Setup and Configuration

## 4 Setup and Configuration

Note | The Jakarta EE Specification process provides for any number of compatible implementations. As additional implementations become available, refer to project or product documentation from those vendors for specific TCK setup and operational guidance.

This chapter describes how to set up the Messaging TCK and JavaTest harness software. Before proceeding with the instructions in this chapter, be sure to install all required software, as described in Chapter 3, "Installation."

After completing the instructions in this chapter, proceed to Chapter 5, "Executing Tests," for instructions on running the Messaging TCK.

### 4.1 Configuring Your Environment to Run the TCK Against the Reference Implementation

After configuring your environment as described in this section, continue with the instructions in Section 4.6, "Using the JavaTest Harness Software."

Note | In these instructions, variables in angle brackets need to be expanded for each platform. For example, `<TS_HOME>` becomes `$TS_HOME` on Solaris/Linux and `%TS_HOME%` on Windows. In addition, the forward slashes (`/`) used in all of the examples need to be replaced with backslashes (`\`) for Windows. Finally, be sure to use the appropriate separator for your operating system when specifying multiple path entries (`;` on Windows, `:` on UNIX/Linux). On Windows, you must escape any backslashes with an extra backslash in path separators used in any of the following properties, or use forward slashes as a path separator instead.

#### 4.1.1 To Configure Your Environment for the Messaging TCK

1. Set the following environment variables in your shell environment:

   - `JAVA_HOME` to the directory in which Java SE 8 is installed

   - `TS_HOME` to the directory in which the Messaging 2.0 software is installed

   - `JMS_HOME` to the directory in which the Messaging 2.0 CI has been installed

   - `PATH` to include the following directories: `JAVA_HOME/bin`, `JMS_HOME/bin`, and `<TS_HOME>/tools/ant/bin`

2. Edit your `<TS_HOME>/bin/ts.jte` file and set the following properties:

   - `jms.home` to the directory in which you installed your Messaging 2.0 implementation

   - `jms.classes` to the JAR file(s) that contain your Messaging 2.0 implementation classes
     For example, if you are using the Eclipse OpenMQ 5.0 CI, the `jms.classes` property would be set to `jms.classes=${ri.jars}`.

   - `impl.vi` to the Messaging 2.0 implementation being tested
     This property signals which configuration script to execute for the `config.vi` and `clean.vi` Ant targets. These targets handle starting and stopping the Messaging implementation under test as well as creating and deleting all of the Messaging administered objects and Messaging users needed by the Messaging TCK.
     The `ts.jte` file supports two Messaging 2.0 Compatible Implementations: Eclipse OpenMQ 5.0 CI and Eclipse GlassFish 5.1 CI.
     For example, if using the Eclipse OpenMQ 5.0 CI , the `impl.vi` property is set to `impl.vi=ri`. With this setting, the config.vi and clean.vi ant targets will invoke the script under `<TS_HOME>/bin/xml/impl/ri/config.vi.xml`.

   - `user` to a valid user name in the Messaging implementation

   - `password` to the password for the user that was specifiedwith the `user` property

   - `jms_timeout` to the length of time used to receive messages

   - `harness.log.port` to the port number that will be used for logging

   - `porting.ts.jmsObjects.class.1` to point to your porting implementation, if you implemented the TSJMSObjectInterface interface
     If you did not implement the interface, use the default setting.

3. If your Messaging 2.0 implementation does not support the `MY_QUEUE`, `MY_TOPIC`, `MyQueueConnectionFactory`, or `MyTopicConnectionFactory` JNDI names, you must provide your own implementation of the `TSJMSObjectInterface` interface. See Implementing the Messaging TCK Porting Package Interface for additional infomation about the TSJMSObjectInterface interface.

