check environments w/ activation keys
    (ptoscano@redhat.com)
  - No-op refactor of RegisterCommand._process_environments()
    (ptoscano@redhat.com)
  - environments: fix list for account in env-less org (ptoscano@redhat.com)
  - 1994056: Multiple environment capability (wpoteat@redhat.com)


author: Christopher Snyder <csnyder@redhat.com> 1.28.28-1
changelog:
  - Revert "1887600: Use updated cert with SHA-256 algorithm"
    (csnyder@redhat.com)
  - environments: fix usage of injection (ptoscano@redhat.com)


author: Christopher Snyder <csnyder@redhat.com> 1.28.30-1
changelog:
  - Add 8.7 tito releaser (csnyder@redhat.com)
  - spec: relax subscription-manager-rhsm-certificates requires
    (ptoscano@redhat.com)
  - 2073347: [1.28] Print correct status, when access mode has changed
    (jhnidek@redhat.com)
  - 2056896: Handle all exceptions of gathering data properly
    (jhnidek@redhat.com)
  - Improve azure determination method (suttner@atix.de)
  - ENT-4939: [1.28] Drop old dbus_interface.py (mhorky@redhat.com)
  - cockpit: Read files in /var/lib/insights as superuser (mvollmer@redhat.com)
  - refresh: clear also the release status (ptoscano@redhat.com)
  - 2074111: clear the release cache on release change (ptoscano@redhat.com)
  - 1.28 Add gcp_license_codes to system facts. (jhnidek@redhat.com)
  - build: always build & ship syspurpose bits (ptoscano@redhat.com)
  - 2057732: [1.28] Fix inaccurate module status in combined profile
    (jhnidek@redhat.com)
  - 2064002: fix named argument for registerConsumer() (ptoscano@redhat.com)
  - 2057053: Improve API of detection of cloud-what (jhnidek@redhat.com)
  - 2057053: Facts: do no use heuristics detection of cloud (jhnidek@redhat.com)
  - 2018215: Cockpit use "Organization ID" in label (jhnidek@redhat.com)
  - 1822242: Cockpit: another improvement of curtain view (jhnidek@redhat.com)
  - 1822242: cockpit: improve handling of main curtain view (ptoscano@redhat.com)


author: Christopher Snyder <csnyder@redhat.com> 1.28.31-1
changelog:
  - Translated using Weblate (Korean) (simmon@nplob.com)
  - Update translation files (noreply@weblate.org)
  - Translated using Weblate (Chinese (Simplified) (zh_CN)) (suanand@redhat.com)
  - New extraction for translatable strings (ptoscano@redhat.com)
  - 2043331: Do not delete installed SCA cert during registration
    (jhnidek@redhat.com)
  - Translated using Weblate (Korean) (simmon@nplob.com)
  - build: fix extraction of cockpit messages (ptoscano@redhat.com)
  - cockpit: Fix continuation lines for gettext strings (ptoscano@redhat.com)
  - 1822242: cockpit: fix/simplify the loading/error view checks
    (ptoscano@redhat.com)
  - 2076522: enable sslverifystatus on repos if advertized by CP
    (ptoscano@redhat.com)
  - RepoUpdateActionCommand: lazy load the consumer auth (ptoscano@redhat.com)
  - 2071622: Updated redhat-uep.pem to not use SHA-1 algorithm
    (jhnidek@redhat.com)
  - cockpit: insights: properly show error message in Insights dialog
    (ptoscano@redhat.com)
  - cockpit: insights: fix formatting of multiline insights-client output
    (ptoscano@redhat.com)
  - cockpit: insights: improve handling of registration/unregistration errors
    (ptoscano@redhat.com)
  - cockpit: insights: merge insights-client stderr with stdout
    (ptoscano@redhat.com)
  - cockpit: Remove extra toString() call (ptoscano@redhat.com)


author: Christopher Snyder <csnyder@redhat.com> 1.28.32-1
changelog:
  - cockpit: Allow unexpected message from RHEL 8.5 version of cockpit-ws
    (martin@piware.de)
  - test: use --track-naughties option (martin@piware.de)
  - Bump cockpit test API to 273 + run-tests scheduler fix (martin@piware.de)
  - ENT-5215: Handle all exceptions caused by network problems
    (mhorky@redhat.com)
  - ENT-5215: Handle errors raised in DNF plugin (mhorky@redhat.com)
  - Translated using Weblate (Chinese (Simplified) (zh_CN)) (ljanda@redhat.com)


author: Petr Menšík <pemensik@redhat.com> - 2.79-15
changelog:
  - Fix various issues in dnssec validation (CVE-2020-25681)
  - Accept responses only on correct sockets (CVE-2020-25684)
  - Use strong verification on queries (CVE-2020-25685)


author: Michal Hlavinka <mhlavink@redhat.com> - 1:2.3.8-3
changelog:
  - fix CVE-2020-10957 dovecot: malformed NOOP commands leads to DoS (#1840354)
  - fix CVE-2020-10958 dovecot: command followed by sufficient number of newlines
    leads to use-after-free (#1840357)
  - fix CVE-2020-10967 dovecot: sending mail with empty quoted localpart
    leads to DoS (#1840356)


author: Michal Hlavinka <mhlavink@redhat.com> - 1:2.3.8-4
changelog:
  - fix CVE-2020-12100 resource exhaustion via deeply nested MIME parts (#1866756)
  - fix CVE-2020-12673 out of bound reads in dovecot NTLM implementation (#1866761)
  - fix CVE-2020-12674 crash due to assert in RPA implementation (#1866768)


author: Michal Hlavinka <mhlavink@redhat.com> - 1:2.3.8-6
changelog:
  - fix mail storage block count parsing (#1894418)
  - MIME parser crashed when boundaries were wrong (#1888111)


author: Michal Hlavinka <mhlavink@redhat.com> - 1:2.3.16-1
changelog:
  - dovecot updated to 2.3.16, pigeonhole to 0.5.16
  - fix CVE-2021-33515 plaintext commands injection (#1980014)


author: Lukas Nykryn <lnykryn@redhat.com> - 049-151.git20210719
changelog:
  - Drop 51-dracut-rescue-postinst.sh entirely
  - fix(fips): add dh and ecdh ciphers
  - 35network-legacy: discard pointless RTNETLINK message
  - 95fcoe: don't install if there is no FCoE hostonly devices
  - 95nfs: set correct ownership and permissions for statd 
  - fix(dracut.sh): harden dracut against GZIP environment
  - fix(multipath): stop multipath before udev db cleanup
  - fix(dracut-functions): implement a cache for get_maj_min
  - fix(dracut-functions): get_maj_min without
  - fix(fcoe): rd.nofcoe=0 should disable fcoe
  - fix(fcoe): rename rd.nofcoe to rd.fcoe
  - fix(mdraid): remove offroot
  - fix(mdraid): add grow continue service
  - net-lib.sh: support infiniband network mac addresses
  - 95nvmf: add nvmf-autoconnect script


author: Lukas Nykryn <lnykryn@redhat.com> - 049-188.git20210802
changelog:
  - dracut-functions: fix botched backport
  - squash: unsquash the root image instead of mounting it on
  - 99squash: fail early if can't install require modules in
  - 99squash: Don't hardcode the squash sub directories
  - 99squash: improve pre-requirements check
  - Fixed some SUSE specific typos and outputs
  - 99squash: simplify the code
  - 99squash: Check require module earlier, and properly
  - fix(99squash): use kernel config instead of modprobe to check
  - kill bogus comment
  - busybox: simplify listing of supported utilities
  - fix: use find_binary
  - fix: shellcheck for modules.d/99squash/setup-squash.sh
  - fix: shellcheck for modules.d/99squash/clear-squash.sh
  - fix: shellcheck for modules.d/99squash/module-setup.sh
  - fix(squash): this module shouldn't depend on bash
  - refactor(squash): move the post install scripts into the
  - fix: revise squash module checks
  - fix(squash): post install should be the last step before
  - refactor(squash): move all setup code to init-squash.sh
  - feat(squash): install and depmod modules seperately
  - refactor(squash): don't record mount points in text file
  - lsinitrd: list squash content as well
  - refactor(squash): structure in a cleaner way
  - feat(squash): use busybox for early setup if available
  - feat: squash module follow --compress option
  - perf: disable initrd compression when squash module is
  - fix(squash): shellcheck for modules.d/99squash
  - fix(squash): don't mount the mount points if already mounted
  - feat(squash): install umount util
  - fix(squash): create relative symlinks
  - fix(dracut.sh): handle '-i' option to include files beginning
  - fix(dracut.sh): handle symlinks appropriately while using
  - fix(squash): keep ld cache under initdir
  - dracut-functions: backport block_is_* functions
  - fix(squash): fixes related to squash module rebase
  - fix(squash): remove tailing '/' when installing ld.so.conf.d


author: Pavel Valena <pvalena@redhat.com> - 049-201.git20220131
changelog:
  - ci: introduce C8S based GHA CI
  - ci: backport TEST-21-NFS-NM
  - dracut.sh: fix early microcode detection logic
  - fix(url-lib): make pre-pivot hook separetely per nfs mount
  - fix(watchdog): replace return with echo
  - fix(network): add errors and warnings when network interface
  - dracut.sh: add check for invalid configuration files
  - fips: removed false-positive 'FATAL: Module xxx not found'
  - fix(shutdown): be robust against forced shutdown
  - fix(fips): handle s390x OSTree systems


author: Pavel Valena <pvalena@redhat.com> - 049-209.git20220815
changelog:
  - fix(95iscsi): Fix network setup
  - fix(dracut-systemd): correct service dependencies
  - feat(lvm): add new module lvmthinpool-monitor
  - fix(dracut-shutdown): add cleanup handler on failure


author: Stan Cox <scox@redhat.com> - 10.1.0-4
changelog:
  - Resolves: rhbz#963475 dyninst must be ported to aarch64
    Remove Requires: glibc-static from %package testsuite


author: Lukas Czerner <lczerner@redhat.com> 1.45.4-1
changelog:
  - Rebase to the release 1.45.4 (#1783777)
  - provide rhel6/7 compatible fs_type in mke2fs.conf (#1780279)
  - fix crafted ext4 partition leads to out-of-bounds write (#1768709)
  - include note about supported rhel8 features and options (#1788573)


author: Lukas Czerner <lczerner@redhat.com> 1.45.6-5
changelog:
  - Update e2fsprogs with upstream fixes and improvements (#2083621)
  - Fix out-of-bounds read/write via crafter filesystem (#2073548)


author: Lyude Paul <lyude@redhat.com> - 8.4.0-2.20181118git1830dcb
changelog:
  - Start using proper git version strings for rawhide
  - Enabling building of wayland and freetype demos


author: Mark Wielaard <mjw@redhat.com> - 0.182-1
changelog:
  - Upgrade to upstream 0.182
    - backends: Support for tilegx has been removed.
    - config: New /etc/profile.d files to provide default $DEBUGINFOD_URLS.
    - debuginfod: More efficient package traversal, tolerate various
      errors during scanning, grooming progress is more visible and
      interruptible, more prometheus metrics.
    - debuginfod-client: Now supports compressed (kernel) ELF images.
    - libdwfl: Add ZSTD compression support.


author: Mark Wielaard <mjw@redhat.com> - 0.186-1
changelog:
  - Upgrade to upstream 0.186
    - debuginfod-client: Default $DEBUGINFOD_URLS is computed from
      drop-in files /etc/debuginfod/*.urls rather than
      hardcoded into the /etc/profile.d/debuginfod*
      scripts.
      Add $DEBUGINFOD_MAXSIZE and $DEBUGINFOD_MAXTIME settings
      for skipping large/slow transfers.
      Add $DEBUGINFOD_RETRY for retrying aborted lookups.
    - debuginfod: Supply extra HTTP response headers, describing
      archive/file names that satisfy the requested buildid content.
      Support -d :memory: option for in-memory databases.
      Protect against loops in federated server configurations.
      Add -r option to use -I/-X regexes for grooming stale files.
      Protect against wasted CPU from duplicate concurrent requests.
      Limit the duration of groom ops roughly to rescan (-t) times.
      Add --passive mode for serving from read-only database.
      Several other performance improvements & prometheus metrics.
    - libdw: Support for the NVIDIA Cuda line map extensions.
      DW_LNE_NVIDIA_inlined_call and DW_LNE_NVIDIA_set_function_name
      are defined in dwarf.h. New functions dwarf_linecontext and
      dwarf_linefunctionname.
    - translations: Update Japanese translation.


author: Mark Wielaard <mjw@redhat.com> - 0.187-4
changelog:
  - Upgrade to elfutils 0.187
    - debuginfod: Support -C option for connection thread pooling.
    - debuginfod-client: Negative cache file are now zero sized instead
      of no-permission files.
    - addr2line: The -A, --absolute option, which shows file names
      includingthe full compilation directory is now the
      default.  To get theold behavior use the new option --relative.
    - readelf, elflint: Recognize FDO Packaging Metadata ELF notes
    - libdw, debuginfo-client: Load libcurl lazily only when files need
      to be fetched remotely. libcurl is now never loaded when
      DEBUGINFOD_URLS is unset. And whenDEBUGINFOD_URLS is set,
      libcurl is only loaded when the debuginfod_begin function is
      called.
  - Add elfutils-0.187-csh-profile.patch
  - Add elfutils-0.187-debuginfod-client-fd-leak.patch
  - Add elfutils-0.187-mhd_no_dual_stack.patch
  - Add elfutils-0.187-mhd_epoll.patch
  - Add an explicit versioned requires from elfutils-debuginfod-client
    on elfutils-libs and elfutils-libelf.
  - Remove brew testsuite workarounds


author: Tomas Orsava <torsava@redhat.com> - 4.1.2-2
changelog:
  - Switch hardcoded python3 shebangs into the %{__python3} macro
  - Add missing BuildRequires on python3-devel so that %{__python3} macro is
    defined


author: Jack Magne <jmagne@redhat.com> - 1.1.2-10
changelog:
  - Resolves: rhbz#1679659 - esc changes blocked until gating tests are added.
  - Added notification list in yaml file, so entities are notified of changes.


author: Jack Magne <jmagne@redhat.com> - 1.1.2-11
changelog:
  - Resolves: rhbz#1724787 - ESC - HTTP GET Requests incorrectly Being Sent To TPS for Token Operations [8.2] 
  - Resolves: rhbz#1734117 - ESC does not detect/recognize both clean and formatted (with phone home) smart cards
  - Resolves: rhbz#1733645 - Gemalto, CAC, SCP01 cards are not detected by HP keyboard KUS1206 with builtin smartcard reader


author: Jack Magne <jmagne@redhat.com> - 1.1.2-12
changelog:
  - Resolves: rhbz#1646486 - alt tokens not detected by ESC
  - Resolves: rhbz#1774750 - ESC's unusual behavior after formatting a blank Gemalto token
  - Resolves: rhbz#1774770 - After formatting a Gemalto/SCP03 token, ESC shows incorrect Issuer, Issued To, Status, and Token ID details


author: Jack Magne <jmagne@redhat.com> - 1.1.2-20
changelog:
  - Resolves: rhbz#1970565 - Create explicit pcsc-lite requrement to assure recent pcsc-lite fix [rhel-8.4.0.z]


author: Jack Magne <jmagne@redhat.com> - 1.1.2-21
changelog:
  - Resolves: rhbz#1970565 - Create explicit pcsc-lite requrement to assure recent pcsc-lite fix [rhel-8.4.0.z], bump release # respin.


author: Jack Magne <jmagne@redhat.com> - 1.1.2-23
changelog:
  - Resolves: rhbz#1970565 - Create explicit pcsc-lite requrement to assure recent pcsc-lite fix [rhel-8.4.0.z], bump release # respin.
  - Adjust final pcsc-lite package requirement.


author: Jack Magne <jmagne@redhat.com> - 1.1.2-24
changelog:
  - Resolves: rhbz#1905691 - Volkswagen Siemens CardOS M4.4 and 5.0 cards display incorrect status in ESC.


