This is Info file INSTALL, produced by Makeinfo-1.47 from the input file install1.texi. This file documents the installation of the GNU compiler. Copyright (C) 1988, 1989, 1992 Free Software Foundation, Inc. You may copy, distribute, and modify it freely as long as you preserve this copyright notice and permission notice. Installing GNU CC ****************** Here is the procedure for installing GNU CC on a Unix system. 1. If you have built GNU CC previously in the same directory for a different target machine, do `make distclean' to delete all files that might be invalid. 2. On a System V release 4 system, make sure `/usr/bin' precedes `/usr/ucb' in `PATH'. The `cc' command in `/usr/ucb' uses libraries which have bugs. 3. Specify the host and target machine configurations. You do this by running the file `configure' with appropriate arguments. If you are building a compiler to produce code for the machine it runs on, specify just one machine type. Use the `--target' option; the host type will default to be the same as the target. (For information on building a cross-compiler, see *Note Cross-Compiler::.) The command looks like this: configure --target=sparc-sun-sunos4.1 A configuration name may be canonical or it may be more or less abbreviated. A canonical configuration name has three parts, separated by dashes. It looks like this: `CPU-COMPANY-SYSTEM'. (The three parts may themselves contain dashes; `configure' can figure out which dashes serve which purpose.) For example, `m68k-sun-sunos4.1' specifies a Sun 3. You can also replace parts of the configuration by nicknames or aliases. For example, `sun3' stands for `m68k-sun', so `sun3-sunos4.1' is another way to specify a Sun 3. You can also use simply `sun3-sunos', since the version of SunOS is assumed by default to be version 4. `sun3-bsd' also works, since `configure' knows that the only BSD variant on a Sun 3 is SunOS. You can specify a version number after any of the system types, and some of the CPU types. In most cases, the version is irrelevant, and will be ignored. So you might as well specify the version if you know it. Here are the possible CPU types: a29k, arm, cN, hppa1.0, hppa1.1, i386, i860, i960, m68000, m68k, m88k, mips, ns32k, romp, rs6000, sparc, vax, we32k. Here are the recognized company names. As you can see, customary abbreviations are used rather than the longer official names. alliant, altos, apollo, att, convergent, convex, crds, dec, dg, encore, harris, hp, ibm, mips, motorola, ncr, next, ns, omron, sequent, sgi, sony, sun, tti, unicom. The company name is meaningful only to disambiguate when the rest of the information supplied is insufficient. You can omit it, writing just `CPU-SYSTEM', if it is not needed. For example, `vax-ultrix4.2' is equivalent to `vax-dec-ultrix4.2'. Here is a list of system types: bsd, sysv, mach, minix, genix, ultrix, vms, sco, isc, aix, sunos, hpux, unos, luna, dgux, newsos, osfrose, osf, dynix, aos, ctix. You can omit the system type; then `configure' guesses the operating system from the CPU and company. You can add a version number to the system type; this may or may not make a difference. For example, you can write `bsd4.3' or `bsd4.4' to distinguish versions of BSD. In practice, the version number is most needed for `sysv3' and `sysv4', which are often treated differently. If you specify an impossible combination such as `i860-dg-vms', then you may get an error message from `configure', or it may ignore part of the information and do the best it can with the rest. `configure' always prints the canonical name for the alternative that it used. Often a particular model of machine has a name. Many machine names are recognized as aliases for CPU/company combinations. Thus, the machine name `sun3', mentioned above, is an alias for `m68k-sun'. Sometimes we accept a company name as a machine name, when the name is popularly used for a particular machine. Here is a table of the known machine names: 3300, 3b1, 3bN, 7300, altos3068, altos, apollo68, att-7300, balance, convex-cN, crds, decstation-3100, decstation, delta, encore, fx2800, gmicro, hp7NN, hp8NN, hp9k2NN, hp9k3NN, hp9k7NN, hp9k8NN, iris4d, iris, isi68, m3230, magnum, merlin, miniframe, mmax, news-3600, news800, news, next, pbd, pc532, pmax, ps2, risc-news, rtpc, sun2, sun386i, sun386, sun3, sun4, symmetry, tower-32, tower. Remember that a machine name specifies both the cpu type and the company name. There are three additional options you can specify independently to describe variant hardware and software configurations. These are `--with-gnu-as', `--with-gnu-ld', and `--nfp'. `--with-gnu-as' On certain systems, you must specify whether you want GNU CC to work with the usual compilation