4. If you are using the Eclipse OpenMQ 5.0 CI on the Windows platform, edit the `<TS_HOME>/bin/ts.jte` file and add the drive letter to the `admin.pass.file` and `jndi.fs.dir` properties. The property settings for the Windows platform are as follows:

       admin.pass.file=C:/tmp/ripassword
       jndi.fs.dir=C:/tmp/ri_admin_objects

   Edit the `<TS_HOME>/bin/xml/impl/ri/jndi.properties` file and add the drive letter to the `java.naming.provider.url` property. The property setting for the Windows platform is as follows:

       java.naming.provider.url=file:///C:/tmp/ri_admin_objects

#### 4.1.2 To Configure and Start Your Messaging 2.0 Implementation

1. Set `JMS_HOME` to the location where your Messaging implementation has been installed.

2. Start the JNDI service.

   Note | A Vendor Implementation is not required to use a JNDI provider as the object store for Messaging administered objects. For more information, see the `TSJMSObjectsInterface`, an interface that defines a porting layer for looking up the Messaging administered objects. Vendors must either implement this porting package for their specific implementation or use the provided porting package and JNDI file system provider.

3. Start your Messaging implementation.

4. Add the following administered objects:

   Name | Type
   --- | ---
   `MY_QUEUE` | `javax.jms.Queue`
   `MY_QUEUE2` | `javax.jms.Queue`
   `testQ0` | `javax.jms.Queue`
   `testQ1` | `javax.jms.Queue`
   `testQ2` | `javax.jms.Queue`
   `testQueue2` | `javax.jms.Queue`
   `Q2` | `javax.jms.Queue`
   `MY_TOPIC` | `javax.jms.Topic`
   `MY_TOPIC2` | j`avax.jms.Topic`
   `testT0` | `javax.jms.Topic`
   `testT1` | j`avax.jms.Topic`
   `testT2` | `javax.jms.Topic`
   `MyConnectionFactory` | `javax.jms.ConnectionFactory`
   `MyQueueConnectionFactory` | `javax.jms.QueueConnectionFactory`
   `MyTopicConnectionFactory` | `javax.jms.TopicConnectionFactory`
   `DURABLE_SUB_CONNECTION_FACTORY` | `javax.jms.TopicConnectionFactory`

Note | `jms/DURABLE_SUB_CONNECTION_FACTORY` must support durable subscriptions and must be created with `clientID=cts`. The sections that follow explain how to automatically and manually create these administered objects using the Messaging 2.0 CI.

[automatic-configuration-and-startup-of-the-jms-ri]]

#### 4.1.3 Automatic Configuration and Startup of the Messaging CI

This section is optional.

You do not have to start up and configure the Messaging CI as part of the certification process. You may, however, want to do so to familiarize yourself with the testing process.

The steps in this section explain how to automatically handle the configuration and startup procedures, something you may want to do with your implementation, especially if you have want to test repeatedly. You can examine the provided scripts, then modify them for use with the implementaation under test. Section 4.1.4, "Manual Configuration and Startup of the Messaging CI," provides the manual steps for doing what the provided scripts do automatically.

Complete the following steps to automatically configure and start up the Eclipse OpenMQ 5.0 CI:

1. Set the following environment variables in your shell environment:

   - `JAVA_HOME` to the directory in which the Java SE 7 software has been installed

   - `IMQ_JAVAHOME` to the value of `JAVA_HOME`.
     This is needed for {TTechnologyRI} CI commands and scripts.

   - `TS_HOME` to the directory in which the Messaging TCK software has been installed

   - `JMS_HOME` to the directory in which your Messaging 2.0 implementation has been installed

   - `PATH` to include the following directories: `JAVA_HOME/bin`, `JMS_HOME/bin`, and `/bin``<TS_HOME>/tools/ant`