author: Milan Crha <mcrha@redhat.com> - 3.28.5-7
changelog:
  - Add patch for RH bug #1764818 (Sync CategoryList with mail Labels)
  - Add patch for RH bug #1765005 (Send meeting change notifications only if being the organizer)


author: Milan Crha <mcrha@redhat.com> - 3.28.5-10
changelog:
  - Resolves: #1886026 (Simplify OAuth2 for outlook.office365.com server)
  - Resolves: #1885229 (Allow change of the Microsoft 365 OAuth2 endpoints)


author: Radovan Sroka <rsroka@redhat.com> - 0.9.1-2
changelog:
  RHEL 8.2 ERRATUM
  - rebase to v0.9.1
  - updated default configuration with new syntax
  - removed daemon mounts configuration
  Resolves: rhbz#1759895
  - default fapolicyd policy prevents Ansible from running
  - added ansible rule to default ruleset
  Resolves: rhbz#1746464
  - suspicious logs on service start
  Resolves: rhbz#1747494
  - fapolicyd blocks dracut from generating initramfs
  - added dracut rule to default configuration
  Resolves: rhbz#1757736
  - fapolicyd fails to identify perl interpreter
  Resolves: rhbz#1765039


author: Radovan Sroka <rsroka@redhat.com> - 0.9.1-3
changelog:
  RHEL 8.2 ERRATUM
  - fixed build time python interpreter detection (spec)
  - added python2-devel as a BuildRequires (spec)
  - allow running bash scripts in home directories
  Resolves: rhbz#1801872


author: Radovan Sroka <rsroka@redhat.com> - 1.0-2
changelog:
  RHEL 8.3 ERRATUM
  - rebase to v1.0
  - installed multiple policies to /usr/share/fapolicyd
    - known-libs (default)
    - restrictive
  - installed fapolicyd.trust file
  - enhanced fapolicyd-cli
  Resolves: rhbz#1817413
  - introduced fapolicyd-selinux that provides SELinux policy module
  Resolves: rhbz#1714529


author: Radovan Sroka <rsroka@redhat.com> - 1.0.2-3
changelog:
  RHEL 8.4.0 ERRATUM
  - rebase to 1.0.2
  - strong dependency on rpm/rpm-plugin-fapolicyd
  - installed dnf-plugin is dummy and we are not using it anymore
  - enabled integrity setting
  Resolves: rhbz#1887451
  - added make check
  - Adding DISA STIG during OS installation causes 'ipa-server-install' to fail
  - fixed java detection
  Resolves: rhbz#1895435
  - dnf update fails when fapolicyd is enabled
  Resolves: rhbz#1876975
  - fapolicyd breaks system upgrade, leaving system in dead state - complete fix
  Resolves: rhbz#1896875


author: Radovan Sroka <rsroka@redhat.com> - 1.0.2-7
changelog:
  - fapolicyd abnormally exits by executing sosreport
  - fixed multiple problems with unlink()
  - fapolicyd breaks system upgrade, leaving system in dead state - complete fix
  Resolves: rhbz#1943251


author: Zoltan Fridrich <zfridric@redhat.com> - 1.0.4-2
changelog:
  RHEL 8.6.0 ERRATUM
  - rebase to 1.0.4
  - added rpm_sha256_only option
  - added trust.d directory
  - allow file names with whitespace in trust files
  - use full paths in trust files
  Resolves: rhbz#1939379
  - fix libc.so getting identified as application/x-executable
  Resolves: rhbz#1989272
  - fix fapolicyd-dnf-plugin reporting as '<invalid>'
  Resolves: rhbz#1997414
  - fix selinux DSP module definition in spec file
  Resolves: rhbz#2014445


author: Radovan Sroka <rsroka@redhat.com> - 1.1-1
changelog:
  RHEL 8.6.0 ERRATUM
  - rebase to 1.1
  Resolves: rhbz#1939379
  - introduce rules.d feature
  Resolves: rhbz#2054741
  - remove pretrans scriptlet
  Resolves: rhbz#2051485


author: Radovan Sroka <rsroka@redhat.com> - 1.1.3-8
changelog:
  RHEL 8.7.0 ERRATUM
  - rebase fapolicyd to the latest stable vesion
  Resolves: rhbz#2100087
  - fapolicyd does not correctly handle SIGHUP
  Resolves: rhbz#2070639
  - fapolicyd often breaks package updates
  Resolves: rhbz#2111243
  - drop libgcrypt in favour of openssl
  Resolves: rhbz#2111935
  - fapolicyd.rules doesn't advertise that using a username/groupname instead of uid/gid also works
  Resolves: rhbz#2103914
  - fapolicyd gets way too easily killed by OOM killer
  Resolves: rhbz#2100089
  - compiled.rules file ownership and mode
  Resolves: rhbz#2066653
  - Faulty handling of static applications
  Resolves: rhbz#2084497
  - Introduce ppid rule attribute
  Resolves: rhbz#2102563
  - CVE-2022-1117 fapolicyd: fapolicyd wrongly prepares ld.so path [rhel-8.7.0]
  Resolves: rhbz#2069121
  - Fapolicyd denies access to /usr/lib64/ld-2.28.so [rhel-8.7.0]
  Resolves: rhbz#2068105


author: Kamil Dudka <kdudka@redhat.com> - 5.33-11
changelog:
  - improve documentation of --apple in file(1) man page (#1677442)
  - improve parsing of ppc core files (#1658171)


author: Ondrej Holy <oholy@redhat.com> - 2:2.0.0-47.rc4
changelog:
  - Fix SCARD_INSUFFICIENT_BUFFER error (rhbz#1803054)
  - Do not advertise /usb in help output (rhbz#1761144)


author: Michal Ruprich <mruprich@redhat.com> - 7.5.1-1
changelog:
  - Resolves: #2018451 - Rebase of frr to version 7.5.1
  - Resolves: #1975361 - the dynamic routing setup does not work any more


author: Michal Ruprich <mruprich@redhat.com> - 7.5.1-2
changelog:
  - Resolves: #1941765 - AVCs while running frr tests on RHEL 8.4.0 Beta-1.2
  - Resolves: #1714984 - SELinux policy (daemons) changes required for package


author: Pavel Reichl <preichl@redhat.com> - 2.9.7-16
changelog:
  - Back-port max_pages support,
  - caching symlinks in kernel page cache,
  - and in-kernel readdir caching
  - Fixed rhbz#2080000


author: Richard Hughes <richard@hughsie.com> 1.5.4-1
changelog:
  - Rebase package to include support for latest OEM hardware and to
    support deploying UEFI SecureBoot dbx updates.
  - Resolves: #1870811


author: Richard Hughes <richard@hughsie.com> 1.5.5-2
changelog:
  - Do not invalidate all remote timestamps during package install to fix rpm -V.
  - Backport some important high priority fixes from upstream.
  - Resolves: #1926382


author: Richard Hughes <richard@hughsie.com> 1.5.9-3
changelog:
  - Rebase to include the SBAT metadata section to allow fixing BootHole
  - Resolves: rhbz#1933012
  - Resolves: rhbz#1932953
  - Resolves: rhbz#1932909
  - Resolves: rhbz#1932882
  - Resolves: rhbz#1932579
  - Resolves: rhbz#1932553
  - Resolves: rhbz#1932423


author: Richard Hughes <richard@hughsie.com> 1.7.1-1
changelog:
  - New upstream release
  - Backport upstream changes
  - Include support for Dell TBT4 Docking stations
  - Resolves: rhbz#1969472
  - Resolves: rhbz#1976408


author: Richard Hughes <richard@hughsie.com> 1.7.1-2
changelog:
  - Disable the Logitech bulkcontroller plugin to avoid adding a dep to protobuf-c
    which lives in AppStream, not BaseOS.
  - Resolves: rhbz#2029333


author: Richard Hughes <richard@hughsie.com> 1.7.4-1
changelog:
  - Include support for Lenovo TBT4 Docking stations
  - Do not cause systemd-modules-load failures
  - Resolves: rhbz#2038258
  - Resolves: rhbz#2037294


author: Richard Hughes <richard@hughsie.com> - 1.0-1
changelog:
  - New upstream release
  - This fixes the security bug known as CVE-2018-5345
  - Add new API for fwupd
  - Do not encode timezone in generated files
  - Fix countless memory leaks when parsing corrupt files
  - Fix the calculation of the checksum on big endian machines
  - Switch to the Meson buildsystem


author: Nick Clifton <nickc@redhat.com> - 9.21-1
changelog:
  - Initial check-in for scl-gcc-toolset-10 branch.  (#1817171)
  - Fix stack clash protection problem. (#1803173)


author: Nick Clifton <nickc@redhat.com> - 9.29-1
changelog:
  - Fix AArch64 checks in annobin plugin.  (#1873416)
  - gcc plugin: Detect any attempt to access the global_options array.
  - gcc plugin: Do not complain about missing pre-processor options when examining a preprocessed input file.  (#1862718)
  - Use more robust checks for AArch64 options.
  - Detect CLANG compiled assembler that is missing IBT support.
  - Improved target pointer size discovery.
  - Add support for installing clang and llvm plugins.
  - Temporary suppression of aarch64 pointer size check.  (#1860549)


author: Marek Polacek <polacek@redhat.com> 10.2.1-2
changelog:
  - update from Fedora gcc 10.2.1-2
  - emit debug info for C/C++ external function declarations used in the TU
    (PR debug/96383)
  - discard SHN_UNDEF global symbols from LTO debuginfo (PR lto/96385)
  - strip also -flto=auto from optflags


author: Marek Polacek <polacek@redhat.com> 10.2.1-8
changelog:
  - update from Fedora gcc 10.2.1-8 (#1878887)
  - emit DW_AT_declaration on declaration-only DIEs (#1897272, PR debug/97060)
  - add BuildRequires: make and Requires: make, the latter for -flto reasons


author: Marek Polacek <polacek@redhat.com> 10.3.1-1
changelog:
  - update from Fedora gcc 10.3.1-1 (#1929382)
  - drop gcc10-pr97060.patch
  - use --enable-cet
  - ship gcc-accel-nvptx-none-lto-dump
  - backport PR96939 fixes


author: Nick Clifton <nickc@redhat.com> - 10.71-1
changelog:
  - Initial import of annobin sources for GTS12 / RHEL8.  (#2077447)
  - gcc-plugin: Fix typo in configure.ac.


author: Nick Clifton <nickc@redhat.com> - 10.73-1
changelog:
  - Rebuild with scl macros in place.  (#2091570)
  - Annocheck: Fix handling of command line options that take arguments.  (#2086850)
  - Annocheck: Do not complain about unenabled -mbranch-protection option in AArch64 binaries.  (#2078909)


author: Nick Clifton <nickc@redhat.com> - 10.74-1
changelog:
  - Annocheck: Handle binaries created by Rust 1.18.  (#2094420)
  - Annocheck: Add optional function name to --skip arguments.  (PR 29229)


author: Nick Clifton <nickc@redhat.com> - 10.76-1
changelog:
  - Spec file: Correct the Provides for the annobin-doc subpackage.  (#2097065)
  - Annocheck: Check build-id of separate debuginfo files.
  - Annocheck: Add GAPS test replacing --ignore-gaps.
  - Annocheck: Fix covscan detected race condition between stat() and open().


author: Nick Clifton <nickc@redhat.comn> - 2.38-6
changelog:
  - Simplify the assembler's evaluation of chained .loc view expressions.  [Second attempt]  (#2059646)


author: Nick Clifton <nickc@redhat.comn> - 2.38-15
changelog:
  - Adjust Provides and Requires fields of the sub-packages.
  - Use GTS-12 gcc to build static libraries.


author: Marek Polacek <polacek@redhat.com> 11.2.1-9
changelog:
  - update from releases/gcc-11-branch (#2047286)
    - PRs fortran/104127, fortran/104212, fortran/104227, target/101529
  - fix up va-opt-6.c testcase


author: Marek Polacek <polacek@redhat.com> 12.1.1-3
changelog:
  - update from releases/gcc-12 branch
    - PRs c++/49387, c++/102307, c++/102651, c++/104470, c++/105491, c++/105589,
  	c++/105623, c++/105652, c++/105655, c++/105725, c++/105734,
  	c++/105756, c++/105761, c++/105779, c++/105795, c++/105852,
  	c++/105871, c++/105885, c++/105908, c++/105925, c++/105931,
  	c++/105964, c++/106001, c/105635, d/105544, fortran/105230,
  	gcov-profile/105535, ipa/100413, ipa/105600, ipa/105639, ipa/105739,
  	libgomp/105745, libgomp/106045, libstdc++/104731, libstdc++/105284,
  	libstdc++/105671, libstdc++/105681, middle-end/105537,
  	middle-end/105604, middle-end/105711, middle-end/105951,
  	middle-end/105998, middle-end/106030, other/105527,
  	preprocessor/105732, rtl-optimization/105455, rtl-optimization/105559,
  	rtl-optimization/105577, sanitizer/105714, sanitizer/105729,
  	target/101891, target/104871, target/105162, target/105209,
  	target/105292, target/105472, target/105556, target/105599,
  	target/105854, target/105879, target/105953, target/105960,
  	target/105970, target/105981, target/106096, tree-optimization/103116,
  	tree-optimization/105431, tree-optimization/105458,
  	tree-optimization/105528, tree-optimization/105562,
  	tree-optimization/105618, tree-optimization/105726,
  	tree-optimization/105736, tree-optimization/105786,
  	tree-optimization/105940
  - enable tsan and lsan on s390x (#2101610)
  - fix up libtsan on s390x
  - fix nvptx build (PRs bootstrap/105551, target/105938)


author: Kevin Buettner - 11.2-2
changelog:
  - On ix86, add -Wno-format-overflow to --enable-gdb-build-warnings. 
    (This is a workaround for the bogus warning/error that we now see
    on i686 regarding a "may write a terminating nul past the end of
    the destination" message for the sprintf() call in
    global_symbol_searcher::search() in gdb/symtab.c.)


author: Kevin Buettner - 11.2-3
changelog:
  - Backport upstream patch which removes sizes from debuginfod download
    messages when the size is not available (RHBZ 2068280, Aaron Merey).


author: <fjanus@redhat.com> - 1.18-2
changelog:
  - Add backward compatibility patch
  - Resolves: #2097704
  - Backport from upstream commit: 00ba17479ff31c6825f0e6f28b965f11525e83f6


author: Martin Osvald <mosvald@redhat.com> - 9.25-2
changelog:
  - Resolves: #1652937 - CVE-2018-19409 ghostscript: Improperly implemented
    security check in zsetdevice function in psi/zdevice.c
  - Resolves: #1642586 - CVE-2018-18073 ghostscript: saved execution stacks
    can leak operator arrays
  - Resolves: #1642580 - CVE-2018-17961 ghostscript: saved execution stacks
    can leak operator arrays (incomplete fix for CVE-2018-17183)
  - Resolves: #1642941 - CVE-2018-18284 ghostscript: 1Policy operator
    allows a sandbox protection bypass
  - Resolves: #1656336 - CVE-2018-19134 ghostscript: Type confusion in
    setpattern (700141)
  - Resolves: #1660571 - CVE-2018-19475 ghostscript: access bypass in
    psi/zdevice2.c (700153)
  - Resolves: #1660830 - CVE-2018-19476 ghostscript: access bypass in
    psi/zicc.c
  - Resolves: #1661280 - CVE-2018-19477 ghostscript: access bypass in
    psi/zfjbig2.c (700168)
  - Resolves: #1668891 - CVE-2019-6116 ghostscript: subroutines within
    pseudo-operators must themselves be pseudo-operators (700317)


author: Martin Osvald <mosvald@redhat.com> - 9.25-3
changelog:
  - Resolves: #1692798 - CVE-2019-3839 ghostscript: missing attack vector
    protections for CVE-2019-6116
  - Resolves: #1678170 - CVE-2019-3835 ghostscript: superexec operator
    is available (700585)
  - Resolves: #1691414 - CVE-2019-3838 ghostscript: forceput in DefineResource
    is still accessible (700576)
  - fix included for ghostscript: Regression: double comment chars
    '%' in gs_init.ps leading to missing metadata
  - fix for pdf2dsc regression added to allow fix for CVE-2019-3839


author: Martin Osvald <mosvald@redhat.com> - 9.25-5
changelog:
  - Resolves: #1744011 - CVE-2019-14811 ghostscript: Safer Mode Bypass by .forceput Exposure in .pdf_hook_DSC_Creator (701445)
  - Resolves: #1744015 - CVE-2019-14812 ghostscript: Safer Mode Bypass by .forceput Exposure in setuserparams (701444)
  - Resolves: #1744006 - CVE-2019-14813 ghostscript: Safer Mode Bypass by .forceput Exposure in setsystemparams (701443)
  - Resolves: #1744231 - CVE-2019-14817 ghostscript: Safer Mode Bypass by .forceput Exposure in .pdfexectoken and other procedures (701450)


author: Richard Lescak <rlescak@redhat.com> - 9.27-3
changelog:
  - fixed drifting text to the right when printing
  - added Requirement for jbig2dec
  - added patch for CVE-2020-16301
  - Resolves: rhbz#2097515, rhbz#2097448


author: Karsten Hopp <karsten@redhat.com> - 3.20.0-6
changelog:
  - apply upstream patch from Jonh Wendell to fix g_ptr_array_find types and make it
    build with latest glib2


author: Carlos O'Donell <carlos@redhat.com> - 2.28-209
changelog:
  - Improve dynamic loader auditing interface (LD_AUDIT) (#2047981)
  - Add dlinfo() API support for RTLD_DI_PHDR (#2097898)


author: Florian Weimer <fweimer@redhat.com> - 2.28-211
changelog:
  - Preserve GLRO (dl_naudit) internal ABI (#2119304)
  - Avoid s390x ABI change due to z16 recognition on s390x (#2119304)


author: Benjamin Berg <bberg@redhat.com> - 3.28.2-29
changelog:
  - Backport SAE/WPA3/OWE support
    Resolves: #1915411
    Resolves: #2023156
  - Add patch to fix wifi performance issue
    Resolves: #1938323


author: Benjamin Berg <bberg@redhat.com> - 3.28.2-30
changelog:
  - Fix connection list AP selection and SSID display for OWE
    Resolves: #2023156
  - Fix saving passwords for non-wifi connections
    Resolves: #1938944


author: Adam Williamson <awilliam@redhat.com> - 3.28.0-7
changelog:
  - Drop unnecessary pkgconfig(NetworkManager) BuildRequire
  - Run autoreconf to avoid automake version mismatch


author: Florian Müllner <fmuellner@redhat.com> - 3.32.2-45
changelog:
  - Fix lock up when previous focus actor is destroyed during modal
    Resolves: #2075231
  - Defend against corrupt notifications file
    Resolves: #2078564


author: Robbie Harwood <rharwood@redhat.com> - 2.06-127
changelog:
  - ppc64le: CAS improvements, prefix detection, and vTPM support
  - Resolves: #2076795
  - Resolves: #2026568
  - Resolves: #2051331


author: Robbie Harwood <rharwood@redhat.com> - 2.06-137
changelog:
  - CVE fixes for 2022-06-07
  - CVE-2022-28736 CVE-2022-28735 CVE-2022-28734 CVE-2022-28733
  - CVE-2021-3697 CVE-2021-3696 CVE-2021-3695
  - Resolves: #2070687