tools or with the GNU compilation tools (including GAS). Use the `--with-gnu-as' argument when you run `configure', if you want to use the GNU tools. (Specify `--with-gnu-ld' as well, since on these systems GAS works only with the GNU linker.) The systems were this makes a difference are `i386-ANYTHING-sysv', `i860-ANYTHING-bsd', `m68k-hp-hpux', `m68k-sony-bsd', `m68k-altos-sysv', `m68000-hp-hpux', and `m68000-att-sysv'. On any other system, `--with-gnu-as' has no effect. `--with-gnu-ld' Specify the option `--with-gnu-ld' if you plan to use the GNU linker. This inhibits the installation of `collect2', a program which otherwise serves as a front-end for the system's linker on most configurations. `--nfp' On certain systems, you must specify whether the machine has a floating point unit. These systems are `m68k-sun-sunosN' and `m68k-isi-bsd'. On any other system, `--nfp' currently has no effect, though perhaps there are other systems where it could usefully make a difference. If you want to install your own homemade configuration files, you can use `local' as the company name to access them. If you use configuration `CPU-local', the entire configuration name is used to form the configuration file names. Thus, if you specify `m68k-local', then the files used are `m68k-local.md', `m68k-local.h', `m68k-local.c', `xm-m68k-local.h', `t-m68k-local', and `x-m68k-local'. Here is a list of configurations that have special treatment or special things you must know: `i386-*-sco' Compilation with RCC is recommended, but it produces lots of spurious warnings. They do not necessarily indicate that anything is wrong. `i386-sequent' Go to the Berkeley universe before compiling. In addition, you probably need to create a file named `string.h' containing just one line: `#include '. `m68000-att' AT&T 3b1, a.k.a. 7300 PC. Special procedures are needed to compile GNU CC with this machine's standard C compiler, due to bugs in that compiler. *Note 3b1 Install::. You can bootstrap it more easily with previous versions of GNU CC if you have them. `m68000-hp-bsd' HP 9000 series 200 running BSD. Note that the C compiler that comes with this system cannot compile GNU CC; contact `law@cs.utah.edu' to get binaries of GNU CC for bootstrapping. `m68k-altos' Altos 3068. You must use the GNU assembler, linker and debugger, with COFF-encapsulation. Also, you must fix a kernel bug. Details in the file `README.ALTOS'. `m68k-hp-hpux' HP 9000 series 300 or 400 running HP-UX. HP-UX version 8.0 has a bug in the assembler that prevents compilation of GNU CC. To fix it, get patch PHCO_0800 from HP. In addition, `--gas' does not currently work with this configuration. Changes in HP-UX have broken the library conversion tool and the linker. `m68k-sun' Sun 3. We do not provide a configuration file to use the Sun FPA by default, because programs that establish signal handlers for floating point traps inherently cannot work with the FPA. `m88k-svr3' Motorola m88k running the AT&T/Unisoft/Motorla V.3 reference port. These systems tend to use the Green Hills C, revision 1.8.5, as the standard C compiler. There are apparently bugs in this compiler that result in object files differences between stage 2 and stage 3. If this happens, make the stage 4 compiler and compare it to the stage 3 compiler. If the stage 3 and stage 4 object files are identical, this suggests a problem with the standard C compiler. It is best, however, to use an older version of GNU CC for bootstrapping. `m88k-dgux' Motorola m88k running DG/UX. To build native or cross compilers on DG/UX, you must first change to the 88open BCS software development environment. This is done by issuing this command: eval `sde-target m88kbcs` `mips-mips-bsd' MIPS machines running the MIPS operating system in BSD mode. It's possible that some old versions of the system lack the functions `memcpy', `memcmp', and `memset'. If your system lacks these, you must remove or undo the definition of `TARGET_MEM_FUNCTIONS' in `mips-bsd.h'. `mips-sony-sysv' Sony MIPS NEWS. This works in NEWSOS 5.0.1, but not in 5.0.2 (which uses ELF instead of COFF). Support for 5.0.2 will probably be provided soon by volunteers. `ns32k-encore' Encore ns32000 system. Encore systems are supported only under BSD. `ns32k-*-genix' National Semiconductor ns32000 system. Genix has bugs in `alloca' and `malloc'; you must get the compiled versions of these from GNU Emacs. `ns32k-sequent' Go to the Berkeley universe before compiling. In addition, you probably need to create a file named `string.h' containing just one line: `#include '. `ns32k-utek' UTEK ns32000 system ("merlin"). The C compiler that comes with this system cannot compile GNU CC; contact `tektronix!reed!mason' to get