2. If you are using the CI Eclipse OpenMQ 5.0 on the Windows platform, edit the `<TS_HOME>/bin/ts.jte` file and add the drive letter to the `admin.pass.file` and `jndi.fs.dir` properties. The property settings for the Windows platform are as follows:

    admin.pass.file=C:/tmp/ripassword
    jndi.fs.dir=C:/tmp/ri_admin_objects

Edit the `<TS_HOME>/bin/xml/impl/ri/jndi.properties` file and add the drive letter to the `java.naming.provider.url` property. The property setting for the Windows platform is as follows:

    java.naming.provider.url=file:///C:/tmp/ri_admin_objects

1. Invoke `config.vi`, the Ant configuration script, to start and configure the Messaging CI.
   The Messaging TCK comes with a configuration XML file, which automates starting and stopping the Messaging service as well as creating and deleting all of the Messaging administered objects and Messaging users needed by the Messaging TCK. Use the following command to invoke the configuration XML file to start and configure the Messaging TCK.

    cd $TS_HOME/bin
    ant config.vi

When used with the Messaging 2.0 CI or the Eclipse OpenMQ 5.0 implementation, this target invokes the <`TS_HOME>/bin/xml/impl/ri/config.vi.xml` script, which starts the Messaging service and creates the Messaging administered objects and Messaging users needed by the Messaging TCK. In the `ts.jte` file, the Messaging 2.0 implementation property, `impl.vi`, needs to be set to `ri` and the `jms.classes` property needs to be set to `${ri.jars}` for the Messaging CI or Eclipse OpenMQ 5.0.
To automate the process of creating the Messaging administered obects and Messaging users for your Messaging implementation, provide your own Ant-based configuration file, name it `<TS_HOME>/bin/xml/impl/vi/config.vi.xml`, and set the `impl.vi` property to vi in your `ts.jte` file. When you execute the `ant config.vi` target, the script invokes and executes your script `<TS_HOME>/bin/xml/impl/vi/config.vi.xml`. 4. Invoke `clean.vi`, an Ant configuration script, to stop and unconfigure the Messaging CI.
The Messaging TCK comes with an XML configuration file that automates starting and stopping the Messaging service as well as creating and deleting all of the Messaging administered objects and Messaging users needed by the Messaging TCK. Use the following command to invoke the configuration XML file to stop and unconfigure the Messaging CI.

    cd $TS_HOME/bin
    ant clean.vi

If you are using the CI Eclipse GlassFisn 5.1 or Eclipse OpenMQ 5.0, this target invokes the `<TS_HOME>/bin/xml/impl/ri/config.vi.xml` script which stops the Messaging service and deletes all the Messaging administered objects and Messaging users needed by the Messaging TCK. In the `ts.jte` file, set the `impl.vi` property to `ri` and the `jms.classes` property to `${ri.jars}` for the Messaging CI or Eclipse OpenMQ 5.0.

#### 4.1.4 Manual Configuration and Startup of the Messaging CI

This section is optional. You do not have to start up and configure the Messaging CI as part of the certification process. You may, however, want to do so to familiarize yourself with the testing process.

The steps in this section explain how to manually configure and start up the Messaging CI, something you will do with your implementation. If you have to test repeatedly, you may want to examine the provided scripts that automate the configuration and startup procedures, then modify them for use with the implementaation under test. Section 4.1.3, "Automatic Configuration and Startup of the Messaging CI," provides the steps for using the provided scripts do perform these steps automatically.

Complete the following steps to manually configure and start up the Messaging CI:

1. Set the following environment variables in your shell environment:

   - `JAVA_HOME` to the directory in which the Java SE 7 software has been installed

   - `IMQ_JAVAHOME` to the value of `JAVA_HOME`.
     This is needed for Messaging 2.0 CI commands and scripts.

   - `TS_HOME` to the directory in which the Messaging TCK Version 2.0 software has been installed

   - `JMS_HOME` to the directory in which your Messaging 2.0 implementation has been installed

   - `PATH` to include the following directories: `JAVA_HOME/bin`, `JMS_HOME/bin`, and `<TS_HOME>/tools/ant/bin`

2. Use the following command to start the Eclipse OpenMQ 5.0 Broker Service:

       (UNIX) $JMS_HOME/bin/imqbrokerd

3. Use the following command to create the `j2ee` TCK user in the Eclipse OpenMQ 5.0 user repository:

       (UNIX) $JMS_HOME/bin/imqusermgr add -f -u j2ee -p j2ee -g admin

4. Use the following command to create the file system directory as the object store for the Eclipse OpenMQ 5.0 Administered Objects:

       (UNIX) mkdir /tmp/ri_admin_objects

   This directory must match the `jndi.fs.dir`. property setting in the `ts.jte` file and the `java.naming.provider.url` property in the `<TS_HOME>/bin/xml/impl/ri/jndi.properties` file.