author: Javier Martinez Canillas <javierm@redhat.com> - 8.40-38
changelog:
  - grubby-bls: don't print rpm-sort error messages
    Resolves: rhbz#1731924
  - grubby-bls: remove -o option and support -c for ppc64le grub config
    Resolves: rhbz#1758598
  - grubby-bls: fix logic to check if the kernelopts var is defined in a BLS
    Resolves: rhbz#1726514
  - grubby-bls: don't update grubenv when generating grub.cfg for ppc64le
    Related: rhbz#1726514


author: Javier Martinez Canillas <javierm@redhat.com> - 8.40-39
changelog:
  - grubby-bls: strip only /boot from paths
    Resolves: rhbz#1738238
  - Make grubby to also update GRUB_CMDLINE_LINUX in /etc/default/grub
    Resolves: rhbz#1152027
  - grubby-bls: fix corner case when a kernel param value contains a '='
    Resolves: rhbz#1787584
  - grubby-bls: update man page to match options in current wrapper script
    Resolves: rhbz#1812065
  - grubby-bls: always escape the delimiter character used in sed commands
    Related: rhbz#1787584
  - grubby-bls: add a --no-etc-grub-update option
    Related: rhbz#1152027


author: David King <dking@redhat.com> - 3.22.30-9
changelog:
  - Fix treeview a11y refcounting (#2032438)
  - Be quiet on exit under X11 (#1887266)
  - Avoid cellarea resize crash (#2032437)


author: Ondrej Holy <oholy@redhat.com> - 1.36.2-6
changelog:
  - Prevent spawning new daemons if outgoing operation exists (#1739117)
  - Force NT1 protocol version for workgroup support (#1739116)


author: Ondrej Holy <oholy@redhat.com> - 1.36.2-7
changelog:
  - Remove libbluray support (#1747972)
  - CVE-2019-12448: Add query_info_on_read/write functionality (rhbz#1754506)
  - CVE-2019-12447: Use fsuid to ensure correct file ownership (rhbz#1752926)
  - CVE-2019-12449: Ensure correct ownership when moving to file:// uri (rhbz#1753972)


author: Luboš Uhliarik <luhliari@redhat.com> - 2.4.37-42
changelog:
  - Resolves: #2007236 - CVE-2021-40438 httpd:2.4/httpd: mod_proxy: SSRF via
    a crafted request uri-path
  - Resolves: #1969229 - CVE-2021-26691 httpd:2.4/httpd: Heap overflow in
    mod_session


author: Luboš Uhliarik <luhliari@redhat.com> - 2.4.37-43
changelog:
  - Related: #2007236 - CVE-2021-40438 httpd:2.4/httpd: mod_proxy: SSRF via
    a crafted request uri-path


author: Luboš Uhliarik <luhliari@redhat.com> - 2.4.37-44
changelog:
  - Resolves: #1968278 - CVE-2020-35452 httpd:2.4/httpd: Single zero byte stack
    overflow in mod_auth_digest
  - Resolves: #2001046 - Apache httpd OOME with mod_dav in RHEL 8
  - Resolves: #2005128 (CVE-2021-34798) - CVE-2021-34798 httpd: NULL pointer
    dereference via malformed requests
  - Resolves: #1984828 - mod_proxy_hcheck piles up health checks leading to high
    memory consumption
  - Resolves: #2005119 - CVE-2021-39275 httpd: out-of-bounds write in
    ap_escape_quotes() via malicious input


author: Luboš Uhliarik <luhliari@redhat.com> - 2.4.37-45
changelog:
  - Resolves: #2007199 - CVE-2021-36160 httpd:2.4/httpd: mod_proxy_uwsgi:
    out-of-bounds read via a crafted request uri-path
  - Resolves: #1972491 - CVE-2021-33193 httpd:2.4/mod_http2: Request splitting via
    HTTP/2 method injection and mod_proxy


author: Luboš Uhliarik <luhliari@redhat.com> - 2.4.37-46
changelog:
  - Resolves: #2035063 - CVE-2021-44790 httpd:2.4/httpd: mod_lua: possible buffer
    overflow when parsing multipart content


author: Luboš Uhliarik <luhliari@redhat.com> - 2.4.37-47
changelog:
  - Resolves: #2035030 - CVE-2021-44224 httpd:2.4/httpd: possible NULL dereference
    or SSRF in forward proxy configurations


author: Luboš Uhliarik <luhliari@redhat.com> - 2.4.37-48
changelog:
  - Resolves: #2065249 - CVE-2022-22720 httpd:2.4/httpd: HTTP request smuggling
    vulnerability in Apache HTTP Server 2.4.52 and earlier


author: Luboš Uhliarik <luhliari@redhat.com> - 2.4.37-50
changelog:
  - Resolves: #2065237 - CVE-2022-22719 httpd:2.4/httpd: mod_lua: Use of
    uninitialized value of in r:parsebody
  - Resolves: #2065267 - CVE-2022-22721 httpd:2.4/httpd: core: Possible buffer
    overflow with very large or unlimited LimitXMLRequestBody
  - Resolves: #2065324 - CVE-2022-23943 httpd:2.4/httpd: mod_sed: Read/write
    beyond bounds


author: Luboš Uhliarik <luhliari@redhat.com> - 2.4.37-51
changelog:
  - Resolves: #2097015 - CVE-2022-28614 httpd:2.4/httpd: out-of-bounds read via
    ap_rwrite()
  - Resolves: #2097031 - CVE-2022-28615 httpd:2.4/httpd: out-of-bounds read in
    ap_strcmp_match()
  - Resolves: #2097458 - CVE-2022-30522 httpd:2.4/httpd: mod_sed: DoS
    vulnerability
  - Resolves: #2097480 - CVE-2022-30556 httpd:2.4/httpd: mod_lua: Information
    disclosure with websockets
  - Resolves: #2098247 - CVE-2022-31813 httpd:2.4/httpd: mod_proxy:
    X-Forwarded-For dropped by hop-by-hop mechanism
  - Resolves: #2097451 - CVE-2022-29404 httpd:2.4/httpd: mod_lua: DoS in
    r:parsebody
  - Resolves: #2096997 - CVE-2022-26377 httpd:2.4/httpd: mod_proxy_ajp: Possible
    request smuggling


author: Miroslav Rezanina <mrezanin@redhat.com> - 0-0.28.20180415git.el8
changelog:
  - hpvd-Set-IgnoreOnIsolate-1-in-systemd-units.patch [bz#1769920]
  - Resolves: bz#1769920
    ([Hyper-V][RHEL8] Running 'systemctl isolate' on any target stops hyperv-daemon services)


author: Miroslav Rezanina <mrezanin@redhat.com> - 0-0.29.20180415git.el8
changelog:
  - hvd-Update-C-files-and-scripts-to-kernel-version-5.7-rc1.patch [bz#1816750]
  - hvd-Add-vmbus_testing-tool-build-files.patch [bz#1816750]
  - Resolves: bz#1816750
    ([Hyper-V][RHEL8.3] Update Hyper-V tools)


author: Miroslav Rezanina <mrezanin@redhat.com> - 0-0.30.20180415git.el8
changelog:
  - hvd-tools-hv-change-http-to-https-in-hv_kvp_daemon.c.patch [bz#1886104]
  - Resolves: bz#1886104
    ([Hyper-V][RHEL8.4] Update Hyper-V-Daemons)


author: Jon Maloy <jmaloy@redhat.com> - 0-0.31.20180415git.el8
changelog:
  - hpvd-Enable-build-on-aarch64.patch [bz#2020141]
  - Resolves: bz#2020141
    ([Hyper-V][RHEL8.6][ARM64] No hyperv-daemons package built for aarch64 platform)


author: Jon Maloy <jmaloy@redhat.com> - 0-0.32.20180415git.el8
changelog:
  - hpvd-hv_set_ifconfig.sh-Use-nmcli-commands.patch [bz#2065202]
  - hpvd-Use-filename-for-connection-profile.patch [bz#2065202]
  - Resolves: bz#2065202
    ([RHEL8.6][Hyper-V]The /usr/libexec/hypervkvpd/hv_set_ifconfig need update since the ifdown/ifup was not supported on RHEL8 [rhel-8.7.0])


author: Miroslav Rezanina <mrezanin@redhat.com> - 0-0.33.20180415git
changelog:
  - hpvd-hypervkvpd.service-ordering-fixes.patch [bz#2115761]
  - hpvd-redhat-Add-ConditionalVirtualization-to-the-rest-of-.patch [bz#2115761]
  - Resolves: bz#2115761
    ([Hyper-V][RHEL-8] hypervkvpd.service service ordering)


author: Honggang Li <honli@redhat.com> - 29.0-2
changelog:
  - Suppress ibdev2netdev warning messgae
  - Unversioned documentation directory
  - Resolves: bz1794904, bz1824853


author: Honggang Li <honli@redhat.com> - 32.0-1
changelog:
  - Update to upstream v32 release for features and fixes
  - Support Amazon Elastic Fabric Adapter
  - Enable pyverbs
  - Add a check for udevadm in the specfile
  - Resolves: bz1851721, bz1856076, bz1887396, bz1868804


author: Honggang Li <honli@redhat.com> - 32.0-4
changelog:
  - Update to upstream stable release v32.1
  - Fix mlx5 pyverbs CQ test
  - Resolves: bz1915745, bz1907377


author: Honggang Li <honli@redhat.com> - 37.1-1
changelog:
  - Update to upstream v37.1 release for features and fixes
  - Resolves: bz1982200, bz1990120, bz1982131


author: Jan Macku <jamacku@redhat.com> - 10.00.10-1
changelog:
  - Allow updating rfkill switch status while in readonly root mode
  - service: Prevent variables from globbing
  - Allow updating mlocate.db while in readonly root mode


author: Jan Macku <jamacku@redhat.com> - 10.00.16-1
changelog:
  - rename_device: also support dracut-style kernel cmdline configuration
  - ifup-routes: Log when using `ip $type replace`
  - ifup-routes: Use `ip route repace` to avoid race


author: Jan Macku <jamacku@redhat.com> - 10.00.17-1
changelog:
  - ifup-routes: Revert quotes
  - ifup-routes: Use `ip replace` only on type `route`
  - ci: introduce GA ci from master to rhel8-branch
  - ci: Setup packit for RHEL8 branch
  - ci: Get rid of old ci files (travis and zanata)


author: Rafael Jeffman <rjeffman@redhat.com> - 4.9.8-5
changelog:
  - ipatests: remove additional check for failed units.
    Resolves: RHBZ#2053024
  - ipa-cldap: fix memory leak.
    Resolves: RHBZ#2032738


author: Rafael Jeffman <rjeffman@redhat.com> - 4.9.8-8
changelog:
  - Backport latest test fixes in python3-ipatests
    Resolves: RHBZ#2060841
  - extdom: user getorigby{user|group}name if available
    Resolves: RHBZ#2062379
  - Set the mode on ipaupgrade.log during RPM post snipppet
    Resolves: RHBZ#2061957
  - test_krbtpolicy: skip SPAKE-related tests in FIPS mode
    Resolves: RHBZ#1909630


author: Rafael Jeffman <rjeffman@redhat.com> - 4.9.10-1
changelog:
  - Rebase to upstream release 4.9.10
    Remove upstream patches 0002 to 0016 that are part of version 4.9.10
    Remove patches 1101 that is part of version 4.9.10
    Rename patch 0001 to 1002 as it will be used in future RHEL 8 releases
    Add patches 0001 and 0002 to fix build on RHEL 8.7
    Resolves: RHBZ#2079466
    Resolves: RHBZ#2063155
    Resolves: RHBZ#1958777
    Resolves: RHBZ#2068088
    Resolves: RHBZ#2004646
    Resolves: RHBZ#782917
    Resolves: RHBZ#2059396
    Resolves: RHBZ#2092015


author: Rafael Jeffman <rjeffman@redhat.com> - 4.9.10-2
changelog:
  - Preserve user: fix the confusing summary
    Resolves: RHBZ#2022028
  - Only calculate LDAP password grace when the password is expired
    Related: RHBZ#782917


author: Rafael Jeffman <rjeffman@redhat.com> - 4.9.10-6
changelog:
  - webui: Allow grace login limit
    Resolves: RHBZ#2109243
  - check_repl_update: in progress is a boolean
    Resolves: RHBZ#2117303
  - Disabling gracelimit does not prevent LDAP binds
    Resolves: RHBZ#2109236
  - Set passwordgracelimit to match global policy on group pw policies
    Resolves: RHBZ#2115475


author: Andrea Claudi <aclaudi@redhat.com> [5.12.0-1.el8]
changelog:
  - tc: f_flower: Add missing ct_state flags to usage description (Andrea Claudi) [1957243]
  - tc: f_flower: Add option to match on related ct state (Andrea Claudi) [1957243]


author: Andrea Claudi <aclaudi@redhat.com> [5.12.0-3.el8]
changelog:
  - tc: htb: improve burst error messages (Andrea Claudi) [1910745]
  - tc: u32: Fix key folding in sample option (Andrea Claudi) [1979425]
  - police: Fix normal output back to what it was (Andrea Claudi) [1981393]
  - police: Add support for json output (Andrea Claudi) [1981393]
  - police: add support for packet-per-second rate limiting (Andrea Claudi) [1981393]
  - Update kernel headers (Andrea Claudi) [1981393]
  - mptcp: add support for port based endpoint (Andrea Claudi) [1984733]


author: Andrea Claudi <aclaudi@redhat.com> - 5.15.0-2.el8
changelog:
  - vdpa: Enable user to set mtu of the vdpa device (Andrea Claudi) [2036880]
  - vdpa: Enable user to set mac address of vdpa device (Andrea Claudi) [2036880]
  - vdpa: Enable user to query vdpa device config layout (Andrea Claudi) [2036880]
  - vdpa: align uapi headers (Andrea Claudi) [2036880]


author: Andrea Claudi <aclaudi@redhat.com> - 5.15.0-3.el8
changelog:
  - tc: u32: add json support in `print_raw`, `print_ipv4`, `print_ipv6` (Andrea Claudi) [1989591]
  - tc: u32: add support for json output (Andrea Claudi) [1989591]


author: Andrea Claudi <aclaudi@redhat.com> - 5.15.0-4.el8
changelog:
  - vdpa: Update man page with added support to configure max vq pair (Andrea Claudi) [2056827]
  - vdpa: Support reading device features (Andrea Claudi) [2056827]
  - vdpa: Support for configuring max VQ pairs for a device (Andrea Claudi) [2056827]
  - vdpa: Allow for printing negotiated features of a device (Andrea Claudi) [2056827]
  - vdpa: Remove unsupported command line option (Andrea Claudi) [2056827]
  - uapi: update vdpa.h (Andrea Claudi) [2056827]
  - Update kernel headers and import virtio_net (Andrea Claudi) [2056827]


author: Phil Sutter <psutter@redhat.com> - 1.8.4-16
changelog:
  - tests/shell: Add test for bitwise avoidance fixes
  - ebtables: Optimize masked MAC address matches
  - nft: Optimize class-based IP prefix matches
  - nft: Fix for broken address mask match detection
  - nft: cache: Make nft_rebuild_cache() respect fake cache
  - tests: shell: Improve concurrent noflush restore test a bit
  - nft: Fix for concurrent noflush restore calls
  - nft: Fix error reporting for refreshed transactions
  - nft: Make batch_add_chain() return the added batch object


author: Phil Sutter <psutter@redhat.com> - 1.8.4-17
changelog:
  - extensions: dccp: Fix for DCCP type 'INVALID'
  - tests: shell: Merge and extend return codes test
  - nft: Fix command name in ip6tables error message
  - extensions: libxt_CT: add translation for NOTRACK
  - extensions: libipt_icmp: Fix translation of type 'any'
  - tests/shell: Test for fixed extension registration
  - libxtables: Register multiple extensions in ascending order
  - libxtables: Simplify pending extension registration
  - libxtables: Make sure extensions register in revision order


author: Phil Sutter <psutter@redhat.com> - 1.8.4-18
changelog:
  - xtables-translate: Fix translation of odd netmasks
  - nft: Fix bitwise expression avoidance detection
  - xtables-monitor: 'LL=0x304' is not very convenient, print LOOPBACK instead.
  - xtables-monitor: print packet first
  - xtables-monitor: fix packet family protocol
  - xtables-monitor: fix rule printing
  - xtables-monitor: Fix ip6tables rule printing


author: Phil Sutter <psutter@redhat.com> - 1.8.4-20
changelog:
  - extensions: SECMARK: Use a better context in test case
  - extensions: sctp: Translate --chunk-types option
  - extensions: sctp: Fix nftables translation
  - extensions: SECMARK: Implement revision 1
  - nft: cache: Retry if kernel returns EINTR


author: Phil Sutter <psutter@redhat.com> - 1.8.4-21
changelog:
  - extensions: hashlimit: Fix tests with HZ=100
  - ebtables: Dump atomic waste
  - doc: ebtables-nft.8: Adjust for missing atomic-options


author: Phil Sutter <psutter@redhat.com> - 1.8.4-23
changelog:
  - libxtables: Fix unsupported extension warning corner case
  - tests: shell: Check overhead in iptables-save and -restore
  - nft: Fix EPERM handling for extensions without rev 0
  - Improve error messages for unsupported extensions
  - xshared: Fix response to unprivileged users
  - libxtables: Register only the highest revision extension
  - Use proto_to_name() from xshared in more places
  - libxtables: Boost rule target checks by announcing chain names
  - libxtables: Implement notargets hash table
  - nft: Reject standard targets as chain names when restoring
  - xshared: Merge and share parse_chain()
  - xshared: Prefer xtables_chain_protos lookup over getprotoent
  - nft: Speed up immediate parsing
  - nft: Simplify immediate parsing