binaries of GNU CC for bootstrapping. `romp-*-aos' `romp-*-mach' The only operating systems supported for the IBM RT PC are AOS and MACH. GNU CC does not support AIX running on the RT. `rs6000-*-aix' Read the file `README.RS6000' for information on how to get a fix for a problem in the IBM assembler that prevents use of GNU CC. `vax-dec-ultrix' Don't try compiling with Vax C (`vcc'). It produces incorrect code in some cases (for example, when `alloca' is used). Meanwhile, compiling `cp-parse.c' with pcc does not work because of an internal table size limitation in that compiler. To avoid this problem, compile just the GNU C compiler first, and use it to recompile building all the languages that you want to run. `we32k-att-sysv' Don't use `-g' when compiling GNU CC. The system's linker seems to be unable to handle such a large program with debugging information. Here we spell out what files will be set up by `configure'. Normally you need not be concerned with these files. * A symbolic link named `config.h' is made to the top-level config file for the machine you plan to run the compiler on (*note The Configuration File: (gcc.info)Config.). This file is responsible for defining information about the host machine. It includes `tm.h'. The top-level config file is located in the subdirectory `config'. Its name is always `xm-SOMETHING.h'; usually `xm-MACHINE.h', but there are some exceptions. If your system does not support symbolic links, you might want to set up `config.h' to contain a `#include' command which refers to the appropriate file. * A symbolic link named `tconfig.h' is made to the top-level config file for your target machine. This is used for compiling certain programs to run on that machine. * A symbolic link named `tm.h' is made to the machine-description macro file for your target machine. It should be in the subdirectory `config' and its name is often `MACHINE.h'. * A symbolic link named `md' will be made to the machine description pattern file. It should be in the `config' subdirectory and its name should be `MACHINE.md'; but MACHINE is often not the same as the name used in the `tm.h' file because the `md' files are more general. * A symbolic link named `aux-output.c' will be made to the output subroutine file for your machine. It should be in the `config' subdirectory and its name should be `MACHINE.c'. * The command file `configure' also constructs `Makefile' by adding some text to the template file `Makefile.in'. The additional text comes from files in the `config' directory, named `t-TARGET' and `h-HOST'. If these files do not exist, it means nothing needs to be added for a given target or host. 4. Make sure the Bison parser generator is installed. (This is unnecessary if the Bison output files `c-parse.c' and `cexp.c' are more recent than `c-parse.y' and `cexp.y' and you do not plan to change the `.y' files.) Bison versions older than Sept 8, 1988 will produce incorrect output for `c-parse.c'. 5. Build the compiler. Just type `make LANGUAGES=c' in the compiler directory. `LANGUAGES=c' specifies that only the C compiler should be compiled. The makefile normally builds compilers for all the supported languages; currently, C, C++ and Objective C. However, C is the only language that is sure to work when you build with other non-GNU C compilers. In addition, building anything but C at this stage is a waste of time. In general, you can specify the languages to build by typing the argument `LANGUAGES="LIST"', where LIST is one or more words from the list `c', `c++', and `objective-c'. Ignore any warnings you may see about "statement not reached" in `insn-emit.c'; they are normal. Any other compilation errors may represent bugs in the port to your machine or operating system, and should be investigated and reported. Some commercial compilers fail to compile GNU CC because they have bugs or limitations. For example, the Microsoft compiler is said to run out of macro space. Some Ultrix compilers run out of expression space; then you need to break up the statement where the problem happens. If you are building with a previous GNU C compiler, do not use `CC=gcc' on the make command or by editing the Makefile. Instead, use a full pathname to specify the compiler, such as `CC=/usr/local/bin/gcc'. This is because make might execute the `gcc' in the current directory before all of the compiler components have been built. 6. If you are using COFF-encapsulation, you must convert `libgcc.a' to a GNU-format library at this point. See the file `README.ENCAP' in the directory containing the GNU binary file utilities, for directions. 7. If you are building a cross-compiler, stop here. *Note Cross-Compiler::. 