=head1 NAME

INSTALL - Apache mod_perl installation instructions

=head1 DESCRIPTION

How to build, test, configure and install mod_perl

=head1 PREREQUISITES

=over 3

Apache version 1.3.6+

Perl version 5.004 or higher (5.005_03 or higher recommended)

Win32 users, see INSTALL.win32

=back

=head1 Build and install mod_perl

=over 3

In this current directory run:

  perl Makefile.PL
  make
  make test (optional)	
  make install

Makefile.PL will search for apache source trees to configure against, 
if no source trees are found, you will be prompted for a path to one.

When asked:

  "Configure mod_perl with ../apache_xxx/src ?"

answering 'y' just tells Makefile.PL where we can find src/*.h

When asked:

  "Shall I build httpd in $adir for you?"

answering 'y' will run ../apache_xxx/src/Configure 
and httpd will be built when running 'make'

To avoid this prompt and default to the first apache source tree found
to configure and build against, use the following command:

  perl Makefile.PL DO_HTTPD=1

To avoid the prompts and avoid building httpd, use the following
command:

  perl Makefile.PL NO_HTTPD=1

You may wish see the instructions below on how to build by hand.

In any case, you need to 'make install' so the perl side of mod_perl
will be installed.

By default, all callback hooks except for PerlHandler are turned off.
You may edit src/modules/perl/Makefile, or enable when running
Makefile.PL

Possible arguments are:

  PERL_POST_READ_REQUEST
  PERL_TRANS
  PERL_INIT

  PERL_HEADER_PARSER
  PERL_AUTHEN
  PERL_AUTHZ
  PERL_ACCESS
  PERL_TYPE
  PERL_FIXUP
  PERL_LOG
  PERL_CLEANUP
  PERL_CHILD_INIT
  PERL_CHILD_EXIT
  PERL_DISPATCH
  
  PERL_STACKED_HANDLERS
  PERL_METHOD_HANDLERS
  PERL_SECTIONS
  PERL_SSI

Example to enable PerlAuthenHandler and PerlFixupHandler:
 
  perl Makefile.PL PERL_AUTHEN=1 PERL_FIXUP=1

To enable all callback hooks:

  perl Makefile.PL ALL_HOOKS=1 

To enable _all_ of the above, set EVERYTHING=1

  perl Makefile.PL EVERYTHING=1

To enable tracing set PERL_TRACE=1

  perl Makefile.PL PERL_TRACE=1

If a file name `makepl_args.mod_perl' is found in the same directory
as the mod_perl build location with any of these options, it will be
read in by Makefile.PL

Example:

 % ls -1 .
 apache_1.3/
 makepl_args.mod_perl
 mod_perl-1.12/

 % cat makepl_args.mod_perl
 EVERYTHING=1 DO_HTTPD=1

 % cd mod_perl-1.12
 % perl Makefile.PL && make test && make install

You'll see all options enabled and you will not be prompted for apache
source location, it will default to ../apache_1.3

There is a sample makepl_args.mod_perl in the eg/ directory, in which
you might find a few options to enable experimental features to play
with too! :-)

=item Installation of Apache header files

By default, the apache headers files are installed into 
$Config{sitearchexp}/auto/Apache/include

The reason for installing the header files is to make life simple for
module authors/users when building/installing a module that taps into
some Apache C functions, e.g. Embperl, Apache::Peek, etc. 

If you wish not to install these files, tell Makefile.PL like so:

 perl Makefile.PL APACHE_HEADER_INSTALL=0

=item Linking Perl extensions static with httpd

Normally, if an extension is linked static with Perl it is listed in
Config.pm's $Config{static_exts}, in which case, mod_perl will also
link this extension static with httpd.  However, if an extension is
linked static with Perl after it is installed, it is not listed in
Config.pm.  You may either edit Config.pm and add these extensions, or
configure mod_perl like so:

 perl Makefile.PL "PERL_STATIC_EXTS=Something::Static Another::One" 

=back

=head1 Testing mod_perl

=over 3

Running 'make test' will start an httpd on port 8529 running under
the uid and gid of the 'perl Makefile.PL' process, the httpd will 
be terminated when the tests are finshed.