author: Kairui Song <kasong@redhat.com> 2:1.4.0-2
changelog:
  - Fix several memleak problems found by covscan (bz1606969)
  - Fix an possible overflow error (bz1606969)
  - Don't leak socket fd on connection error (bz1606969)
  - Check xen-dyn-event more flexible (bz1576164)


author: Kairui Song <kasong@redhat.com> 2:1.4.0-3
changelog:
  - Update document and remove dead options to fix manpage scan warning (bz1612706)
  - Fix gating test error (bz1680619)


author: Tomas Orsava <torsava@redhat.com> - 2.6.0-5
changelog:
  - Require the Python interpreter directly instead of using the package name
  - Resolves: rhbz#1633617


author: Jakub Hrozek <jhrozek@redhat.com> - 2.6.0-7
changelog:
  - Resolves: rhbz#1634268 - ECP signature check fails with
                             LASSO_DS_ERROR_SIGNATURE_NOT_FOUND when
                             assertion signed instead of response


author: Jakub Hrozek <jhrozek@redhat.com> - 2.6.0-8
changelog:
  - Resolves: rhbz#1730018 - lasso includes "Destination" attribute in SAML
                             AuthnRequest populated with SP
                             AssertionConsumerServiceURL when ECP workflow
                             is used which leads to IdP-side errors


author: Jakub Hrozek <jhrozek@redhat.com> - 2.6.0-9
changelog:
  - Resolves: rhbz#1888195 - [RFE] release (built) python3-lasso pkg (coming
                             from lasso)


author: Jakub Hrozek <jhrozek@redhat.com> - 2.6.0-10
changelog:
  - Resolves: rhbz#1951653 - CVE-2021-28091 lasso: XML signature wrapping
                             vulnerability when parsing SAML responses [rhel-8]


author: Jakub Hrozek <jhrozek@redhat.com> - 2.6.0-11
changelog:
  - Bump release to force the package through OSCI as the previous
    build reached CI just in time for an outage
  - Related: rhbz#1888195 - [RFE] release (built) python3-lasso pkg (comingfrom lasso)


author: Jakub Hrozek <jhrozek@redhat.com> - 2.6.0-12
changelog:
  - Fix a dead code issue in the signature wrapping patch
  - Resolves: rhbz#1951653 - CVE-2021-28091 lasso: XML signature wrapping
                             vulnerability when parsing SAML responses [rhel-8]


author: Red Hat PKI Team <rhcs-maint@redhat.com> 4.8.1-1
changelog:
  - Rebase to upstream JSS v4.8.1
  - Red Hat Bugilla #1908541 - jss broke SCEP - missing PasswordChallenge class
  - Red Hat Bugilla #1489256 - [RFE] jss should support RSA with OAEP padding


author: Red Hat PKI Team <rhcs-maint@redhat.com> 4.9.3-1
changelog:
  - Rebase to JSS 4.9.3
  - Bug 2046022 - CVE-2021-4213 pki-core:10.6/jss: memory leak in TLS connection leads to OOM [rhel-8]


author: Red Hat PKI Team <rhcs-maint@redhat.com> 4.9.4-1
changelog:
  - Rebase to JSS 4.9.4
  - Bug 2013674 - JSS cannot be properly initialized after using another NSS-backed security provider


author: Ryan O'Hara <rohara@redhat.com> - 2.0.10-6
changelog:
  - Fix segfault when smtp alerts configured (#1693706)
  - Fix double free when smtp_helo_name copied from local_name (#1693706)


author: Julien Rische <jrische@redhat.com> - 1.18.2-21
changelog:
  - Backport fix of memory use after free during libkrad cleanup
  - Backport support for larger RADIUS attributes in libkrad
  - Resolves: rhbz#2103125


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 1.10-3
changelog:
  PMTUd: Fix MTU calculation when using crypto
    Resolves: rhbz#1736872
    host: Fix defrag buffer reclaim logic that could cause delivery
          of corrupted data
    ResolveS: rhbz#1761711


author: Isaac Boukris <iboukris@redhat.com> - 2.2.0-1
changelog:
  - Resolves: rhbz#1878114 - Rebase libldb to the version required by Samba
  - Resolves: rhbz#1794349 - Build libldb with lmdb support


author: Andreas Schneider <asn@redhat.com> - 2.3.0-1
changelog:
  - resolves: rhbz#1945021 - Update to version 2.3.0
  - resolves: rhbz#1897082 - Fix libldb tests on aarch64


author: Karel Zak <kzak@redhat.com> 2.32.1-28
changelog:
  - fix #1906157 - after su from root to a normal user mesg is unable to show current status
  - fix #1917852 - findmnt: add option to list all fs-independent flags
  - fix #1922299 - throws error using /sbin/nologin: invalid option -- 'c'
  - fix #1940607 - lsblk sometimes returns block devices in wrong order with --pairs
  - fix #1919529 - [RFE] RHEL-8: Support option flags with mount(8) --bind
  - fix #1946921 - RHEL8: mount --rbind -o rprivate doesn't do recursive bind mount


author: Karel Zak <kzak@redhat.com> 2.32.1-29
changelog:
  - fix #1988955 - script command continues without stopping.
  - fix #2041498 - incorrect partition size calculation for BLKPG_* ioctls
  - fix #2011602 - logger from util-linux incorrectly handles long messages
  - fix #1916151 - [RFE] spread fstrim.timer across time
  - fix #1894192 - Update or backport setpriv --pdeathsig
  - fix #2026511 - blkid fails to complete when targeting  non-block devices


author: Karel Zak <kzak@redhat.com> 2.32.1-31
changelog:
  - improve #2026511 fix - blkid fails to complete when targeting non-block devices
  - fix #1950187 - Ambient capabilities failed to applied to non-root user


author: Karel Zak <kzak@redhat.com> 2.32.1-36
changelog:
  - fix #2060030 - Please backport patches for atari partition detection to RHEL 8
  - fix #2069187 - Internal testsuite for lscpu failed on aarch64
  - fix #2093166 - lslogins reports incorrect "Password is locked" status
  - fix #2059241 - rpm -V / --verify reports bad user/group/mtime for /run/uuidd
  - fix #2044592 - Move /var/log/lastlog ownership to systemd


author: Vojtech Trefny <vtrefny@redhat.com> - 2.19-12
changelog:
  - Use cryptsetup to check LUKS2 label
    Resolves: rhbz#1778689
  - Fix expected cache pool name with newest LVM
    Related: rhbz#1778689


author: Zoltan Fridrich <zfridric@redhat.com> - 2.26-5
changelog:
  - added CAP_PERFMON, CAP_BPF and CAP_CHECKPOINT_RESTORE capabilities
    resolves: rhbz#1946982 rhbz#1921576


author: Zoltan Fridrich <zfridric@redhat.com> - 2.48-2
changelog:
  - rebase to 2.48
    resolves: rhbz#2032813
  - fix ambient capabilities for non-root users
    resolves: rhbz#1950187


author: Filip Januš <fjanus@redhat.com> 5.3.28-42
changelog:
  - Apply the previous change only on aarch64 to limit the risk of unwanted impact
  - Resolves: #1992402


author: Honggang Li <honli@redhat.com> - 1.11.1-1
changelog:
  - Rebase to upstream release v1.11.1
  - EFA Support requires libfabric
  - Resolves: bz1831145, bz1852636


author: Michal Schmidt <mschmidt@redhat.com> - 1.15.1-1
changelog:
  - Update to upstream release 1.15.1
  - Disable LTO on x86_64 due to memory issues (copied from Fedora)
  - Resolves: rhbz#2040450


author: Alexey Tikhonov <atikhono@redhat.com> - 2.6.2-1
changelog:
  - Resolves: rhbz#2011216 - Rebase SSSD for RHEL 8.6
  - Resolves: rhbz#2013260 - [RHEL8] Add ability to parse child log files
  - Resolves: rhbz#2030386 - sssd-kcm has requirement on krb5 symbol "krb5_unmarshal_credentials" only available in latest RHEL8.5 krb5 libraries
  - Resolves: rhbz#1859315 - sssd does not use kerberos port that is set.
  - Resolves: rhbz#1961182 - Passwordless (GSSAPI) SSH not working due to missing "includedir /var/lib/sss/pubconf/krb5.include.d" directive in /etc/krb5.conf
  - Resolves: rhbz#2008829 - sssd_be segfault due to empty forest root name
  - Resolves: rhbz#2012263 - pam responder does not call initgroups to refresh the user entry
  - Resolves: rhbz#2012308 - Add client certificate validation D-Bus API
  - Resolves: rhbz#2012327 - Groups are missing while performing id lookup as SSSD switching to offline mode due to the wrong domain name in the ldap-pings(netlogon).
  - Resolves: rhbz#2013028 - [RFE] Health and Support Analyzer: Add sssctl sub-command to select and display a single request from the logs
  - Resolves: rhbz#2013259 - [RHEL8] Add tevent chain ID logic into responders
  - Resolves: rhbz#2017301 - [sssd] RHEL 8.6 Tier 0 Localization


author: Alexey Tikhonov <atikhono@redhat.com> - 2.6.2-3
changelog:
  - Resolves: rhbz#2039892 - 2.6.2 regression: Daemon crashes when resolving AD user names
  - Resolves: rhbz#1859315 - sssd does not use kerberos port that is set.
  - Resolves: rhbz#2030386 - sssd-kcm has requirement on krb5 symbol "krb5_unmarshal_credentials" only available in latest RHEL8.5 krb5 libraries
  - Resolves: rhbz#2035245 - AD Domain in the AD Forest Missing after sssd latest update
  - Resolves: rhbz#2017301 - [sssd] RHEL 8.6 Tier 0 Localization


author: Alexey Tikhonov <atikhono@redhat.com> - 2.7.0-2
changelog:
  - Resolves: rhbz#2069379 - Rebase SSSD for RHEL 8.7
  - Resolves: rhbz#2026799 - SSSD authenticating to LDAP with obfuscated password produces Invalid authtoken type message causing sssd_be to go offline (cross inter_ference of different provider plugins options)
  - Resolves: rhbz#2033347 - sssd error triggers backtrace : [write_krb5info_file_from_fo_server] (0x0020): [RID#73501] There is no server that can be written into kdc info file.
  - Resolves: rhbz#2056483 - [RFE] Add sssd internal krb5 plugin for authentication against external IdP via OAuth2
  - Resolves: rhbz#2062689 - [Improvement] Add user and group version of sss_nss_getorigbyname()
  - Resolves: rhbz#2065692 - [RHEL8] Ship new sub-package called sssd-idp into sssd
  - Resolves: rhbz#2072050 - sssd_nss exiting (due to missing 'sssd' local user) making SSSD service to restart in a loop
  - Resolves: rhbz#2072931 - Use right sdap_domain in ad_domain_info_send
  - Resolves: rhbz#2087088 - sssd does not enforce smartcard auth for kde screen locker
  - Resolves: rhbz#2087744 - Unable to lookup AD user if the AD group contains '@' symbol
  - Resolves: rhbz#2087745 - 2FA prompting setting ineffective
  - Resolves: rhbz#2087746 - sssd fails GPO-based access if AD have setup with Japanese language


author: Alexey Tikhonov <atikhono@redhat.com> - 2.7.2-1
changelog:
  - Resolves: rhbz#2069379 - Rebase SSSD for RHEL 8.7
  - Resolves: rhbz#2098620 - sdap_nested_group_deref_direct_process() triggers internal watchdog for large data sets
  - Resolves: rhbz#2098619 - [Improvement] add SSSD support for more than one CRL PEM file name with parameters certificate_verification and crl_file
  - Resolves: rhbz#2088817 - pam_sss_gss ceased to work after upgrade to 8.6
  - Resolves: rhbz#2098616 - Add idp authentication indicator in man page of sssd.conf
  - Resolves: rhbz#2056035 - 'getent hosts' not return hosts if they have more than one CN in LDAP
  - Resolves: rhbz#2098615 - Regression "Missing internal domain data." when setting ad_domain to incorrect
  - Resolves: rhbz#2098617 - Harden kerberos ticket validation
  - Resolves: rhbz#2087744 - Unable to lookup AD user if the AD group contains '@' symbol


author: Alexey Tikhonov <atikhono@redhat.com> - 2.7.3-1
changelog:
  - Resolves: rhbz#2069379 - Rebase SSSD for RHEL 8.7
  - Resolves: rhbz#2063016 - [sssd] RHEL 8.7 Tier 0 Localization


author: Alexey Tikhonov <atikhono@redhat.com> - 2.7.3-2
changelog:
  - Resolves: rhbz#2116488 - virsh command will hang after the host run several auto test cases
  - Resolves: rhbz#2116486 - [regression] sssctl analyze fails to parse PAM related sssd logs
  - Resolves: rhbz#2116487 - cache_req_data_set_hybrid_lookup: cache_req_data should never be NULL


author: Alexey Tikhonov <atikhono@redhat.com> - 2.7.3-3
changelog:
  - Resolves: rhbz#2116395 - NFS krb5 mount failed as "access denied" after test accessing a same file on krb5 nfs mount with multiple uids simultaneously since sssd-2.7.3-1.el8
  - Resolves: rhbz#2119726 - sssctl analyze --logdir option requires sssd to be configured
  - Resolves: rhbz#2120669 - Incorrect request ID tracking from responder to backend


author: Alexey Tikhonov <atikhono@redhat.com> - 2.7.3-4
changelog:
  - Resolves: rhbz#2116395 - NFS krb5 mount failed as "access denied" after test accessing a same file on krb5 nfs mount with multiple uids simultaneously since sssd-2.7.3-1.el8


author: Till Maas <opensource@till.name> - 1.09-2
changelog:
  - Rebuilt for Fedora 23 Change
    https://fedoraproject.org/wiki/Changes/Harden_all_packages_with_position-independent_code


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 3.3.0-4
changelog:
  - Python 2 binary package renamed to python2-libnl3
    See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3


author: Iryna Shcherbina <ishcherb@redhat.com> - 3.4.0-2
changelog:
  - Update Python 2 dependency declarations to new packaging standards
    (See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3)


author: Tomáš Mráz <tmraz@redhat.com> 1.4.4-1
changelog:
  - Translation updates
  - Add usersubstr check for substrings of N characters from the username
    patch by Danny Sauer
  - pam_pwquality: Abort the retry loop if user requests it
  - Allow setting retry, enforce_for_root, and local_users_only options
    in the pwquality.conf config file


author: Dmitry Belyavskiy <dbelyavs@redhat.com> - 1.4.4-3
changelog:
  - Resolves: rhbz#1919026 libpwquaily rpm requires cracklib to function but RPM missing requirement [updated]


author: Caolán McNamara <caolanm@redhat.com> - 1:6.4.7.2-6
changelog:
  - Resolves: rhbz#1980800 allow convert to csv to write each sheet to
    separate file
  - Resolves: rhbz#1992695 two style tags where there should be one


author: Caolán McNamara <caolanm@redhat.com> - 1:6.4.7.2-7
changelog:
  - Resolves: rhbz#2013858 CVE-2021-25633
  - Resolves: rhbz#2014215 CVE-2021-25634
  - Resolves: rhbz#2014209 CVE-2021-25635


author: Caolán McNamara <caolanm@redhat.com> - 1:6.4.7.2-9
changelog:
  - Related: rhbz#2029810 set NoDisplay=true for .desktop on s390x/aarch64
  - Related: rhbz#2029810 don't Require any vclplug for s390x/aarch64


author: Ales Matej <amatej@redhat.com> - 1.11.3-1
changelog:
  - Update to 1.11.3
   - Prefer mirrorlist/metalink over baseurl (RhBug:1775184)
   - Fix calling Python API without holding GIL (RhBug:1788918) 
   - Do not unref LrErr_Exception on exit (RhBug:1778854)


author: Nicola Sella <nsella@redhat.com> - 1.12.0-1
changelog:
  - Update to 1.12.0
  - Decode package URL when using for local filename (RhBug:1817130)
  - Fix memory leak in lr_download_metadata() and lr_yum_download_remote()
  - Download sources work when at least one of specified is working (RhBug:1775184)
  - Enable building on OSX


author: Pavla Kratochvilova <pkratoch@redhat.com> - 1.14.0-1
changelog:
  - Update to 1.14.0
  - Fix the key string parsing in url_substitution
  - When zchunk enabled and not using HTTP/S protocol, download the whole file (RhBug:1886706)
  - Add an option LRO_SSLVERIFYSTATUS to check TLS certificate revocation status (using OCSP stapling) (RhBug:1814383)
  - Fix: lr_perform() - Avoid 100% CPU usage
  - Add support for working with certificates used with proxy
  - Reposync does not re-download unchanged packages (RhBug:1931904)
  - Fix memory leaks


author: Pavla Kratochvilova <pkratoch@redhat.com> - 1.14.2-1
changelog:
  - Update to 1.14.2
  - Reduce time to load metadata
  - Fix resource leaks and memory leaks
  - Remove build dependency on python3-flask


author: Petr Lautrbach <plautrba@redhat.com> - 2.9-2.1
changelog:
  - Use Python distutils to install SELinux python bindings (#1719771)
  - Move  sefcontext_compile to -utils package (#1612518)


author: Vit Mojzis <vmojzis@redhat.com> - 2.9-6
changelog:
  - Describe fcontext regular expressions (#1904059)
  - Strip spaces before values in config (#2012145)


author: Michal Hlavinka <mhlavink@redhat.com> - 1.0.28-10
changelog:
  - fix CVE-2018-19661 and CVE-2018-19662 - buffer over-read in the function
    i2alaw_array in alaw (#1673085)