5. Create the following Messaging administered objects:

   Name | Type
   --- | ---
   `MY_QUEUE` | `javax.jms.Queue`
   `MY_QUEUE2` | `javax.jms.Queue`
   `testQ0` | `javax.jms.Queue`
   `testQ1` | `javax.jms.Queue`
   `testQ2` | `javax.jms.Queue`
   `testQueue2` | `javax.jms.Queue`
   `Q2` | `javax.jms.Queue`
   `MY_TOPIC` | `javax.jms.Topic`
   `MY_TOPIC2` | j`avax.jms.Topic`
   `testT0` | `javax.jms.Topic`
   `testT1` | j`avax.jms.Topic`
   `testT2` | `javax.jms.Topic`
   `MyConnectionFactory` | `javax.jms.ConnectionFactory`
   `MyQueueConnectionFactory` | `javax.jms.QueueConnectionFactory`
   `MyTopicConnectionFactory` | `javax.jms.TopicConnectionFactory`
   `DURABLE_SUB_CONNECTION_FACTORY` | `javax.jms.TopicConnectionFactory`

Use the following commands to create the `MY_QUEUE` and `MY_TOPIC` JMS administered objects.

    $JMS_HOME/bin/imqobjmgr -f add -l MY_QUEUE -o imqDestinationName=MY_QUEUE -t q \
    -j java.naming.factory.initial=com.sun.jndi.fscontext.RefFSContextFactory \
    -j java.naming.provider.url=file:////tmp/ri_admin_objects

    $JMS_HOME/bin/imqobjmgr -f add -l MY_TOPIC -o imqDestinationName=MY_TOPIC -t t \
    -j java.naming.factory.initial=com.sun.jndi.fscontext.RefFSContextFactory \
    -j java.naming.provider.url=file:////tmp/ri_admin_objects

Use the following commands to create the `MyConnectionFactory`, `MyQueueConnectionFactory`, and `MyTopicConnectionFactory` JMS administered objects.

    $JMS_HOME/bin/imqobjmgr -f add -l MyConnectionFactory -t cf \
    -j java.naming.factory.initial=com.sun.jndi.fscontext.RefFSContextFactory \
    -j java.naming.provider.url=file:////tmp/ri_admin_objects

    $JMS_HOME/bin/imqobjmgr -f add -l MyQueueConnectionFactory -t qf \
    -j java.naming.factory.initial=com.sun.jndi.fscontext.RefFSContextFactory \
    -j java.naming.provider.url=file:////tmp/ri_admin_objects

    $JMS_HOME/bin/imqobjmgr -f add -l MyTopicConnectionFactory -t tf \
    -j java.naming.factory.initial=com.sun.jndi.fscontext.RefFSContextFactory \
    -j java.naming.provider.url=file:////tmp/ri_admin_objects

The `DURABLE_SUB_CONNECTION_FACTORY` administered object must support durable subscriptions and must be created with `clientID=cts`. Use the following command to create the `DURABLE_SUB_CONNECTION_FACTORY` administered object.

    $JMS_HOME/bin/imqobjmgr -f add -l DURABLE_SUB_CONNECTION_FACTORY \
    -o imqConfiguredClientID=cts -t tf \
    -j java.naming.factory.initial=com.sun.jndi.fscontext.RefFSContextFactory \
    -j java.naming.provider.url=file:////tmp/ri_admin_objects

### 4.2 Implementing the Messaging TCK Porting Package Interface

You may need to provide your own implementation of the `TSJMSObjectsInterface` porting package interface that is provided with the Messaging TCK.