8. Move the first-stage object files and executables into a subdirectory with this command: make stage1 The files are moved into a subdirectory named `stage1'. Once installation is complete, you may wish to delete these files with `rm -r stage1'. 9. Recompile the compiler with itself, with this command: make CC="stage1/gcc -Bstage1/" CFLAGS="-g -O" This is called making the stage 2 compiler. The command shown above builds compilers for all the supported languages. If you don't want them all, you can specify the languages to build by typing the argument `LANGUAGES="LIST"'. LIST should contain one or more words from the list `c', `c++', `objective-c', and `proto'. Separate the words with spaces. `proto' stands for the programs `protoize' and `unprotoize'; they are not a separate language, but you use `LANGUAGES' to enable or disable their installation. If you are going to build the stage 3 compiler, then you might want to build only the C language in stage 2. Once you have built the stage 2 compiler, if you are short of disk space, you can delete the subdirectory `stage1'. On a 68000 or 68020 system lacking floating point hardware, unless you have selected a `tm.h' file that expects by default that there is no such hardware, do this instead: make CC="stage1/gcc -Bstage1/" CFLAGS="-g -O -msoft-float" 10. If you wish to test the compiler by compiling it with itself one more time, do this: make stage2 make CC="stage2/gcc -Bstage2/" CFLAGS="-g -O" This is called making the stage 3 compiler. Aside from the `-B' option, the options should be the same as when you made the stage 2 compiler. The command shown above builds compilers for all the supported languages. If you don't want them all, you can specify the languages to build by typing the argument `LANGUAGES="LIST"', as described above. Then compare the latest object files with the stage 2 object files--they ought to be identical, unless they contain time stamps. You can compare the files, disregarding the time stamps if any, like this: make compare This will mention any object files that differ between stage 2 and stage 3. Any difference, no matter how innocuous, indicates that the stage 2 compiler has compiled GNU CC incorrectly, and is therefore a potentially serious bug which you should investigate and report. If your system does not put time stamps in the object files, then this is a faster way to compare them (using the Bourne shell): for file in *.o; do cmp $file stage2/$file done If you have built the compiler with the `-mno-mips-tfile' option on MIPS machines, you will not be able to compare the files. 11. Install the compiler driver, the compiler's passes and run-time support. You can use the following command: make CC="stage2/gcc -Bstage2/" CFLAGS="-g -O" install LANGUAGES="LIST" (Use the same value for `CC', `CFLAGS' and `LANGUAGES' that you used when compiling the files that are being installed. One reason this is necessary is that some versions of Make have bugs and recompile files gratuitously when you do this step. If you use the same variable values, those files will be recompiled properly. This copies the files `cc1', `cpp' and `libgcc.a' to files `cc1', `cpp' and `libgcc.a' in directory `/usr/local/lib/gcc-lib/TARGET/VERSION', which is where the compiler driver program looks for them. Here TARGET is the target machine type specified when you ran `configure', and VERSION is the version number of GNU CC. This naming scheme permits various versions and/or cross-compilers to coexist. It also copies the driver program `gcc' into the directory `/usr/local/bin', so that it appears in typical execution search paths. On some systems, this command will cause recompilation of some files. This is usually due to bugs in `make'. You should either ignore this problem, or use GNU Make. *Warning: there is a bug in `alloca' in the Sun library. To avoid this bug, be sure to install the executables of GNU CC that were compiled by GNU CC. (That is, the executables from stage 2 or 3, not stage 1.) They use `alloca' as a built-in function and never the one in the library.* (It is usually better to install GNU CC executables from stage 2 or 3, since they usually run faster than the ones compiled with some other compiler.) 