author: Michal Hlavinka <mhlavink@redhat.com> - 1.0.28-11
changelog:
  - a crafted wav file could cause heap buffer overflow that allowed an arbitrary code execution(#1985028)


author: Ales Matej <amatej@redhat.org> - 0.7.7-1
changelog:
  - Update to 0.7.7
  - selected bug fixes:
    * fix updating of too many packages in focusbest mode
    * fix handling of disabled installed packages in distupgrade
    * fix repository priority handling for multiversion packages
    * better support of inverval deps in pool_match_dep()
    * support src rpms that have non-empty provides
    * fix favorq leaking between solver runs if the solver is reused
    * fix SOLVER_FLAG_FOCUS_BEST updateing packages without reason
    * be more correct with multiversion packages that obsolete their
      own name
    * allow building with swig-4.0.0
    * lock jobs now take precedence over dup and forcebest jobs
  - new features
    * new POOL_FLAG_WHATPROVIDESWITHDISABLED pool flag 
    * bindings: add get_disabled_list() and set_disabled_list()
    * bindings: add whatcontainsdep()
    * bindings: make the selection filters return the self object
    * MSVC compilation support


author: Ales Matej <amatej@redhat.org> - 0.7.11-1
changelog:
  - Update to 0.7.11
  - selected bug fixes:
    * support arch<->noarch package changes when creating patch
      conflicts from the updateinfo data
    * also support other rpm database types
    * fixed solv_zchunk decoding error if large chunks are used
    * treat retracted pathes as irrelevant
    * made add_update_target work with multiversion installs
  - new features
    * support for SOLVER_BLACKLIST jobs that block the installation of matched
      packages unless they are directly selected by an SOLVER_INSTALL job
    * libsolv now also parses the patch status in the updateinfo parser
    * new solvable_matchessolvable() function
    * support conda constrains dependencies
    * new rpm_stat_database() function
    * new rpm_hash_database_state() function


author: Nicola Sella <nsella@redhat.com> - 0.7.16-1
changelog:
  - Update to 0.7.16
  - selected bug fixes:
    * make testcase_mangle_repo_names deal correctly with freed repos
    [bnc#1177238]
    * fix add_complex_recommends() selecting conflicted packages in
      rare cases leading to crashes
    * improve choicerule generation so that package updates are
      prefered in more cases
    * fix deduceq2addedmap clearing bits outside of the map
    * conda: feature depriorization and fix startswith implementation
    * Fix solvable swapping messing up idarrays
    * fix ruleinfo of complex dependencies returning the wrong origin
    * fix solv_zchunk decoding error if large chunks are used
      [bnc#1159314]
  - new features
    * new testcase_mangle_repo_names() function
    * new solv_fmemopen() function
    * Enable zstd compression support for sle15 and sle15-sp2
    * Support blacklisted packages in solver_findproblemrule()
      [bnc#1172135]
    * Support rules with multiple negative literals in choice rule
      generation
    * build with -DENABLE_RPMDB_LIBRPM=1 on SUSE to support
      multiple rpm database backends
    * added two new function to make libzypp independent of the rpm
      database format
    * support conda constrains dependencies


author: Pavla Kratochvilova <pkratoch@redhat.org> - 0.7.17-1
changelog:
  - Update to 0.7.17
  - selected bug fixes:
    * repo_write: fix handling of nested flexarray
    * improve choicerule generation a bit more to cover more cases
    * harden testcase parser against repos being added too late
    * support python-3.10
    * check /var/lib/rpm macro in rpmdb code
  - new features:
    * handle default/visible/langonly attributes in comps parser
    * support multiple collections in updateinfo parser
    * add '-D' option in rpmdb2solv to set the dbpath


author: Pavla Kratochvilova <pkratoch@redhat.org> - 0.7.19-1
changelog:
  - Update to 0.7.19
  - repo_add_conda: add flag to skip v2 packages
  - fix rare segfault in resolve_jobrules() that could happen if new rules are learnt
  - fix error handling in solv_xfopen_fd()
  - fix memory leaks


author: Pavla Kratochvilova <pkratoch@redhat.com> - 0.7.20-1
changelog:
  - Update to 0.7.20
  - new SOLVER_EXCLUDEFROMWEAK job to ignore pkgs for weak dependencies
  - support for environments in comps parser
  - fix misparsing of '&' in attributes with libxml2
  - choice rules: treat orphaned packages as newest
  - fix compatibility with Python 3.10


author: Jakub Hrozek <jhrozek@redhat.com> - 2.1.16-1
changelog:
  - Resolves: rhbz#1684577 - Rebase libtalloc to version 2.1.16 for Samba
  - Resolves: rhbz#1597315 - libtalloc uses Python 2 to build
  - Resolves: rhbz#1567136 - libtalloc: Drop Python 2 subpackage from RHEL 8


author: Jakub Hrozek <jhrozek@redhat.com> - 2.1.16-2
changelog:
  - Remove python2 libraries on upgrade
  - Resolves: rhbz#1567136 - libtalloc: Drop Python 2 subpackage from RHEL 8


author: Jakub Hrozek <jhrozek@redhat.com> - 2.1.16-3
changelog:
  - Also obsolete python2-libtalloc-debuginfo
  - Resolves: rhbz#1567136 - libtalloc: Drop Python 2 subpackage from RHEL 8


author: Jakub Hrozek <jhrozek@redhat.com> - 1.3.16-1
changelog:
  - New upstream release 1.3.16
  - Use RHEL_ALLOW_PYTHON2_FOR_BUILD=1 until libtalloc uses waf3
  - Patch the waf script to explicitly call python2 as "env python" doesn't
    yield py2 anymore


author: Jakub Hrozek <jhrozek@redhat.com> - 1.3.18.1
changelog:
  - Resolves: rhbz#1684579 - Rebase libtdb to version 1.3.18 for Samba
  - Resolves: rhbz#1597319 - libtdb uses Python 2 to build
  - Resolves: rhbz#1567138 - libtdb: Drop Python 2 subpackage from RHEL 8


author: Jakub Hrozek <jhrozek@redhat.com> - 1.3.18.2
changelog:
  - Obsolete the python2 packages on upgrade
  - Resolves: rhbz#1567138 - libtdb: Drop Python 2 subpackage from RHEL 8


author: Isaac Boukris <iboukris@redhat.com> - 1.4.2-2
changelog:
  - Resolves: rhbz#1754420 - Rebase libtdb 1.4.2 for samba
  - Related: rhbz#1754420 - Fix sssd tests (tdb)


author: Jakub Hrozek <jhrozek@redhat.com> - 0.9.37-1
changelog:
  - New upstream release 0.9.37
  - Use RHEL_ALLOW_PYTHON2_FOR_BUILD=1 for build
  - Use %{__python2}, not "python", as the Python2 interpreter


author: Jakub Hrozek <jhrozek@redhat.com> - 0.9.39-1
changelog:
  - Resolves: #1684580 - Rebase libtevent to version 0.9.36 for Samba
  - Resolves: #1597318 - libtevent uses Python 2 to build
  - Resolves: #1567139 - libtevent: Drop Python 2 subpackage from RHEL 8


author: Jakub Hrozek <jhrozek@redhat.com>
changelog:
  - Remove the python2 subpackages on upgrade
  - Resolves: #1567139 - libtevent: Drop Python 2 subpackage from RHEL 8


author: Isaac Boukris <iboukris@redhat.com> - 0.10.0-2
changelog:
  - Resolves: #1754421 - Upgrade tevent to 0.10.0 version for samba
  - Related: #1754421 - Fix sssd tests (tevent)


author: Nikola Forró <nforro@redhat.com> - 4.0.9-19
changelog:
  - Fix CVE-2020-35521 (#1945539)
  - Fix CVE-2020-35522 (#1945555)
  - Fix CVE-2020-35523 (#1945542)
  - Fix CVE-2020-35524 (#1945546)


author: Matej Mužila <mmuzila@redhat.com> - 4.0.9-23
changelog:
  - Fix various CVEs
  - Resolves: CVE-2022-0561 CVE-2022-0562 CVE-2022-22844 CVE-2022-0865
    CVE-2022-0891 CVE-2022-0924 CVE-2022-0909 CVE-2022-0908 CVE-2022-1355


author: Steve Dickson <steved@redhat.com> 1.1.4-4
changelog:
  - Enable gating using reverse dependency testing of nfs-utils (bz 1681965)
  - Updated the URL (bz 1638671)
  - Fix EOF detection on non-blocking socket (bz 1641875)


author: Steve Dickson <steved@redhat.com> 1.1.4-5
changelog:
  - blacklist: Add a few more well known ports (bz 1854147)
  - Disallow calling auth_refresh from clnt_call with RPCSEC_GSS (bz 1934866)


author: Steve Dickson <steved@redhat.com> 1.1.4-8
changelog:
  - rpcb_clnt.c add mechanism to try v2 protocol first (bz 2107650)
  - Multithreaded cleanup (bz 2112116)


author: David King <dking@redhat.com> - 2.9.7-10
changelog:
  - Fix CVE-2021-3516 (#1956976)
  - Fix CVE-2021-3517 (#1957001)
  - Fix CVE-2021-3518 (#1957028)
  - Fix CVE-2021-3537 (#1957284)


author: Miroslav Lichvar <mlichvar@redhat.com> 2.0-3
changelog:
  - add support for active-backup team interface (#1685467)
  - add support for more accurate synchronization to phc2sys (#1677217)
  - add hwts_filter option to ptp4l (#1708554)
  - limit unicast message rate per address and grant duration (#1707395)
  - fix comparing of unicast addresses (#1707395)
  - fix building with new kernel headers (#1707395)
  - update testsuite (#1707395)
  - don't leak memory when allocation fails (#1707395)


author: Miroslav Lichvar <mlichvar@redhat.com> 2.0-5
changelog:
  - fix sample timestamps when synchronizing PHC to system clock (#1787376)
  - fix handling of zero-length messages (#1827275)


author: Miroslav Lichvar <mlichvar@redhat.com> 3.1.1-1
changelog:
  - update to 3.1.1 (#1895005 CVE-2021-3571)
  - add read-only UDS port (#1929797)
  - add option to set clockClass threshold (#1980386)
  - don't repeat some log messages in multi-port configuration (#1980377)
  - increase default TX timestamp timeout to 10 ms (#1977136)


author: Aaron Conole <aconole@redhat.com> - 1.0.1-14.git036e314
changelog:
  - Update to branch-1.1 compatibility
  - Fixes to avoid assert in the agent state machine
  - Remove the memory constraint on the event socket buffer (#1554110)


author: Prarit Bhargava <prarit@redhat.com> - 3:160-1
changelog:
  - Deduce channel number for Haswell/Broadwell/Skylake systems [1641046]
  - Add decoding for Optane DC persistent memory mode [1645344]


author: Prarit Bhargava <prarit@redhat.com> - 3:173-0
changelog:
  - Update to v173
  - adds support for Tigerlake, Rocketlake, Alderlake, Lakefield
  - adds support for CometLake, Icelake server, Icelake-D, and Snow Ridge


author: Francisco Trivino <ftrivino@redhat.com> 1.6.1-9
changelog:
  - Add missing repos to the osci tests
  - Fix gss localname test to work with older gssapi version
  - Resolves: #2083122
  - Add ability to expose the used mechanism
  - Resolves: #2046231


author: <jdennis@redhat.com> - 2.3.7-3
changelog:
  - Resolves: rhbz# 1614977 - fix unit test segfault,
    the problem was not limited exclusively to s390x, but s390x provoked it.


author: Jakub Hrozek <jhrozek@redhat.com> - 2.3.7-5
changelog:
  - Resolves: rhbz#1805749 - CVE-2019-14857 mod_auth_openidc:2.3/mod_auth_openidc:
                             Open redirect in logout url when using URLs with
                             leading slashes
  - Resolves: rhbz#1805068 - CVE-2019-20479 mod_auth_openidc:2.3/mod_auth_openidc:
                             open redirect issue exists in URLs with slash and
                             backslash


author: Jakub Hrozek <jhrozek@redhat.com> - 2.3.7-6
changelog:
  - Fix the previous backport
  - Related: rhbz#1805749 - CVE-2019-14857 mod_auth_openidc:2.3/mod_auth_openidc:
                            Open redirect in logout url when using URLs with
                            leading slashes
  - Related: rhbz#1805068 - CVE-2019-20479 mod_auth_openidc:2.3/mod_auth_openidc:
                            open redirect issue exists in URLs with slash and
                            backslash


author: Jakub Hrozek <jhrozek@redhat.com> - 2.3.7-7
changelog:
  - Resolves: rhbz#1897992 - OIDCStateInputHeaders &
                             OIDCStateMaxNumberOfCookies in existing
                             mod_auth_openidc version
  - Backport the OIDCStateMaxNumberOfCookies option
  - Configure which header value is used to calculate the fingerprint of
    the auth state


author: Jakub Hrozek <jhrozek@redhat.com> - 2.3.7-8
changelog:
  - Resolves: rhbz#1823756 - Backport SameSite=None cookie from
                             mod_auth_openidc upstream to support latest browsers


author: Tomas Halman <thalman@redhat.com> - 2.3.7-9
changelog:
  - Resolves: rhbz#2001853 - CVE-2021-39191 open redirect by supplying a crafted URL
                             in the target_link_uri parameter


author: Tomas Halman <thalman@redhat.com> - 2.3.7-10
changelog:
  - Resolves: rhbz#1987216 - CVE-2021-32791 hardcoded static IV and AAD with a
                             reused key in AES GCM encryption [rhel-8] (edit)


author: Javier Martinez Canillas <javierm@redhat.com> - 0.3.0-10
changelog:
  - Add mokutil code to consume data from /sys/firmware/efi/mok-variables/
    as well as attempting to consume numbered mok variables from efivarfs
    when mok-variables aren't present (pjones)
    Resolves: rhbz#1907418


author: Honggang Li <honli@redhat.com> - 5.6.2-1
changelog:
  - Update OSU benchmarks to upstream release 5.6.2
  - Update IMB benchmarks to upstream release v2019.6
  - Resolves: rhbz#1817837


author: Honggang Li <honli@redhat.com> - 5.7-2
changelog:
  - Update OSU benchmarks to upstream release 5.7.1
  - Update Intel MPI Benchmarks 2021.2
  - Resolves: rhbz#1960078


author: Honggang Li <honli@redhat.com> - 5.8-1
changelog:
  - Update OSU benchmarks to upstream release 5.8
  - Update Intel MPI Benchmarks 2021.3
  - Resolves: rhbz#2008517


author: Phil Sutter <psutter@redhat.com> [0.9.3-17.el8]
changelog:
  - json: don't leave dangling pointers on hlist (Phil Sutter) [1900565]
  - json: Fix seqnum_to_json() functionality (Phil Sutter) [1900565]
  - json: echo: Speedup seqnum_to_json() (Phil Sutter) [1900565]
  - proto: Fix ARP header field ordering (Phil Sutter) [1896334]
  - proto: add sctp crc32 checksum fixup (Phil Sutter) [1895804]
  - mergesort: unbreak listing with binops (Phil Sutter) [1891790]
  - evaluate: missing datatype definition in implicit_set_declaration() (Phil Sutter) [1877022]
  - evaluate: Perform set evaluation on implicitly declared (anonymous) sets (Phil Sutter) [1877022]
  - src: store expr, not dtype to track data in sets (Phil Sutter) [1877022]


author: Phil Sutter <psutter@redhat.com> [0.9.3-19.el8]
changelog:
  - evaluate: Reject quoted strings containing only wildcard (Phil Sutter) [1818117]
  - tests: monitor: use correct $nft value in EXIT trap (Phil Sutter) [1919203]
  - monitor: Fix for use after free when printing map elements (Phil Sutter) [1919203]
  - tests: Disable tests known to fail on RHEL8 (Phil Sutter) [1919203]


author: Phil Sutter <psutter@redhat.com> [0.9.3-20.el8]
changelog:
  - src: Optimize prefix matches on byte-boundaries (Phil Sutter) [1934926]
  - src: Support odd-sized payload matches (Phil Sutter) [1934926]
  - spec: Add an rpminspect.yaml file to steer rpminspect (Phil Sutter) [1962184]
  - spec: Explicitly state dist string in Release tag (Phil Sutter) [1962184]


author: Phil Sutter <psutter@redhat.com> [0.9.3-21.el8]
changelog:
  - tests: shell: Fix bogus testsuite failure with 100Hz (Phil Sutter) [1919203]
  - doc: nft.8: Extend monitor description by trace (Phil Sutter) [1820365]
  - include: missing sctp_chunk.h in Makefile.am (Phil Sutter) [1979334]
  - exthdr: Implement SCTP Chunk matching (Phil Sutter) [1979334]
  - scanner: sctp: Move to own scope (Phil Sutter) [1979334]
  - scanner: introduce start condition stack (Phil Sutter) [1979334]
  - json: Simplify non-tcpopt exthdr printing a bit (Phil Sutter) [1979334]
  - json: tcp: add raw tcp option match support (Phil Sutter) [1979334]
  - tcp: add raw tcp option match support (Phil Sutter) [1979334]
  - tcpopt: allow to check for presence of any tcp option (Phil Sutter) [1979334]
  - tcpopt: split tcpopt_hdr_fields into per-option enum (Phil Sutter) [1979334]
  - tcpopt: rename noop to nop (Phil Sutter) [1979334]
  - tcpopts: clean up parser -> tcpopt.c plumbing (Phil Sutter) [1979334]
  - parser: merge sack-perm/sack-permitted and maxseg/mss (Phil Sutter) [1979334]
  - tests/py: Move tcpopt.t to any/ directory (Phil Sutter) [1979334]