Note that if you do implement this interface, you will also need to set the `porting.ts.jmsObjects.class.1` property in the `ts.jte` file for accessing your porting implementation class. The default for this property value is set to the implementation used by the Messaging Reference Implementation. You may need to set this value to point to your implementation of this interface. See Manual Configuration and Startup of the Messaging CI for information about modifying the `ts.jte` file.

The `TSJMSObjectsInterface` interface looks like this:

    public interface TSJMSObjectsInterface {
    public Queue getQueue(java.lang.String name)
            throws java.lang.Exception;
    public Topic getTopic(java.lang.String name)
            throws java.lang.Exception;
    public TopicConnectionFactory
            getTopicConnectionFactory(java.lang.String name)
    throws java.lang.Exception;
            public QueueConnectionFactory
    getQueueConnectionFactory(java.lang.String name)
            throws java.lang.Exception;
            public ConnectionFactory
    getConnectionFactory(java.lang.String name)
            throws java.lang.Exception;
    }

where:

- The `getQueue` method, which is used to get a Queue, accepts the name of the queue as an input parameter.

- The `getTopic` method, which is used to get a Topic, accepts the name of the topic as an input parameter.

- The `getTopicConnectFactory` method, which is used to get a `TopicConnectionFactory`, accepts the name of the `TopicConnectionFactory` as an input parameter.

- The `getQueueConnectionFactory` method, which is used to get a `QueueConnectionFactory`, accepts the name of the `QueueConnectionFactory` as an input parameter.

- The `getConnectionFactory` method, which is used to get a `ConnectionFactory`, accepts the name of the `ConnectionFactory` as an input parameter.

Make sure that you set the value of the `porting.ts.jmsObjects.class.1` property in the `ts.jte` file to point to your implementation of the `TSJMSObjectsInterface`. Refer to Manual Configuration and Startup of the Messaging CI for information about the list of administered objects you may need to manually create.

A sample implementation of the `TSJMSObjectsInterface` porting package, `SunRIJMSObjects.java`, is provided with the Messaging TCK and can be found in the `<TS_HOME>/src/com/sun/ts/lib/implementation/sun/jms`. directory.

### 4.3 Publishing the Test Applications

Not needed for the Messaging TCK.

### 4.4 Custom Configuration Handlers

Configuration handlers are used to configure and unconfigure a Messaging 2.0 implementation during the certification process. These are similar to deployment handlers but used for configuration. A configuration handler is an Ant build file that contains at least the required targets listed below:

- `config.vi` - to configure the vendor implementation

- `clean.vi` - to unconfigure the vendor implementation

These targets are called from the `<TS_HOME>/bin/build.xml` file and call down into the implementation-specific configuration handlers.

To provide your own configuration handler, create a config.vi.xml file with the necessary configuration steps for your implementation and place the file under the `<TS_HOME>/bin/xml/impl/<your_impl>` directory.

For more information, you may wish to view `<TS_HOME>/bin/xml/impl/glassfish/config.vi.xml`, the configuration file for Eclipse EE4J Jakarta EE 8 Compatible Implementation, Eclipse GlassFish.

### 4.5 Custom Deployment Handlers

Deployment handlers are used to deploy and undeploy the WAR files that contain the tests to be run during the certification process. A deployment handler is an Ant build file that contains at least the required targets listed in the table below.

The Messaging TCK provides these deployment handlers:

- `<TS_HOME>/bin/xml/impl/none/deploy.xml`

- `<TS_HOME>/bin/xml/impl/glassfish/deploy.xml`

- `<TS_HOME>/bin/xml/impl/tomcat/deploy.xml`

The `deploy.xml` files in each of these directories are used to control deployment to a specific container (no deployment, deployment to the Eclipse GlassFish Web container, deployment to the Tomcat Web container) denoted by the name of the directory in which each `deploy.xml` file resides. The primary `build.xml` file in the `<TS_HOME>/bin` directory has a target to invoke any of the required targets (`-deploy`, `-undeploy`, `-deploy.all`, `-undeploy.all`).