12. Correct errors in the header files on your machine. Various system header files often contain constructs which are incompatible with ANSI C, and they will not work when you compile programs with GNU CC. This behavior consists of substituting for macro argument names when they appear inside of character constants. The most common offender is `ioctl.h'. You can overcome this problem when you compile by specifying the `-traditional' option. Alternatively, on Sun systems and 4.3BSD at least, you can correct the include files by running the shell script `fixincludes'. This installs modified, corrected copies of the files `ioctl.h', `ttychars.h' and many others, in a special directory where only GNU CC will normally look for them. This script will work on various systems because it chooses the files by searching all the system headers for the problem cases that we know about. Use the following command to do this: make install-fixincludes If you selected a different directory for GNU CC installation when you installed it, by specifying the Make variable `prefix' or `libdir', specify it the same way in this command. Note that some systems are starting to come with ANSI C system header files. On these systems, don't run `fixincludes'; it may not work, and is certainly not necessary. If you cannot install the compiler's passes and run-time support in `/usr/local/lib', you can alternatively use the `-B' option to specify a prefix by which they may be found. The compiler concatenates the prefix with the names `cpp', `cc1' and `libgcc.a'. Thus, you can put the files in a directory `/usr/foo/gcc' and specify `-B/usr/foo/gcc/' when you run GNU CC. Also, you can specify an alternative default directory for these files by setting the Make variable `libdir' when you make GNU CC. Compilation in a Separate Directory ==================================== If you wish to build the object files and executables in a directory other than the one containing the source files, here is what you must do differently: 1. Make sure you have a version of Make that supports the `VPATH' feature. (GNU Make supports it, as do Make versions on most BSD systems.) 2. If you have ever run `configure' in the source directory, you must undo the configuration. Do this by running: make distclean 3. Go to the directory in which you want to build the compiler before running `configure': mkdir gcc-sun3 cd gcc-sun3 On systems that do not support symbolic links, this directory must be on the same file system as the source code directory. 4. Specify where to find `configure' when you run it: ../gcc/configure ... This also tells `configure' where to find the compiler sources; `configure' takes the directory from the file name that was used to invoke it. But if you want to be sure, you can specify the source directory with the `--srcdir' option, like this: ../gcc/configure --srcdir=../gcc sun3 The directory you specify with `--srcdir' need not be the same as the one that `configure' is found in. Now, you can run `make' in that directory. You need not repeat the configuration steps shown above, when ordinary source files change. You must, however, run `configure' again when the configuration files change, if your system does not support symbolic links. Building and Installing a Cross-Compiler ========================================= GNU CC can function as a cross-compiler for many machines, but not all. * Cross-compilers for the Mips as target do not work because the auxiliary programs `mips-tdump.c' and `mips-tfile.c' can't be compiled on anything but a Mips. * Cross-compilers to or from the Vax probably don't work completely because the Vax uses an incompatible floating point format (not IEEE format). Since GNU CC generates assembler code, you probably need a cross-assembler that GNU CC can run, in order to produce object files. If you want to link on other than the target machine, you need a cross-linker as well. You also need header files and libraries suitable for the target machine that you can install on the host machine. To build GNU CC as a cross-compiler, you start out by running `configure'. You must specify two different configureations, the host and the target. Use the `--host=HOST' option for the host and `--target=TARGET' to specify the target type. For example, here is how to configure for a cross-compiler that runs on a hypothetical Intel 386 system and produces code for an HP 68030 system running BSD: configure --target=m68k-hp-bsd4.3 --host=i386-bozotheclone-bsd4.3 Next you should install the cross-assembler and cross-linker (and `ar' and `ranlib'). Put them in the directory `/usr/local/TARGET'. The installation of GNU CC will find them there and copy or link them to the proper place to find them when you run the cross-compiler later. If you want to install any additional libraries to use with the cross-compiler, put them in the directory `/usr/local/TARGET/lib'; all files in that subdirectory will be installed in the proper place when you install the cross-compiler. Likewise, put the header files for the target machine in `/usr/local/TARGET/include'. Then you can proceed just as for compiling a single-machine compiler through the step of building stage 1. When you are using a cross-compiler configuration, building