author: Phil Sutter <psutter@redhat.com> [0.9.3-22.el8]
changelog:
  - json: Drop pointless assignment in exthdr_expr_json() (Phil Sutter) [1999059]
  - parser_json: Fix for memleak in tcp option error path (Phil Sutter) [1999059]
  - parser_bison: Fix for implicit declaration of isalnum (Phil Sutter) [1999059]
  - parser_json: Fix error reporting for invalid syntax (Phil Sutter) [1994141]


author: Phil Sutter <psutter@redhat.com> [0.9.3-23.el8]
changelog:
  - tests: cover baecd1cf2685 ("segtree: Fix segfault when restoring a huge interval set") (Phil Sutter) [1908127]
  - segtree: Fix segfault when restoring a huge interval set (Phil Sutter) [1908127]


author: Phil Sutter <psutter@redhat.com> [0.9.3-24.el8]
changelog:
  - tests: shell: better parameters for the interval stack overflow test (Phil Sutter) [1908127]
  - tests: shell: $NFT needs to be invoked unquoted (Phil Sutter) [1908127]


author: Phil Sutter <psutter@redhat.com> [0.9.3-25.el8]
changelog:
  - mnl: do not build nftnl_set element list (Phil Sutter) [2047821]
  - tests: py: add dnat to port without defining destination address (Phil Sutter) [2030773]
  - evaluate: fix inet nat with no layer 3 info (Phil Sutter) [2030773]
  - evaluate: attempt to set_eval flag if dynamic updates requested (Phil Sutter) [2039594]
  - src: support for restoring element counters (Phil Sutter) [2039594]
  - netlink: remove unused parameter from netlink_gen_stmt_stateful() (Phil Sutter) [2039594]


author: Phil Sutter <psutter@redhat.com> [0.9.3-26.el8]
changelog:
  - libnftables: call nft_cmd_expand() only with CMD_ADD (Phil Sutter) [2073287]
  - src: add CMD_OBJ_SETELEMS (Phil Sutter) [2073287]
  - src: rename CMD_OBJ_SETELEM to CMD_OBJ_ELEMENTS (Phil Sutter) [2073287]
  - rule: fix element cache update in __do_add_setelems() (Phil Sutter) [2073287]
  - rule: memleak in __do_add_setelems() (Phil Sutter) [2073287]
  - tests: shell: auto-removal of chain hook on netns removal (Phil Sutter) [2070924]
  - mnl: do not use expr->identifier to fetch device name (Phil Sutter) [2070924]


author: Zuzana Svetlikova <zsvetlik@redhat.com> - 1:16.8.0-1
changelog:
  - Resolves CVE-2021-32803, CVE-2021-32804, CVE-2021-37701, CVE-2021-37712
  - Resolves: RHBZ#1993948, RHBZ#1993941, RHBZ#2000151, RHBZ#2002176


author: Zuzana Svetlikova <zsvetlik@redhat.com> - 1:16.13.1-1
changelog:
  - Resolves: RHBZ#2014132, RHBZ#2014126, RHBZ#2013828, RHBZ#2024920
  - Resolves: RHBZ#2026329
  - Rebase to LTS release and to fix multiple low and medium CVEs


author: Jan Staněk <jstanek@redhat.com> - 1:16.14.0-5
changelog:
  - Unify configure calls into single command
  - Refactor bootstrap-related parts
  - Decouple dependency bundling from bootstrapping


author: Jan Staněk <jstanek@redhat.com> - 1:18.6.0-1
changelog:
  - Rebase to version 18.6.0
    Resolves: CVE-2022-32212 CVE-2022-32213 CVE-2022-32214 CVE-2022-32215
    Resolves: CVE-2022-29244


author: Nalin Dahyabhai <nalin@redhat.com> - 0.34.4-7
changelog:
  - Drop Python 2 build-time dependency, which hasn't been used since we turned
    off building the python bindings years ago (#1595853, #1642502).


author: Alexander Bokovoy <abokovoy@redhat.com> - 0.34.5-1
changelog:
  - Upstream release 0.34.5
  - Resolves: rhbz#1833289 - Rebase oddjob to 0.34.5
  - Resolves: rhbz#1833052 - CVE-2020-10737 
    oddjob: race condition in oddjob_selinux_mkdir function in mkhomedir.c can lead to symlink attack


author: Alexander Bokovoy <abokovoy@redhat.com> - 0.34.7-1
changelog:
  - Upstream release 0.34.7
  - Force LC_ALL=C.UTF-8 in oddjobd systemd service environment
  - Resolves: rhbz#1907481 - oddjob locale issue
  - Resolves: rhbz#1907541 - rebase oddjob to 0.34.7


author: Nikola Forró <nforro@redhat.com> - 0.3.15-1
changelog:
  - Rebase to version 0.3.15
  - Use gcc-toolset-11 to benefit from POWER 10 optimizations
    resolves: #1983218


author: Nikola Forró <nforro@redhat.com> - 0.3.15-3
changelog:
  - Fix missing header files in openblas-devel subpackage by enabling
    gcc-toolset-11 in %install as well
    related: #1983218


author: Than Ngo <than@redhat.com> - 3.16.0-5
changelog:
  - Resolves: #1987256, pkcstok_migrate leaves options with multiple strings in opencryptoki.conf options without double-quotes


author: Than Ngo <than@redhat.com> - 3.18.0-1
changelog:
  - Resolves: #2043845, rebase to 3.18.0
  - Resolves: #2043854, add crypto counters
  - Resolves: #2043855, support crypto profiles


author: Than Ngo <than@redhat.com> - 3.18.0-3
changelog:
  - Related: #2043854, do not touch opencryptoki.conf if it is in place already and even if it is unchanged
  - Resolves: #2112785, EP11: Fix C_GetMechanismList returning CKR_BUFFER_TOO_SMALL


author: Jiri Kucera <jkucera@redhat.com> - 3.4.6-2
changelog:
  - fix cmakes location
  - remove -DENABLE_PKG_CONFIG=OFF (it was neither defined nor used)
  - remove confusing comment
  - WITH_GDAL=OFF (gdal dependency has been already removed)
    Related: #1694647


author: Jiri Kucera <jkucera@redhat.com> - 3.4.6-5
changelog:
  - Move libopencv_{calib3d,cvv,hfs}.so.* to their proper packages
  - Fix issues found by rpmdiff
    Related: #1694647


author: Jan Černý <jcerny@redhat.com> - 1.3.5-8
changelog:
  - Allow local DS components (rhbz#1970529)
  - Fix hostname detection in offline scan of UBI 9 images (rhbz#1893888)
  - Add an alternative source of hostname (rhbz#1977668)
  - Fix oscap-chroot errors in process58_probe caused by empty /proc (rhbz#2008922)


author: Jan Černý <jcerny@redhat.com> - 1.3.5-9
changelog:
  - Lower memory limits and improve their checking (rhbz#2021851)
  - Remove timestamp from the user manual (rhbz#2022364)


author: Jan Černý <jcerny@redhat.com> - 1.3.6-1
changelog:
  - Upgrade to the latest upstream release (rhbz#2041781)
  - Select and exclude groups of rules on the command line
  - The boot-time remediation service for systemd's Offline Update mode


author: Jan Černý <jcerny@redhat.com> - 1.3.6-4
changelog:
  - Fix potential invalid scan results in OpenSCAP (rhbz#2111040)
  - Remove oscap-remediate service (rhbz#2111360)


author: Vitezslav Crhonek <vcrhonek@redhat.com> - 2.0.0-15
changelog:
  - Removed dependency on net-tools
    Resolves: #1496138
  - Removed init script, Group tag and macro from changelog in spec file
  - Slightly modified openssl-1.1 fix to be able build the package
    with OpenSSL version lower than 1.1


author: Dmitry Belyavskiy <dbelyavs@redhat.com> - 8.0p1-7 + 0.10.3-7
changelog:
  - SFTP sort upon the modification time (#1909988)
  - ssh-keygen printing fingerprint issue with Windows keys (#1901518)
  - PIN is lost when iterating over tokens when adding pkcs11 keys to ssh-agent (#1843372)
  - ssh-agent segfaults during ssh-add -s pkcs11 (#1868996)
  - ssh-copy-id could not resolve ipv6 address ends with colon (#1933517)
  - sshd provides PAM an incorrect error code (#1879503)


author: Dmitry Belyavskiy <dbelyavs@redhat.com> - 8.0p1-9
changelog:
  - CVE-2020-14145 openssh: Observable Discrepancy leading to an information
    leak in the algorithm negotiation (#1882252)
  - Hostbased ssh authentication fails if session ID contains a '/' (#1944125)


author: Zoltan Fridrich <zfridric@redhat.com> - 8.0p1-14
changelog:
  - Upstream: add a local implementation of BSD realpath() for sftp-server (#2064249)
  - Change product name from Fedora to RHEL in openssh-7.8p1-UsePAM-warning.patch (#1953807)
  - Include caveat for crypto-policy in sshd manpage (#2044354)
  - Change log level of FIPS specific log message to verbose (#2050511)
  - Clarify force_file_perms (-m) documentation in sftp-server manpage (#1862504)
  - Minimize the use of SHA1 as a proof of possession for RSA key (#2093897)


author: Vitezslav Crhonek <vcrhonek@redhat.com> - 2.6.5-1
changelog:
  - Update to openwsman-2.6.5
  - Simplify python binding build and drop python2 subpackage
  - Fix malformed HTTP 200 status line


author: Vitezslav Crhonek <vcrhonek@redhat.com> - 2.6.5-3
changelog:
  - Fix wrong SSL_CTX_set_cipher_list() retval check
  - Explicitly disable build of java bindings (build fails if java-devel is installed)


author: Ken Gaillot <kgaillot@redhat.com> - 2.1.2-2
changelog:
  - Correctly get metadata for systemd agent names that end in '@'
  - Use correct OCF 1.1 syntax in ocf:pacemaker:Stateful meta-data
  - Fix regression in displayed times in crm_mon's fence history
  - Resolves: rhbz2003151
  - Resolves: rhbz2027370
  - Resolves: rhbz2032027


author: Ken Gaillot <kgaillot@redhat.com> - 2.1.2-3
changelog:
  - Improve display of failed actions
  - Handle certain probe failures as stopped instead of failed
  - Update pcmk_delay_base description in option meta-data
  - Avoid crash when using clone notifications
  - Retry Corosync shutdown tracking if first attempt fails
  - Resolves: rhbz1470834
  - Resolves: rhbz1506372
  - Resolves: rhbz2027370
  - Resolves: rhbz2039675
  - Resolves: rhbz2042550


author: Ken Gaillot <kgaillot@redhat.com> - 2.1.3-1
changelog:
  - crm_resource --restart fails to restart clone instances except instance 0
  - Add new multiple-active option for "stop unexpected instances"
  - Unable to show metadata for "service" agents with "@" and "." in the name
  - Resource ocf:pacemaker:attribute does not comply with the OCF 1.1 standard
  - Allow resource meta-attribute to exempt resource from node health restrictions
  - Show node health states in crm_mon
  - Rebase pacemaker on upstream 2.1.3-rc2 release
  - crm_mon API result does not validate against schema if fence event has exit-reason
  - Resolves: rhbz1930578
  - Resolves: rhbz2036815
  - Resolves: rhbz2045096
  - Resolves: rhbz2049722
  - Resolves: rhbz2059638
  - Resolves: rhbz2065812
  - Resolves: rhbz2072107
  - Resolves: rhbz2086230


author: Ken Gaillot <kgaillot@redhat.com> - 2.1.3-2
changelog:
  - crm_attribute works on remote node command line when hostname differs
  - Rebase pacemaker on upstream 2.1.3 final release
  - Resolves: rhbz1384172
  - Resolves: rhbz2072107


author: Ken Gaillot <kgaillot@redhat.com> - 2.1.4-1
changelog:
  - Fencer should not ignore CIB updates when stonith is disabled
  - Rebase pacemaker on upstream 2.1.4 final release
  - Fix typo in ocf:pacemaker:HealthSMART meta-data
  - Resolves: rhbz2055935
  - Resolves: rhbz2072107
  - Resolves: rhbz2094855


author: Ken Gaillot <kgaillot@redhat.com> - 2.1.4-4
changelog:
  - Ensure all nodes are re-unfenced after device configuration change
  - crm_resource --why now checks node health status
  - Resolves: rhbz1872483
  - Resolves: rhbz2065818


author: Iker Pedrosa <ipedrosa@redhat.com> 1.3.1-13
changelog:
  - pam_wheel: if getlogin fails fallback to PAM_RUSER: fixed malformed patch (#1866866)
  - pam_namespace: polyinstantiation refer to gdm doc (#1861841)


author: Iker Pedrosa <ipedrosa@redhat.com> - 1.3.1-17
changelog:
  - pam_keyinit: thread-safe implementation. Resolves: #1997969
  - pam_motd: support multiple motd paths specified, with filename overrides. Resolves: #2014458


author: Iker Pedrosa <ipedrosa@redhat.com> - 1.3.1-19
changelog:
  - Add the motd.d directories (empty) to silence warnings and to
    provide proper ownership for them. Resolves: #2014458


author: Nathan Scott <nathans@redhat.com> - 5.3.5-1
changelog:
  - Extend pmlogger(1) man page --interval option (BZ 2018083)
  - Disable Avahi service advertisement by default (BZ 1899625)
  - Use separate localhost and farm service cgroups (BZ 1991896)
  - Update and extend the Nvidia GPU metric coverage (BZ 1690590)
  - Assessment API and pmdamssql(1) share credentials (BZ 1951342)
  - Improve remote pmlogger over slow network connections (BZ 1973833)
  - Implement pcp-atop(1) support for Nvidia GPU reports (BZ 1984273)
  - Drop DMA[32] zones when the zone is not in node 0 (BZ 1985519)
  - Support kernel changes to /proc/zoneinfo metrics (BZ 1985523)
  - Ensure pmlogconf persists configuration changes (BZ 2017632)
  - Auto-reconnect lost redis connection in pmproxy (BZ 1989287)
  - Rebase to a more recent upstream version of PCP (BZ 1991763)


author: Nathan Scott <nathans@redhat.com> - 5.3.5-3
changelog:
  - Resolve failure in the Nvidia metrics agent (BZ 2029301)
  - PMDA indom cache loading performance improvements (BZ 2030121)
  - Consistent user experience for new farm services (BZ 2027753)
  - Resilience improvements for the pmproxy service (BZ 2030140)


author: Nathan Scott <nathans@redhat.com> - 5.3.5-4
changelog:
  - pmdabcc: resolve compilation issues of some bcc PMDA modules on
    aarch64, ppc64le and s390x (BZ 2003956)
  - Further improve pmlogger service startup latency (BZ 1973833)
  - Additional improvements to farm systemd services (BZ 2027753)


author: Nathan Scott <nathans@redhat.com> - 5.3.5-8
changelog:
  - Fix pcp-zeroconf logger interval override regression (BZ 1991763)
  - Remove warnings from spec setup of PCP systemd units (BZ 2048024)


author: Nathan Scott <nathans@redhat.com> - 5.3.7-1
changelog:
  - Fix several issues in the pcp-ss(1) utility (BZ 1981886)
  - Document pmproxy archive discovery further (BZ 2026726)
  - Improve SQL Server PMDA secure settings (BZ 2057615)
  - Rebase to latest stable version of PCP (BZ 2059461)


author: Nathan Scott <nathans@redhat.com> - 5.3.7-3
changelog:
  - Fix remaining issues in the pcp-ss(1) utility (BZ 1981886)
  - Remove benign warning message from pmie systemd unit file.


author: Nathan Scott <nathans@redhat.com> - 5.3.7-5
changelog:
  - Harden pmdapostfix(1) against missing Postfix (BZ 2059463)
  - Fix cgroups failure on non-x86_64 platforms (BZ 2081262)


author: Remi Collet <rcollet@redhat.com> - 7.4.6-1
changelog:
  - update to 7.4.6
  - add ffi extension
  - add /usr/share/php/preload as default ffi.preload configuration
  - run FPM tests
  - set opcache.enable_cli in provided default configuration
  - ensure all shared extensions can be loaded
  - drop wddx, recode and extensions
  - run test suite using 4 concurrent workers


author: Ray Strode <rstrode@redhat.com> - 0.9.4-11.git1688935
changelog:
  - Fix typo in --with-runtimedir argument to actually stop using
    /var/run and instead use /run instead
    Resolves: #2056473


author: Vit Mojzis <vmojzis@redhat.com> - 2.9-19
changelog:
  - semodule: move module hashing into libsemanage (requires libsemanage-2.9-7)
  - semodule: add command-line option to detect module changes (#2049189)


author: Vit Mojzis <vmojzis@redhat.com> - 2.9-20
changelog:
  - python: Split "semanage import" into two transactions (#2063353)
  - semodule: rename --rebuild-if-modules-changed to --refresh (#2089802)
  - selinux-autorelabel: Do not force reboot (#2093133)


author: Marek Kasik <mkasik@redhat.com> - 0.66.0-25
changelog:
  - Check whether input is RGB in PSOutputDev::checkPageSlice()
  - also when using "-optimizecolorspace" flag
  - Resolves: #1697576


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2:3.3.1-10
changelog:
  - Release bump and rebuild for relengs to be able to ship postfix-pcre,
    postfix-cdb, postfix-sqlite
    Resolves: rhbz#1745321