#### 4.5.1 To Create a Custom Deployment Handler

To deploy tests to another Messaging implementation, you must create a custom handler.

1. Create a new directory in the `<TS_HOME>/bin/xml/impl` directory tree. For example, create the `<TS_HOME>/bin/xml/impl/my_deployment_handler` directory. Replace my_deployment_handler with the value of the impl.vi property that you set in Step 5 of the configuration procedure described in Section 4.2, "Configuring Your Environment to Repackage and Run the TCK Against the Vendor Implementation".

2. Copy the deploy.xml file from the `<TS_HOME>/bin/xml/impl/none` directory to the directory that you created.

3. Modify the required targets in the `deploy.xml` file. This is what the `deploy.xml` file for the "none" deployment handler looks like.

       <project name="No-op Deployment" default="deploy">
           <!-- No-op deployment target -->
           <target name="-deploy">
               <echo message="No deploy target implemented for this deliverable"/>
           </target>
           <target name="-undeploy">
               <echo message="No undeploy target implemented for this deliverable"/>
           </target>
           <target name="-deploy.all">
               <echo message="No deploy target implemented for this deliverable"/>
           </target>
           <target name="-undeploy.all">
               <echo message="No undeploy target implemented for this deliverable"/>
           </target>
       </project>

   Although this example just echoes messages, it does include the four required Ant targets (`-deploy`, `-undeploy`, `-deploy.all`, `-undeploy.all`) that your custom `deploy.xml` file must contain. With this as your starting point, look at the required targets in the `deploy.xml` files in the Tomcat and Eclipse Glassfish directories for guidance as you create the same targets for the Web container in which you will run your implementation of Messaging.

The following Ant targets can be called from anywhere under the `<TS_HOME>/src` directory:

- `deploy`

- `undeploy`

- `deploy.all`

- `undeploy.all`

The `deploy.all` and `undeploy.all` targets can also be called from the `<TS_HOME>/bin` directory.

Note | The targets in the `deploy.xml` file are never called directly. They are called indirectly by the targets listed above.

### 4.6 Using the JavaTest Harness Software

There are two general ways to run the Messaging TCK test suite using the JavaTest harness software:

- Through the JavaTest GUI; if using this method, please continue on to Section 4.7, "Using the JavaTest Harness Configuration GUI."

- In JavaTest batch mode, from the command line in your shell environment; if using this method, please proceed directly to Chapter 5, "Executing Tests."

### 4.7 Using the JavaTest Harness Configuration GUI

You can use the JavaTest harness GUI to modify general test settings and to quickly get started with the default Messaging TCK test environment. This section covers the following topics:

- Configuration GUI Overview

- Starting the Configuration GUI

- To Configure the JavaTest Harness to Run the Messaging TCK Tests

- Modifying the Default Test Configuration

Note | It is only necessary to proceed with this section if you want to run the JavaTest harness in GUI mode. If you plan to run the JavaTest harness in command-line mode, skip the remainder of this chapter, and continue with Chapter 5, "Executing Tests."

#### 4.7.1 Configuration GUI Overview

In order for the JavaTest harness to execute the test suite, it requires information about how your computing environment is configured. The JavaTest harness requires two types of configuration information:

- Test environment: This is data used by the tests. For example, the path to the Java runtime, how to start the product being tested, network resources, and other information required by the tests in order to run. This information does not change frequently and usually stays constant from test run to test run.

- Test parameters: This is information used by the JavaTest harness to run the tests. Test parameters are values used by the JavaTest harness that determine which tests in the test suite are run, how the tests should be run, and where the test reports are stored. This information often changes from test run to test run.

The first time you run the JavaTest harness software, you are asked to specify the test suite and work directory that you want to use. (These parameters can be changed later from within the JavaTest harness GUI.)

Once the JavaTest harness GUI is displayed, whenever you choose Start, then Run Tests to begin a test run, the JavaTest harness determines whether all of the required configuration information has been supplied:

- If the test environment and parameters have been completely configured, the test run starts immediately.