To change the default port say:

 perl Makefile.PL PORT=xxxx

To simply start the newly build httpd before 'make install' run:

 make start_httpd

To shutdown this httpd run:

 make kill_httpd

See t/README on how to run the mod_perl test suite by hand

NOTE to Ben-SSL users:
httpsd does not seem to handle '/dev/null' as the location of certain
files, you'll have to change these by hand. 
Tests are run with 'SSLDisable'

=back

=head1 Using an alternative Configuration file

=over 3

If you wish to use a B<Configuration> file without having mod_perl's
Makefile.PL give it's copy to apache's B<Configuration>, configure
like so:

 perl Makefile.PL CONFIG=Configuration.custom

Where B<Configuration.custom> is the name of any file relative to the
apache source tree you build against.  See the "building apache and
mod_perl by hand" instructions below on how to add the mod_perl
information to your custom Configuration file.

=back

=head1 Building apache and mod_perl by hand

=over 3

** Only if you did not let Makefile.PL take care of this already **

=item mod_perl Makefile

When Makefile.PL is run $APACHE_SRC/modules/perl/Makefile will be
modified to enable options (e.g. ALL_HOOKS=1)

You may also edit mod_perl-x.xx/src/modules/perl/Makefile before
or after running Makefile.PL if you wish  

=item Configuration

Edit apache_xxx/src/Configuration, adding:

  AddModule modules/perl/libperl.a

We suggest you add this entry at the end of the Configuration file if
you want your callback hooks to have precedence over core handlers. 

Add the following to EXTRA_LIBS:

  EXTRA_LIBS=`perl -MExtUtils::Embed -e ldopts`

Add the following to EXTRA_CFLAGS:

  EXTRA_CFLAGS=`perl -MExtUtils::Embed -e ccopts` 

=item mod_perl source files

Copy the source files into the apache build directory:

 % cp -r src/modules/perl apache_xxx/src/modules/

Run:

 % perl Makefile.PL DYNAMIC=1 && make install

When prompted, you must tell Makefile.PL where to find apache sources
(for header files), answer 'n' when asked 
"Shall I build httpd in ../apache_x.x.x/src for you?"

Follow the apache install docs from there

=back

=head1 Configuring and building with Stronghold

=over 3

You must first build and install Stronghold without mod_perl,
following Stronghold's install procedure.

Then, you may rebuild following the instructions above to:

 Build and install mod_perl

  or

 Building apache and mod_perl by hand

Before running `make test', you must add your `StrongholdKey' 
to t/conf/httpd.conf

I you are configuring by hand, be sure to edit
src/modules/perl/Makefile and uncomment #APACHE_SSL

For Solaris 2.5 users, there has been a report related to the REGEX
that comes with Stronghold, after building Apache with mod_perl would
produce core dumps. 
To get around this:

In STRONGHOLD/src/Configuration, Change:

  Rule WANTHSREGEX=default

To:

  Rule WANTHSREGEX=no

=back

=head1 Installing on multiple machines

=over 3

You may wish to build httpd once, then copy it to other machines.
The Perl side of mod_perl needs the apache headers files to compile,
to avoid dragging and build apache on all your other machines, there
are a few Makefile targets to help you out:

   'make tar_Apache'

This will tar all files mod_perl installs in your 'site_perl' directory,
into a file called 'Apache.tar'.
You can then unpack this under 'site_perl' on another machine.

   'make offsite-tar'

This will copy all header files from the apache source directory you 
configured mod_perl against, then it will 'make dist' where you'll
a mod_perl-x.xx.tar.gz created, ready to unpack on another machine
to compile and install the Perl side of mod_perl.

=back

=head1 Notes

=over 3

=item Compilers

On most systems, both Perl and Apache+mod_perl must be built using the
same compiler.  Sometimes Perl's configuration will choose one
compiler, e.g. I<cc>, but Apache's configuration chooses a different
one, e.g. I<gcc>.  If you run into this problem, consult Perl's and
Apache's INSTALL documents on how to ensure both are built with the
same compiler. 

=item BSDI users

Gary Shea <shea@xmission.com> discovered a nasty BSDI bug (seen in
versions 2.1 and 3.0) related to dynamic loading and two workarounds: 

Turns out they use argv[0] to determine where to find the link
tables at run-time, so if a program either changes argv[0],
or does a chdir() (like apache!), it can easily confuse the
dynamic loader.  The short-term solutions to the problem are
pitifully simple.  Either of the following will work:

1) Call httpd with a full path, e.g. /opt/www/bin/httpd

2) Put the httpd you wish to run in a directory in your PATH
before any other directory containing a version of httpd, then
call it as 'httpd' -- don't use a relative path!

=item more info

Type 'perldoc mod_perl' for info on configuring, running
and writing Apache/Perl scripts and modules.

=back
 
=head1 Support

See the SUPPORT file.