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2:3.5.8-2
changelog:
  - Fixed cleanup crash when processing messages with whitespace only fullname
    Resolves: rhbz#1977732


author: Jan Rybar <jrybar@redhat.com> - 3.3.15-3
changelog:
  - pgrep: uid/gid conversion overflow
  - vmstat: align manpage with procfs wording
  - watch: manpage presumes NTP on system
  - Resolves: rhbz#1827731
  - Resolves: rhbz#1829920
  - Resolves: rhbz#1583669


author: Jan Rybar <jrybar@redhat.com> - 3.3.15-4
changelog:
  - pidof: new option to show kernel worker threads
  - pidof: empty input causes to show kernel worker threads
  - Resolves: rhbz#1860486
  - Resolves: rhbz#1894526
  - Related: rhbz#1803640
  -


author: Jan Rybar <jrybar@redhat.com> - 3.3.15-5
changelog:
  - version bump due to unspotted malformed backport patch
  - Resolves: rhbz#1860486
  - Resolves: rhbz#1894526
  - Related: rhbz#1803640


author: Jan Rybar <jrybar@redhat.com> - 3.3.15-8
changelog:
  - vmstat: added -y option to omit first report
  - Resolves: rhbz#2027350
  - sysctl: backport config directory order, align with systemd
  - Resolves: rhbz#2111915


author: Wim Taymans <wtaymans@redhat.com> - 11.1-23
changelog:
  - Add xauthority parameter to X11 modules
  - Fix compilation against newer alsa-lib
  - Resolves: rhbz#1723065


author: Wim Taymans <wtaymans@redhat.com> - 14.0-1
changelog:
  - Update to 14.0
  - Add pulseaudio-daemon' Provides + Conflicts to support
    swapping with PipeWire
  - Resolves: rhbz#1906322


author: Miro Hrončok <mhroncok@redhat.com> - 0.13-1
changelog:
  - Updated to 0.13
  - Added python3 and python2 subpackages
  - Add --with tests
  - Modernize spec
  - Remove merged patch
  - Update upstream URL


author: Lumír Balhar <lbalhar@redhat.com> - 0.14-3
changelog:
  - Backport patch from upstream/rhel7 which allows pifconfig to show
    multiple IPv4 addresses for each interface
  - Move patches to dist-git
  - Resolves: rhbz#1652174


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 1.0.1-5
changelog:
  - Python 2 binary package renamed to python2-nss
    See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3


author: <jdennis@redhat.com> - 1.0.1-10
changelog:
  - Move documentation generator from epydoc to Sphinx autodoc
  - Modify py2/py3 build logic to comply with new guidelines


author: Charalampos Stratakis <cstratak@redhat.com> - 2.7.18-6
changelog:
  - Security fix for CVE-2020-27619: eval() call on content received via HTTP in the CJK codec tests
  Resolves: rhbz#1889886


author: Charalampos Stratakis <cstratak@redhat.com> - 2.7.18-9
changelog:
  - Security fix for CVE-2021-4189: ftplib should not use the host from the PASV response
  Resolves: rhbz#2036020


author: Charalampos Stratakis <cstratak@redhat.com> - 2.7.18-10
changelog:
  - Security fix for CVE-2022-0391: urlparse does not sanitize URLs containing ASCII newline and tabs
  Resolves: rhbz#2047376


author: Charalampos Stratakis <cstratak@redhat.com> - 2.7.18-11
changelog:
  - Security fix for CVE-2015-20107
  - Fix the test suite support for Expat >= 2.4.5
  Resolves: rhbz#2075390


author: Anna Khaitovich <akhaitov@redhat.com> - 1.7.3-13
changelog:
  - Fix two previous patches and add missing patch lines to %prep
  - Fix amplifying an incoming query into a large number of queries directed to a target
  - Resolves: rhbz#1839178 (CVE-2020-12662)


author: Anna Khaitovich <akhaitov@redhat.com> - 1.7.3-14
changelog:
  - Fix unbound-1.7.3-amplifying-an-incoming-query.patch patch
  - Resolves: rhbz#1839178 (CVE-2020-12662)


author: Anna Khaitovich <akhaitov@redhat.com> - 1.7.3-15
changelog:
  - Fix SPEC file to not check md5 mtime and size of /var/lib/unbound/root.key
  - Resolves: rhbz#1714175
  - Use system-wide crypto policy setting (PROFILE=SYSTEM) instead of custom setting
  - Resolves: rhbz#1842837
  - Enable additional logging in unbound
  - Resolves: rhbz#1850460
  - security hardening from x41 report
  - Resolves: rhbz#1859933
  - symbolic link traversal when writing PID file
  - Resolves: rhbz#1899058


author: Artem Egorenkov <aegorenk@redhat.com> - 1.7.3-16
changelog:
  - Don't start unbound-anchor before unbound service if DISABLE_UNBOUND_ANCHOR
    environment variable equals to "yes"
  - Resolves: rhbz#1922448


author: Artem Egorenkov <aegorenk@redhat.com> - 1.7.3-17
changelog:
  - Option --enable-linux-ip-local-port-range added to use system configured port range for libunbound on Linux
  - Resolves: rhbz#1830625


author: Richard Lescak <rlescak@gmail.com> - 1.7.3-18
changelog:
  - Change file mode before owner when configuring remote control unix socket to avoid AVC denials
  - Resolves: rhbz#2038251


author: Petr Menšík <pemensik@redhat.com> - 1.16.0-1
changelog:
  - Upgrade to 9.16.0 (#2027735)
  - Update to recent version with compatibility with RHEL8 (#2027735)
  - Ensure also source level compatibility with previous version


author: Jan Grulich <jgrulich@redhat.com> - 5.12.5-5
changelog:
  - Fix: Files placed by attacker can influence the working directory and lead to malicious code execution
    Resolves: bz#1814739
    Resolves: bz#1814683

  - Fix: XML entity expansion vulnerability
    Resolves: bz#1822193


author: Rex Dieter <rdieter@fedoraproject.org> - 5.10.1-3
changelog:
  - support %bootstrap, %check: add autotests
  - build with -O1 to workaround serious autotest/code failures (f28+, #1551246)


author: Remi Collet <rcollet@redhat.com> - 4.0.10-2
changelog:
  - drop build dependency on pandoc
  - drop dependency on jemalloc #1591762
  - fix License (BSD and MIT)
  - add bundled libraries licences
  - cleanup conditions from spec file


author: Remi Collet <rcollet@redhat.com> - 5.0.3-2
changelog:
  - fix Heap buffer overflow in HyperLogLog triggered by malicious client
    CVE-2019-10192
  - fix Stack buffer overflow in HyperLogLog triggered by malicious client
    CVE-2019-10193


author: Remi Collet <rcollet@redhat.com> - 6.0.9-4
changelog:
  - fix lua scripts can overflow the heap-based Lua stack
    CVE-2021-32626
  - fix integer overflow issue with Streams
    CVE-2021-32627
  - fix integer overflow bug in the ziplist data structure
    CVE-2021-32628
  - fix integer overflow issue with intsets
    CVE-2021-32687
  - fix integer overflow issue with strings
    CVE-2021-41099


author: Oyvind Albrigtsen <oalbrigt@redhat.com> - 4.9.0-16
changelog:
  - IPsrcaddr: add warning about possible issues when used with DHCP,
    and add error message when matching route not found

    Resolves: rhbz#2064342


author: Oyvind Albrigtsen <oalbrigt@redhat.com> - 4.9.0-19
changelog:
  - Filesystem: fix UUID/label device support when there's whitespace
    between parameter and UUID/label

    Resolves: rhbz#2049414


author: Oyvind Albrigtsen <oalbrigt@redhat.com> - 4.9.0-22
changelog:
  - gcp-vpc-move-route/gcp-vpc-move-vip: upgrade bundled
    python-httplib2 to fix SSL issue

    Resolves: rhbz#2097462


author: Oyvind Albrigtsen <oalbrigt@redhat.com> - 4.9.0-26
changelog:
  - openstack-cinder-volume/openstack-floating-ip/openstack-info/
    openstack-virtual-ip: new resource agents

    Resolves: rhbz#1908146, rhbz#1908147, rhbz#1908148, rhbz#1949114


author: Oyvind Albrigtsen <oalbrigt@redhat.com> - 4.9.0-29
changelog:
  - ethmonitor/pgsql: remove attrd_updater "-q" parameter to solve issue
    with Pacemaker 2.1.3+ not ignoring it

    Resolves: rhbz#2116941


author: Neil Horman <nhorman@redhat.com> - 6.8-2
changelog:
  - Fix erroneous message due to bad errno check (bz 1776710)
  - Enable addition of 0 value for fill-watermark (bz 1776710)


author: Vladis Dronov <vdronov@redhat.com> - 6.8-4
changelog:
  - There is no need to hardcode _sbindir anymore, also the old value is
    incorrect
  - Update the rngd.service file
  - Fix a busyloop bug (bz 1956248)
  - Fix /dev/hwrng permission issue (bz 1955522)


author: Vladis Dronov <vdronov@redhat.com> - 6.8-6
changelog:
  - Adjust rngd-wake-threshold.service and post section so udevadm is not
    run in a container (bz 1975554)


author: Vladis Dronov <vdronov@redhat.com> - 6.13-1.git.d207e0b6
changelog:
  - Update to the upstream v6.13 + tip of origin/master + onecpu
    branch + revert of 2ce93190
  - Rebuild rng-tools against the latest jitterentropy library
    3.0.2-2.git.409828cf with fixes for an important issue
  - Fix a number of issues (bz 1974103, bz 1980421, bz 1859154)


author: Vladis Dronov <vdronov@redhat.com> - 6.14-4.git.b2b7934e
changelog:
  - Update rng-tools to v6.14 @ b2b7934e (bz 2015570)
  - Update jitterentropy library to v3.3.1 @ 887c9871
  - Add a config file for storing rngd options
  - Fix a security issue found by a covscan in jitterentropy library


author: Vladis Dronov <vdronov@redhat.com> - 6.15-1
changelog:
  - Update rng-tools to v6.15 @ 172bf0e3 (bz 2075974)
  - Update jitterentropy library to v3.4.0 @ 887c9871
  - Allow rngd process to drop privileges with "-D user:group"
  - Fix an error building with jitterentropy-3.4.0
  - Add a requirement for selinux-policy of a certain version
  - Fix a build failure on ppc64
  - Small edits in test scripts


author: Steve Dickson <steved@redhat.com> - 1.2.5-1
changelog:
  - Fixed stack buffer overflow in rpcinfo (bz 1637565)
  - Make sure /var/lib/rpcbind exists (bz 1628901)


author: Michal Ruprich <mruprich@redhat.com> - 3.1.3-19
changelog:
  - Resolves: #2116668 - zlib: a heap-based buffer over-read or buffer overflow in inflate in inflate.c via a large gzip header extra field


author: Jun Aruga <jaruga@redhat.com> - 0.5.2-1
changelog:
  - New upstream release 0.5.2 by merging Fedora master branch (commit: cc15309)
    Resolves: rhbz#1672575


author: Jun Aruga <jaruga@redhat.com> - 0.5.3-1
changelog:
  - New upstream release 0.5.3 by merging Fedora master branch (commit: 674d475)
    Resolves: rhbz#1817135


author: Jarek Prokop <jprokop@redhat.com> 0.5.3-2
changelog:
  - Update by merging Fedora rawhide branch (commit: 81e2cc9)
  - Fix Mysql2::Result test for Ruby 3.1.
  - Remove gem_make.out and mkmf.log files from the binary RPM package.
  - Fix test assertion for mariadb-connector-c.
    Related: rhbz#2063772


author: Jun Aruga <jaruga@redhat.com> - 1.1.4-1
changelog:
  - Update to pg 1.1.4 by merging Fedora master branch (commit: 397796e)
    * BuildRequires: s/postgresql-devel/libpq-devel/
    * Add marking lines at the start and end of the setup.log
    Resolves: rhbz#1672575


author: Klaus Wenninger <kwenning@redhat.com> - 1.4.1-6
changelog:
  - match qdevice-sync_timeout against wd-timeout
  - sync startup/shutdown via pacemakerd-api

    Resolves: rhbz#1703128
    Resolves: rhbz#1743726


author: Klaus Wenninger <kwenning@redhat.com> - 1.4.1-7
changelog:
  - conflict with pacemaker-libs < 2.0.4-5 instead of requiring
    a minimum pacemaker version

    Resolves: rhbz#1861713


author: Klaus Wenninger <kwenning@redhat.com> - 1.4.2-1
changelog:
  - rebase to upstream v1.4.2
  - make sbd default to do pacemakerd-api handshake
  - conflict with pacemaker-libs < 2.0.5-4 to assure pacemaker
    is defaulting to pacemakerd-api handshake

    Resolves: rhbz#1903730
    Resolves: rhbz#1873135


author: Klaus Wenninger <kwenning@redhat.com> - 1.4.2-3
changelog:
  - change the default for SBD_WATCHDOG_TIMEOUT to 10s
    s390(x) stays at 15s as before

    Resolves: rhbz#1922143


author: Klaus Wenninger <kwenning@redhat.com> - 1.5.0-2
changelog:
  - reverted watchdog_timeout_default to 5s
    (slipped in via an unreleased change on 8.4.0 branch)

    Resolves: rhbz#1980797


author: Vit Mojzis <vmojzis@redhat.com> - 3.3.23-1
changelog:
  - browser: Check return value of Gdk.Screen().get_default() (#1574434)
  - Improve and unify error messages (#1763982)
  - setroubleshoot.util: Catch exceptions from sepolicy import
  - Add dpkg support
  - Do not refer to hardcoded selinux-policy rpm in signature
  - Make date/time format locale specific (#1812674)
  - Improve speed of plugin evaluation (#1794807)
  - Do not try to report a bug on None package
  - sealert: Drop unused import slib.dbus.service
  - Drop updater.py - it's not used and doesn't work
  - root user doesn't need to use SetroubleshootPrivileged API
  - Use pydbus, a modern Python dbus API, for SetroubleshootPrivileged
  - Report bug on a package which owns the related SELinux domain (#1811644)
    https://pagure.io/setroubleshoot/issue/18
  - Add Local SELinux policy package version to analyses reports
  - setroubleshoot.utils.get_rpm_nvr_by_scontext add option to use DBUS method
  - Export setroubleshoot.utils.get_rpm_nvr_by_scontext via DBUS
  - setroubleshoot.util: get_rpm_nvr_by_type() and get_rpm_nvr_by_scontext()


author: Vit Mojzis <vmojzis@redhat.com> - 3.3.24-1
changelog:
  - Add 'fur' into shipped locales
  - Update translations (#1820570)
  - Log full reports with correct syslog identifier
  - Cancel pending alarm during AVC analyses


author: Vit Mojzis <vmojzis@redhat.com> - 3.3.24-2
changelog:
  - Optimize get_rpm_nvr_by_type by adding a cache (#1794807)
  - Stop building seappletlegacy (#1878792)
  - Update translations


author: Vit Mojzis <vmojzis@redhat.com> - 3.3.26-1
changelog:
  - Revert "Replace pydbus with dasbus"
  - Fix typos in --help, man pages and developer's guide (#2028226)
  - Do not use Python slip package
  - Stop SetroubleshootFixit after 10 seconds of inactivity
  - Fix plugin exception reporting
  - export alert dbus signal
  - Make sure local_policy_package is not None
  - sealert: add "Last Seen" column to alert list


author: Vit Mojzis <vmojzis@redhat.com> - 3.3.26-4
changelog:
  - Decrease setroubleshootd priority and limit RAM utilization to 1GB (#2064727)
  - doc: Document performance related changes


author: Tomas Bzatek <tbzatek@redhat.com> - 1.44-3
changelog:
  - Fix sg_turs help invocation in an old mode (#1683343)
  - Fix sg_raw printing error about device not specified on version request (#1627657)


author: Tomáš Mráz <tmraz@redhat.com> - 2:4.6-8
changelog:
  - properly audit group password change
  - do not add uid of a new (not yet added) user to the audit message
  - use lckpwdf() again to disable concurrent edits of databases by
    other applications
  - clarify chage manual page in regards to shadow and passwd
    inconsistency
  - fix minor issues in groupadd and login.defs manual pages
  - Ignore LOGIN_PLAIN_PROMPT variable in login.defs
  - force regeneration of getdate.c otherwise the date parsing fix
    is not applied


author: Iker Pedrosa <ipedrosa@redhat.com> - 2:4.6-9
changelog:
  - do not mistake a regular user process for a namespaced one (#1788696)
  - add HOME_MODE support in login.defs (#1777718)


author: Iker Pedrosa <ipedrosa@redhat.com> - 2:4.6-12
changelog:
  - lib/sssd: redirect warning message to file (#1749001)
  - useradd: clarify valid usernames/groupnames (#1869432)
  - login.defs: link login specific information to its own package (#1804766)


author: Iker Pedrosa <ipedrosa@redhat.com> - 2:4.6-15
changelog:
  - Creation of subid and subid-devel subpackages (#2013009)
  - libsubid: creation and nsswitch support
  - libsubid: don't print error messages on stderr by default
  - libsubid: libsubid_init return false if out of memory
  - libsubid: don't return owner in list_owner_ranges API call
  - libsubid: libsubid_init don't print messages on error
  - libsubid: fix newusers when nss provides subids
  - libsubid: make shadow_logfd not extern
  - useradd: fix SUB_UID_COUNT=0
  - man: mention NSS in new[ug]idmap manpages
  - man: clarify subid delegation


author: Iker Pedrosa <ipedrosa@redhat.com> - 2:4.6-16
changelog:
  - getsubids: provide system binary and man page. Resolves: #2013016
  - groupdel: fix SIGSEGV when passwd does not exist. Resolves: #1986782


author: Iker Pedrosa <ipedrosa@redhat.com> - 2:4.6-17
changelog:
  - subordinateio: also compare the owner ID. Resolves: #2093311
  - Fix release sources
  - Add subid requirement for subid-devel


author: Javier Martinez Canillas <javierm@redhat.com> - 15-3
changelog:
  - Make EFI variable copying fatal only on secureboot enabled systems
    Resolves: rhbz#1704854
  - Fix booting shim from an EFI shell using a relative path
    Resolves: rhbz#1717063


author: Peter Jones <pjones@redhat.com> - 15-7
changelog:
  - Backport this to EL 8 so we can build-dep on the right version.
    Related: CVE-2020-14372 (and others)


author: Javier Martinez Canillas <javierm@redhat.com> - 15-3
changelog:
  - Make EFI variable copying fatal only on secureboot enabled systems
    Resolves: rhbz#1715878
  - Fix booting shim from an EFI shell using a relative path
    Resolves: rhbz#1717064


author: Peter Jones <pjones@redhat.com> - 15-4
changelog:
  - Rebuild for bug fixes and new signing keys
    Related: CVE-2020-10713
    Related: CVE-2020-14308
    Related: CVE-2020-14309
    Related: CVE-2020-14310
    Related: CVE-2020-14311


author: Peter Jones <pjones@redhat.com> - 15-5
changelog:
  - Once more with the MokListRT config table patch added.
    Related: CVE-2020-10713
    Related: CVE-2020-14308
    Related: CVE-2020-14309
    Related: CVE-2020-14310
    Related: CVE-2020-14311


author: Peter Jones <pjones@redhat.com> - 15-7
changelog:
  - Implement Lenny's workaround
    Related: CVE-2020-10713
    Related: CVE-2020-14308
    Related: CVE-2020-14309
    Related: CVE-2020-14310
    Related: CVE-2020-14311


author: Peter Jones <pjones@redhat.com> - 15-8
changelog:
  - Fix a load-address-dependent forever loop.
    Resolves: rhbz#1861977
    Related: CVE-2020-10713
    Related: CVE-2020-14308
    Related: CVE-2020-14309
    Related: CVE-2020-14310
    Related: CVE-2020-14311
    Related: CVE-2020-15705
    Related: CVE-2020-15706
    Related: CVE-2020-15707


author: Eugene Syromiatnikov <esyr@redhat.com> - 5.13-1
changelog:
  - Rebase to v5.13; drop upstream patches on top of 5.7 (#2015917).
  - Address some issues reported by covscan.