- If any required configuration information is missing, the configuration editor displays a series of questions asking you the necessary information. This is called the configuration interview. When you have entered the configuration data, you are asked if you wish to proceed with running the test.

#### 4.7.2 Starting the Configuration GUI

Before you start the JavaTest harness software, you must have a valid test suite and Java SE 8 installed on your system.

The Messaging TCK includes an Ant script that is used to execute the JavaTest harness from the `<TS_HOME>` directory. Using this Ant script to start the JavaTest harness is part of the procedure described in Section 4.7.3, "To Configure the JavaTest Harness to Run the TCK Tests."

When you execute the JavaTest harness software for the first time, the JavaTest harness displays a Welcome dialog box that guides you through the initial startup configuration.

- If it is able to open a test suite, the JavaTest harness displays a Welcome to JavaTest dialog box that guides you through the process of either opening an existing work directory or creating a new work directory as described in the JavaTest online help.

- If the JavaTest harness is unable to open a test suite, it displays a Welcome to JavaTest dialog box that guides you through the process of opening both a test suite and a work directory as described in the JavaTest documentation.

After you specify a work directory, you can use the Test Manager to configure and run tests as described in Section 4.7.3, "To Configure the JavaTest Harness to Run the TCK Tests."

#### 4.7.3 To Configure the JavaTest Harness to Run the TCK Tests

The answers you give to some of the configuration interview questions are specific to your site. For example, the name of the host on which the JavaTest harness is running. Other configuration parameters can be set however you wish. For example, where you want test report files to be stored.

Note that you only need to complete all these steps the first time you start the JavaTest test harness. After you complete these steps, you can either run all of the tests by completing the steps in Section 5.1, "Starting JavaTest," or run a subset of the tests by completing the steps in Section 5.2, "Running a Subset of the Tests."

1. Change to the `<TS_HOME>/bin` directory and start the JavaTest test harness:
   `cd <TS_HOME>/bin`
   `ant gui`

2. From the File menu, click Open Quick Start Wizard.
   The Welcome screen displays.

3. Select Start a new test run, and then click Next.
   You are prompted to create a new configuration or use a configuration template.

4. Select Create a new configuration, and then click Next.
   You are prompted to select a test suite.

5. Accept the default suite (`<TS_HOME>/src`), and then click Next.
   You are prompted to specify a work directory to use to store your test results.

6. Type a work directory name or use the Browse button to select a work directory, and then click Next.
   You are prompted to start the configuration editor or start a test run. At this point, the Messaging TCK is configured to run the default test suite.

7. Deselect the Start the configuration editor option, and then click Finish.

8. Click Run Tests, then click Start.
   The JavaTest harness starts running the tests.

9. To reconfigure the JavaTest test harness, do one of the following:

   - Click Configuration, then click New Configuration.

   - Click Configuration, then click Change Configuration.

10. Click Report, and then click Create Report.

11. Specify the directory in which the JavaTest test harness will write the report, and then click OK.
    A report is created, and you are asked whether you want to view it.

12. Click Yes to view the report.

#### 4.7.4 Modifying the Default Test Configuration

The JavaTest GUI enables you to configure numerous test options. These options are divided into two general dialog box groups:

- Group 1: Available from the JavaTest Configure/Change Configuration submenus, the following options are displayed in a tabbed dialog box:

  - Tests to Run

  - Exclude List

  - Keywords

  - Prior Status

  - Test Environment

  - Concurrency

  - Timeout Factor

- Group 2: Available from the JavaTest Configure/Change Configuration/Other Values submenu, or by pressing `Ctrl+E`, the following options are displayed in a paged dialog box:

  - Environment Files

  - Test Environment

  - Specify Tests to Run

  - Specify an Exclude List

Note that there is some overlap between the functions in these two dialog boxes; for those functions use the dialog box that is most convenient for you. Please refer to the JavaTest Harness documentation or the online help for complete information about these various options.

Copyright © 2018, Oracle and/or its affiliates. All rights reserved.