stage 1 does not compile all of GNU CC. This is because one part of building, the compilation of `libgcc2.c', requires use of the cross-compiler. However, when you type `make install' to install the bulk of the cross-compiler, that will also compile `libgcc2.c' and install the resulting `libgcc.a'. You will find it necessary to produce a substitute for `libgcc1.a'. Normally this file is compiled with the "native compiler" for the target machine; compiling it with GNU CC does not work. But compiling it with the host machine's compiler also doesn't work--that produces a file that would run on the host, and you need it to run on the target. We can't give you any automatic way to produce this substitute. For some targets, the subroutines in `libgcc1.c' are not actually used. You need not provide the ones that won't be used. The ones that most commonly are used are the multiplication, division and remainder routines--many RISC machines rely on the library for this. One way to make them work is to define the appropriate `perform_...' macros for the subroutines that you need. If these definitions do not use the C arithmetic operators that they are meant to implement, you might be able to compile them with the cross-compiler you have just built. Do not try to build stage 2 for a cross-compiler. It doesn't work to rebuild GNU CC as a cross-compiler using the cross-compiler, because that would produce a program that runs on the target machine, not on the host. For example, if you compile a 386-to-68030 cross-compiler with itself, the result will not be right either for the 386 (because it was compiled into 68030 code) or for the 68030 (because it was configured for a 386 as the host). If you want to compile GNU CC into 68030 code, whether you compile it on a 68030 or with a cross-compiler on a 386, you must specify a 68030 as the host when you configure it. Installing GNU CC on the HP Precision Architecture =================================================== There are two variants of this CPU, called 1.0 and 1.1, which have different machine descriptions. You must use the right one for your machine. All 7NN machines and 8N7 machines use 1.1, while all other 8NN machines use 1.0. The easiest way to handle this problem is to use `configure hpNNN' or `configure hpNNN-hpux', where NNN is the model number of the machine. Then `configure' will figure out if the machine is a 1.0 or 1.1. Use `uname -a' to find out the model number of your machine. `-g' does not work on HP-UX, since that system uses a peculiar debugging format which GNU CC does not know about. There is a preliminary version available of some modified GNU tools including the GDB debugger which do work with GNU CC for debugging. You can get them by anonymous ftp from `mancos.cs.utah.edu' in the `dist' subdirectory. You would need to install GAS in the file /usr/local/lib/gcc-lib/CONFIGURATION/GCCVERSION/as where CONFIGURATION is the configuration name (perhaps `hpNNN-hpux') and GCCVERSION is the GNU CC version number. If you do this, delete the line #undef DBX_DEBUGGING_INFO from `tm.h' before you build GNU CC, to enable generation of debugging information. Installing GNU CC on the Sun ============================= Make sure the environment variable `FLOAT_OPTION' is not set when you compile `libgcc.a'. If this option were set to `f68881' when `libgcc.a' is compiled, the resulting code would demand to be linked with a special startup file and would not link properly without special pains. There is a bug in `alloca' in certain versions of the Sun library. To avoid this bug, install the binaries of GNU CC that were compiled by GNU CC. They use `alloca' as a built-in function and never the one in the library. Some versions of the Sun compiler crash when compiling GNU CC. The problem is a segmentation fault in cpp. This problem seems to be due to the bulk of data in the environment variables. You may be able to avoid it by using the following command to compile GNU CC with Sun CC: make CC="TERMCAP=x OBJS=x LIBFUNCS=x STAGESTUFF=x cc" Installing GNU CC on the 3b1 ============================= Installing GNU CC on the 3b1 is difficult if you do not already have GNU CC running, due to bugs in the installed C compiler. However, the following procedure might work. We are unable to test it. 1. Comment out the `#include "config.h"' line on line 37 of `cccp.c' and do `make cpp'. This makes a preliminary version of GNU cpp. 2. Save the old `/lib/cpp' and copy the preliminary GNU cpp to that file name. 3. Undo your change in `cccp.c', or reinstall the original version, and do `make cpp' again. 4. Copy this final version of GNU cpp into `/lib/cpp'. 5. Replace every occurrence of `obstack_free' in the file `tree.c' with `_obstack_free'. 