author: Eugene Syromiatnikov <esyr@redhat.com> - 5.18-2
changelog:
  - Fix the issues reported by covscan (#2103068).
  - Fix SELinux context matching for the deleted paths (#2087693).
  - Fix sloppy FD usage in the bpf test (#2103137).


author: systemd maintenance team <systemd-maint@redhat.com> - 239-59
changelog:
  - core: disallow using '-.service' as a service name (#2051520)
  - shared/dropin: support -.service.d/ top level drop-in for service units (#2051520)
  - core: change top-level drop-in from -.service.d to service.d (#2051520)
  - shared/dropin: fix assert for invalid drop-in (#2051520)
  - udev: fix slot based network names on s390 (#1939914)
  - udev: it is not necessary that the path is readable (#1939914)
  - udev: allow onboard index up to 65535 (#1939914)
  - Revert "basic: use comma as separator in cpuset cgroup cpu ranges" (#1858220)
  - acpi-fpdt: mark structures as packed (#2047373)
  - core/slice: make slice_freezer_action() return 0 if freezing state is unchanged (#2047373)
  - core/unit: fix use-after-free (#2047373)
  - sd-bus: fix reference counter to be incremented (#2047373)
  - sd-bus: do not read unused value (#2047373)
  - sd-bus: do not return negative errno when unknown name is specified (#2047373)
  - sd-bus: switch to a manual overflow check in sd_bus_track_add_name() (#2047373)
  - spec: Add dependency on timedatex (#2066946)


author: systemd maintenance team <systemd-maint@redhat.com> - 239-60
changelog:
  - unit: don't emit PropertiesChanged signal if adding a dependency to a unit is a no-op (#1948480)
  - tests: make inverted tests actually count (#2087152)
  - TEST-*: make failure tests actually fail on failure (#2087152)
  - ci(Mergify): configuration update (#2087152)
  - core: propagate triggered unit in more load states (#2065322)
  - core: propagate unit start limit hit state to triggering path unit (#2065322)
  - core: Move 'r' variable declaration to start of unit_start() (#2065322)
  - core: Delay start rate limit check when starting a unit (#2065322)
  - core: Propagate condition failed state to triggering units. (#2065322)
  - unit: check for mount rate limiting before checking active state (#2095744)


author: systemd maintenance team <systemd-maint@redhat.com> - 239-61
changelog:
  - mkosi: Add gnutls package (#2101227)
  - unit-name: tighten checks for building valid unit names (#1940973)
  - core: shorten long unit names that are based on paths and append path hash at the end (#1940973)
  - test: add extended test for triggering mount rate limit (#1940973)
  - tests: add test case for long unit names (#1940973)
  - core: unset HOME=/ that the kernel gives us (#2056527)
  - journal-remote: check return value from MHD_add_response_header (#2051981)
  - journalctl: in --follow mode watch stdout for POLLHUP/POLLERR and exit (#2003236)
  - sd-bus: make BUS_DEFAULT_TIMEOUT configurable (#2039461)
  - fstab-generator: fix debug log (#2101433)
  - logind-session-dbus: allow to set display name via dbus (#1857969)
  - Allow restart for oneshot units (#2042896)
  - test: correct TEST-41 StartLimitBurst test (#2042896)
  - core: fix assert() about number of built environment variables (#2049788)
  - core: add one more assert() (#2049788)
  - strv: introduce strv_join_prefix() (#2049788)
  - test: add tests for strv_join_prefix() (#2049788)
  - test: replace swear words by 'hoge' (#2049788)
  - core: add new environment variable $RUNTIME_DIRECTORY= or friends (#2049788)
  - test-execute: add tests for $RUNTIME_DIRECTORY= or friends (#2049788)
  - man: document RUNTIME_DIRECTORY= or friends (#2049788)


author: systemd maintenance team <systemd-maint@redhat.com> - 239-64
changelog:
  - ci: bump the worker Ubuntu version to Jammy (#2087152)
  - test: make test-execute pass on Linux 5.15 (#2087152)
  - ci: install iputils (#2087152)
  - ci(Mergify): Add `ci-waived` logic (#2087152)
  - sd-event: don't invalidate source type on disconnect (#2115396)
  - tests: make sure we delay running mount start jobs when /p/s/mountinfo is rate limited (#2095744)
  - core: drop references to 'StandardOutputFileToCreate' (#2093479)
  - dbus-execute: fix indentation (#2093479)
  - dbus-execute: generate the correct transient unit setting (#2093479)
  - bus-unit-util: properly accept StandardOutput=append:… settings (#2093479)
  - core: be more careful when inheriting stdout fds to stderr (#2093479)
  - test: add a test for StandardError=file:… (#2093479)
  - tree-wide: allow ASCII fallback for → in logs (#2093479)
  - tree-wide: allow ASCII fallback for … in logs (#2093479)
  - core: allow to set default timeout for devices (#1967245)
  - man: document DefaultDeviceTimeoutSec= (#1967245)
  - Revert "core: Propagate condition failed state to triggering units." (#2114005)
  - core: Check unit start rate limiting earlier (#2114005)
  - core: Add trigger limit for path units (#2114005)
  - meson: add syscall-names-update target (#2040247)
  - syscall-names: add process_madvise which is planned for 5.10 (#2040247)
  - shared: add @known syscall list (#2040247)
  - generate-syscall-list: require python3 (#2040247)
  - shared/seccomp: reduce scope of indexing variables (#2040247)
  - shared/syscall-list: filter out some obviously platform-specific syscalls (#2040247)
  - seccomp: tighten checking of seccomp filter creation (#2040247)
  - shared/seccomp-util: added functionality to make list of filtred syscalls (#2040247)
  - nspawn: return ENOSYS by default, EPERM for "known" calls (#2040247)
  - revert: resolved: pin stream while calling callbacks for it (#2110549)


author: systemd maintenance team <systemd-maint@redhat.com> - 239-66
changelog:
  - Try stopping MD RAID devices in shutdown too (#1817706)
  - shutdown: get only active md arrays. (#1817706)
  - scope: allow unprivileged delegation on scopes (#2068575)


author: systemd maintenance team <systemd-maint@redhat.com> - 239-67
changelog:
  - resolved: pin stream while calling callbacks for it (#2110549)
  - ci(functions): Add `useradd` and `userdel` (#2110549)


author: systemd maintenance team <systemd-maint@redhat.com> - 239-68
changelog:
  - logind: optionally watch utmp for login data (#2122288)
  - logind: add hashtable for finding session by leader PID (#2122288)
  - core/load-fragment: move config_parse_sec_fix_0 to src/shared (#2122288)
  - sd-event: add relative timer calls (#2122288)
  - logind: add option to stop idle sessions after specified timeout (#2122288)
  - logind: schedule idle check full interval from now if we couldn't figure out atime timestamp (#2122288)


author: Stan Cox <scox@redhat.com> - 4.7-1
changelog:
  - Upstream release, see wiki page below for detailed notes.
    https://sourceware.org/systemtap/wiki/SystemTapReleases


author: Pavel Raiskup <praiskup@redhat.com> - 1.30-1
changelog:
  - rebase to latest upstream release, per release notes
    http://lists.gnu.org/archive/html/info-gnu/2017-12/msg00011.html


author: Ondrej Dubaj <odubaj@redhat.com> - 1.30-6
changelog:
  - added "padding with zeros" info message (#1913566)
  - do not report disk error as file shrank (#1913569)


author: Tony Camuso <tcamuso@redhat.com> - 1:1.9.7-1
changelog:
  - Rebase to the latest upstream version.
    Resolves: rhbz#1511799
  - Do not override OPTFLAGS in the make
    Resolves: rhbz#1620070


author: Tony Camuso <tcamuso@redhat.com> - 1:1.9.12-1
changelog:
  - Add patch to revert "Disable GCC9 address-of-packed-member warning"
    While it was able to build locally with 'rhpkg local', the brew
    build failed, because the compiler on the brew systems did not
    recognized the new GCC9 command line flag:
    -Wno-address-of-packed-member


author: Tony Camuso <tcamuso@redhat.com> - 1:1.9.12-2
changelog:
  - Fix build issues with one upstream patch.
    This patch also reverts the previous patch concerning the
    -Wno-address-of-packed-member cflag.
    Resolves: rhbz#1847938


author: Tony Camuso <tcamuso@redhat.com> - 1:1.10.0-0
changelog:
  Upgrade to latest upstream version
    Added upstream patch to remove deprecated man pages
    Resolves: rhbz#1857068


author: Tony Camuso <tcamuso@redhat.com> - 1:1.10.0-1
changelog:
  Build problem creating directory for grub modules. We can't
    know if the modules are there, so it's up to the end user to
    find the modules and copy them to the correct location.
    Specifically, for systems booting from EFI, the
    /boot/efi/EFI/redhat/x86_64-efi/multiboot2.mod file, if it
    exists, must be copied to the /boot/efi/EFI/redhat/x86_64-efi/
    directory. If that file does not exist, then the system has
    the wrong version of grub for using tboot in an EFI system.
    Resolves: rhbz#1857068


author: Tony Camuso <tcamuso@redhat.com> - 1:1.10.0-1
changelog:
  Need to add BuildRequires: perl, since it has beem moved
    from BuildRoot.
    See: https://fedoraproject.org/wiki/Packaging:Perl#Build_Dependencies
    Resolves: rhbz#1857068


author: Tony Camuso <tcamuso@redhat.com> - 1:1.10.1-1
changelog:
  Upgrade to tboot-1.10.2-1 provides some bug fixes and updates.
    Remove 0001-Do-not-install-man-pages-for-deprecated-tools.patch
    from the git repo, since it is no longer needed.
    Resolves: rhbz#1857068
    Resolves: rhbz#1873296
    Resolves: rhbz#1920386


author: Tony Camuso <tcamuso@redhat.com> - 1:1.10.5-1
changelog:
  Upgrade to tboot-1.10.5-1 for fixes and updates.
    Added a scriptlet to the tboot.spec file to automatically install
    grub2-efi-x64-modules and move them to the correct directory.
    Resolves: rhbz#2040082
    Resolves: rhbz#2041759


author: Lukáš Zaoral <lzaoral@redhat.com> - 5.2-25
changelog:
  - Fix inconsistent --map-file option spelling in manual (rhbz#2066853)
  - Fix memory corruption in tftpd when filename remapping with macro \x
    is used (rhbz#2066862)


author: Jan Grulich <jgrulich@redhat.com> - 1.12.0-4
changelog:
  - Added vncsession-restore script for SELinux policy migration
    Fix SELinux context for root user
    Resolves: bz#2021892


author: Javier Martinez Canillas <javierm@redhat.com> - 2.0.0-1
changelog:
  - Download the distributed tarball instead of the source code tarball
  - Update URLs to point to the new project location
  - Update to 2.0.0 release


author: Richard W.M. Jones <rjones@redhat.com> - 1.18-8
changelog:
  - Add support for Nutanix AHV
    resolves: rhbz#1756381
  - Add all patches since 1.18 was released, up to 1.20 and beyond.


author: Than Ngo <than@redhat.com> - 2.21-17
changelog:
  - Resolves: #2025709, check shell correctly 
  - Resolves: #2009547, which treats function contents as aliases when parsing ksh


author: Michal Ruprich <mruprich@redhat.com> - 1:2.6.2-7
changelog:
  - Resolves: #1642919 - CVE-2018-12086, CVE-2018-18225, CVE-2018-18226, CVE-2018-18227
  - Resolves: #1656342 - CVE-2018-19623
  - Resolves: #1657634 - CVE-2018-19625
  - Resolves: #1657211 - CVE-2018-19626
  - Resolves: #1657184 - CVE-2018-19627
  - Resolves: #1657190 - CVE-2018-19628
  - fixes CVE-2018-19622, CVE-2018-19624


author: Michal Ruprich <mruprich@redhat.com> - 1:2.6.2-15
changelog:
  - Resolves: #2119126 - Wireshark source rpm fails to build due to looking for incorrect libssh header files


author: Tomas Popela <tpopela@redhat.com> - 1.6.0-5
changelog:
  - Drop PipeWire 0.2 requirement as Chrom[e|ium] 90 now depends on PipeWire 0.3
  - Resolves: rhbz#1949809


author: Jonas Ådahl <jadahl@redhat.com> - 1.6.0-1
changelog:
  - Rebase to 1.6.0 (#1837413)
  - Bump supported Mutter screen cast API version (#1837413)
  - Backport bugfix (#1837413)


author: Debarshi Ray <rishi@fedoraproject.org> - 1.8.0-1
changelog:
  - Rebase to 1.8.0
  - Remove unnecessary non-arch-specific explicit library Requires
  Resolves: #2062432


author: Rob Crittenden <rcritten@redhat.com> - 1.51.0-7
changelog:
  - lib: Prevent more integer overflows (CVE-2022-22822 to CVE-2022-22827)
    (#2058567, #2058576, #2058582, #2058589, #2058595, #2058602)
  - Prevent integer overflow on m_groupSize in doProlog
    (CVE-2021-46143) (#2058560)


author: Olivier Fourdan <ofourdan@redhat.com> - 1.20.11-4
changelog:
  - CVE fix for: CVE-2021-4008 (#2030162), CVE-2021-4009 (#2030172),
    CVE-2021-4010 (#2030175), CVE-2021-4011 (#2030181)


author: Olivier Fourdan <ofourdan@redhat.com> - 1.20.11-9
changelog:
  - CVE fix for: CVE-2022-2319/ZDI-CAN-16062, CVE-2022-2320/ZDI-CAN-16070
    Resolves: rhbz#2108156, rhbz#2108161


author: Olivier Fourdan <ofourdan@redhat.com> - 21.1.3-2
changelog:
  - CVE fix for: CVE-2021-4008 (#2038066), CVE-2021-4009 (#2038068),
    CVE-2021-4010 (#2038071), CVE-2021-4011 (#2038073)


author: Olivier Fourdan <ofourdan@redhat.com> - 21.1.3-6
changelog:
  - CVE fix for: CVE-2022-2319/ZDI-CAN-16062, CVE-2022-2320/ZDI-CAN-16070
    Resolves: rhbz#2110442, rhbz#2110437


author: Ondrej Dubaj <odubaj@redhat.com> - 1.2.11-11
changelog:
  - IBM Z hardware-accelerated deflate for s390x architectures
  - IBM CRC32 optimalization for POWER 8+ architectures
  - fixed firefox crash due to zlib (#1741266)
  - added test for crc32


author: Ondrej Dubaj <odubaj@redhat.com> - 1.2.11-13
changelog:
  - Added -DDFLTCC parameter to configure to enable 
  - Z hardware-accelerated deflate for s390x architectures (#1659433)


author: Ondrej Dubaj <odubaj@redhat.com> - 1.2.11-16
changelog:
  - Permit a deflateParams() parameter change
  - Another fix for Z hardware-accelerated deflate for s390x architectures
  - according to previous change by upstream


author: Ondrej Dubaj <odubaj@redhat.com> - 1.2.11-17
changelog:
  - Fixed DFLTCC compression level switching issues (#1875492)
  - Enabled HW compression for compression levels 1 through 6 (#1847438)
  - Fixed inflateSyncPoint() bad return value on z15 (#1888930)


author: Lukas Javorsky <ljavorsk@redhat.com> - 1.2.11-19
changelog:
  - Apply IBM patch for compressBound() function
  - Source from https://github.com/madler/zlib/issues/410#issuecomment-947212824
  - Resolves: #2056900


author: Matej Mužila <mmuzila@redhat.com> - 1.2.11-20
changelog:
  - Fix heap-based buffer over-read or buffer overflow in inflate in inflate.c
  - Resolves: CVE-2022-37434