6. Run `make' to get the first-stage GNU CC. 7. Reinstall the original version of `/lib/cpp'. 8. Now you can compile GNU CC with itself and install it in the normal fashion. Installing GNU CC on Unos ========================== Use `configure unos' for building on Unos. The Unos assembler is named `casm' instead of `as'. For some strange reason linking `/bin/as' to `/bin/casm' changes the behavior, and does not work. So, when installing GNU CC, you should install the following script as `as' in the subdirectory where the passes of GCC are installed: #!/bin/sh casm $* The default Unos library is named `libunos.a' instead of `libc.a'. To allow GNU CC to function, either change all references to `-lc' in `gcc.c' to `-lunos' or link `/lib/libc.a' to `/lib/libunos.a'. When compiling GNU CC with the standard compiler, to overcome bugs in the support of `alloca', do not use `-O' when making stage 2. Then use the stage 2 compiler with `-O' to make the stage 3 compiler. This compiler will have the same characteristics as the usual stage 2 compiler on other systems. Use it to make a stage 4 compiler and compare that with stage 3 to verify proper compilation. (Perhaps simply defining `ALLOCA' in `x-crds' as described in the comments there will make the above paragraph superfluous. Please inform us of whether this works.) Unos uses memory segmentation instead of demand paging, so you will need a lot of memory. 5 Mb is barely enough if no other tasks are running. If linking `cc1' fails, try putting the object files into a library and linking from that library. Installing GNU CC on VMS ========================= The VMS version of GNU CC is distributed in a backup saveset containing both source code and precompiled binaries. To install the `gcc' command so you can use the compiler easily, in the same manner as you use the VMS C compiler, you must install the VMS CLD file for GNU CC as follows: 1. Define the VMS logical names `GNU_CC' and `GNU_CC_INCLUDE' to point to the directories where the GNU CC executables (`gcc-cpp', `gcc-cc1', etc.) and the C include files are kept. This should be done with the commands: $ assign /system /translation=concealed - disk:[gcc.] gnu_cc $ assign /system /translation=concealed - disk:[gcc.include.] gnu_cc_include with the appropriate disk and directory names. These commands can be placed in your system startup file so they will be executed whenever the machine is rebooted. You may, if you choose, do this via the `GCC_INSTALL.COM' script in the `[GCC]' directory. 2. Install the `GCC' command with the command line: $ set command /table=sys$common:[syslib]dcltables - /output=sys$common:[syslib]dcltables gnu_cc:[000000]gcc $ install replace sys$common:[syslib]dcltables 3. To install the help file, do the following: $ lib/help sys$library:helplib.hlb gcc.hlp Now you can invoke the compiler with a command like `gcc /verbose file.c', which is equivalent to the command `gcc -v -c file.c' in Unix. If you wish to use GNU C++ you must first install GNU CC, and then perform the following steps: 1. Define the VMS logical name `GNU_GXX_INCLUDE' to point to the directory where the preprocessor will search for the C++ header files. This can be done with the command: $ assign /system /translation=concealed - disk:[gcc.gxx_include.] gnu_gxx_include with the appropriate disk and directory name. If you are going to be using libg++, this is where the libg++ install procedure will install the libg++ header files. 2. Obtain the file `gcc-cc1plus.exe', and place this in the same directory that `gcc-cc1.exe' is kept. The GNU C++ compiler can be invoked with a command like `gcc /plus /verbose file.cc', which is equivalent to the command `g++ -v -c file.cc' in Unix. We try to put corresponding binaries and sources on the VMS distribution tape. But sometimes the binaries will be from an older version that the sources, because we don't always have time to update them. (Use the `/version' option to determine the version number of the binaries and compare it with the source file `version.c' to tell whether this is so.) In this case, you should use the binaries you get to recompile the sources. If you must recompile, here is how: 1. Copy the file `vms.h' to `tm.h', `xm-vms.h' to `config.h', `vax.md' to `md.' and `vax.c' to `aux-output.c'. The files to be copied are found in the subdirectory named `config'; they should be copied to the main directory of GNU CC. If you wish, you may use the command file `config-gcc.com' to perform these steps for you. 2. Setup the logical names and command tables as defined above. In addition, define the VMS logical name `GNU_BISON' to point at the to the directories where the Bison executable is kept. This should be done with the command: $ assign /system /translation=concealed - disk:[bison.] gnu_bison You may, if you choose, use the `INSTALL_BISON.COM' script in the `[BISON]' directory. 3. Install the `BISON' command with the command line: $ set command /table=sys$common:[syslib]dcltables - /output=sys$common:[syslib]dcltables - gnu_bison:[000000]bison $ install replace sys$common:[syslib]dcltables 4. Type `@make-gcc' to recompile everything (alternatively, you may submit the file `make-gcc.com' to a batch queue). If you wish to build the GNU C++ compiler as well as the GNU CC compiler, you must first edit `make-gcc.com' and follow the instructions that appear in the comments. 5. In order to use GCC, you need a library of functions which GCC compiled code will call to perform certain tasks, and these functions are defined in the file `libgcc2.c'. To compile this you should use the command procedure `make-l2.com', which will generate the library `libgcc2.olb'. `libgcc2.olb' should be built using the compiler built from the same distribution that `libgcc2.c' came from, and `make-gcc.com' will automatically do all of this for you. To install the library, use the following commands: $ lib gnu_cc:[000000]gcclib/delete=(new,eprintf) $ lib libgcc2/extract=*/output=libgcc2.obj $ lib gnu_cc:[000000]gcclib libgcc2.obj The first command simply removes old modules that will be replaced with modules from libgcc2. If the VMS librarian complains about those modules not being present, simply ignore the message and continue on with the next command. Whenever you update the compiler on your system, you should also update the library with the above procedure. You may wish to build GCC in such a way that no files are written to the directory where the source files reside. An example would be the when the source files are on a read-only disk. In these cases, execute the following DCL commands (substituting your actual path names): $ assign dua0:[gcc.build_dir.]tran=conc, - dua1:[gcc.source_dir.]/tran=conc gcc_build $ set default gcc_build:[000000] where `dua1:[gcc.source_dir.]' contains the source code, and `dua0:[gcc.build_dir.]' is meant to contain all of the generated object files and executables. Once you have done this, you can proceed building GCC as described above. (Keep in mind that `gcc_build' is a rooted logical name, and thus the device names in each element of the search list must be an actual physical device name rather than another rooted logical name). *If you are building GNU CC with a previous version of GNU CC, you also should check to see that you have the newest version of the assembler*. In particular, GNU CC version 2 treats global constant variables slightly differently from GNU CC version 1, and GAS version 1.38.1 does not have the patches required to work with GCC version 2. If you use GAS 1.38.1, then `extern const' variables will not have the read-only bit set, and the linker will generate warning messages about mismatched psect attributes for these variables. These warning messages are merely a nuisance, and can safely be ignored. If you are compiling with a version of GNU CC older than 1.33, specify `/DEFINE=("inline=")' as an option in all the compilations. This requires editing all the `gcc' commands in `make-cc1.com'. (The older versions had problems supporting `inline'.) Once you have a working 1.33 or newer GNU CC, you can change this file back. Under previous versions of GNU CC, the generated code would occasionally give strange results when linked to the sharable `VAXCRTL' library. Now this should work. Even with this version, however, GNU CC itself should not be linked to the sharable `VAXCRTL'. The `qsort' routine supplied with `VAXCRTL' has a bug which can cause a compiler crash. Similarly, the preprocessor should not be linked to the sharable `VAXCRTL'. The `strncat' routine supplied with `VAXCRTL' has a bug which can cause the preprocessor to go into an infinite loop. If you attempt to link to the sharable `VAXCRTL', the VMS linker will strongly resist any effort to force it to use the `qsort' and `strncat' routines from `gcclib'. Until the bugs in `VAXCRTL' have been fixed, linking any of the compiler components to the sharable VAXCRTL is not recommended. (These routines can be bypassed by placing duplicate copies of `qsort' and `strncat' in `gcclib' under different names, and patching the compiler sources to use these routines). Both of the bugs in `VAXCRTL' are still present in VMS version 5.4-1, which is the most recent version as of this writing. The executables that are generated by `make-cc1.com' and `make-cccp.com' use the nonshared version of `VAXCRTL' (and thus use the `qsort' and `strncat' routines from `gcclib.olb').