/*
 * Logitech Bus Mouse Driver for Linux
 * by James Banks
 *
 * Heavily modified by David Giller
 *   changed from queue- to counter- driven
 *   hacked out a (probably incorrect) mouse_select
 *
 * Modified again by Nathan Laredo to interface with
 *   0.96c-pl1 IRQ handling changes (13JUL92)
 *   didn't bother touching select code.
 *
 * Modified the select() code blindly to conform to the VFS
 *   requirements. 92.07.14 - Linus. Somebody should test it out.
 *
 * Modified by Johan Myreen to make room for other mice (9AUG92)
 *   removed assignment chr_fops[10] = &mouse_fops; see mouse.c
 *   renamed mouse_fops => bus_mouse_fops, made bus_mouse_fops public.
 *   renamed this file mouse.c => busmouse.c
 */

#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/busmouse.h>
#include <linux/tty.h>
#include <linux/signal.h>
#include <linux/errno.h>

#include <asm/io.h>
#include <asm/segment.h>
#include <asm/system.h>
#include <asm/irq.h>

static struct mouse_status mouse;
static int mouse_irq = MOUSE_IRQ;

void bmouse_setup(char *str, int *ints)
{
	if (ints[0] > 0)
		mouse_irq=ints[1];
}

static void mouse_interrupt(int unused)
{
	char dx, dy, buttons;

	MSE_INT_OFF();
	outb(MSE_READ_X_LOW, MSE_CONTROL_PORT);
	dx = (inb(MSE_DATA_PORT) & 0xf);
	outb(MSE_READ_X_HIGH, MSE_CONTROL_PORT);
	dx |= (inb(MSE_DATA_PORT) & 0xf) << 4;
	outb(MSE_READ_Y_LOW, MSE_CONTROL_PORT );
	dy = (inb(MSE_DATA_PORT) & 0xf);
	outb(MSE_READ_Y_HIGH, MSE_CONTROL_PORT);
	buttons = inb(MSE_DATA_PORT);
	dy |= (buttons & 0xf) << 4;
	buttons = ((buttons >> 5) & 0x07);
	if (dx != 0 || dy != 0 || buttons != mouse.buttons) {
	  mouse.buttons = buttons;
	  mouse.dx += dx;
	  mouse.dy += dy;
	  mouse.ready = 1;
	  wake_up_interruptible(&mouse.wait);
	}
	MSE_INT_ON();
}

static void release_mouse(struct inode * inode, struct file * file)
{
	MSE_INT_OFF();
	mouse.active = 0;
	mouse.ready = 0;
	free_irq(mouse_irq);
}

static int open_mouse(struct inode * inode, struct file * file)
{
	if (!mouse.present)
		return -EINVAL;
	if (mouse.active)
		return -EBUSY;
	mouse.active = 1;
	mouse.ready = 0;
	mouse.dx = 0;
	mouse.dy = 0;
	mouse.buttons = 0x87;
	if (request_irq(mouse_irq, mouse_interrupt)) {
		mouse.active = 0;
		return -EBUSY;
	}
	MSE_INT_ON();
	return 0;
}


static int write_mouse(struct inode * inode, struct file * file, char * buffer, int count)
{
	return -EINVAL;
}

static int read_mouse(struct inode * inode, struct file * file, char * buffer, int count)
{
	int i;

	if (count < 3)
		return -EINVAL;
	if (!mouse.ready)
		return -EAGAIN;
	MSE_INT_OFF();
	put_fs_byte(mouse.buttons | 0x80, buffer);
	if (mouse.dx < -127)
		mouse.dx = -127;
	if (mouse.dx > 127)
		mouse.dx =  127;
	put_fs_byte((char)mouse.dx, buffer + 1);
	if (mouse.dy < -127)
		mouse.dy = -127;
	if (mouse.dy > 127)
		mouse.dy =  127;
	put_fs_byte((char) -mouse.dy, buffer + 2);
	for (i = 3; i < count; i++)
		put_fs_byte(0x00, buffer + i);
	mouse.dx = 0;
	mouse.dy = 0;
	mouse.ready = 0;
	MSE_INT_ON();
	return i;
}

static int mouse_select(struct inode *inode, struct file *file, int sel_type, select_table * wait)
{
	if (sel_type != SEL_IN)
		return 0;
	if (mouse.ready)
		return 1;
	select_wait(&mouse.wait, wait);
	return 0;
}

struct file_operations bus_mouse_fops = {
	NULL,		/* mouse_seek */
	read_mouse,
	write_mouse,
	NULL, 		/* mouse_readdir */
	mouse_select, 	/* mouse_select */
	NULL, 		/* mouse_ioctl */
	NULL,		/* mouse_mmap */
	open_mouse,
	release_mouse,
};

unsigned long bus_mouse_init(unsigned long kmem_start)
{
	int i;

	outb(MSE_CONFIG_BYTE, MSE_CONFIG_PORT);
	outb(MSE_SIGNATURE_BYTE, MSE_SIGNATURE_PORT);
	for (i = 0; i < 100000; i++)
		/* busy loop */;
	if (inb(MSE_SIGNATURE_PORT) != MSE_SIGNATURE_BYTE) {
		mouse.present = 0;
		return kmem_start;
	}
	outb(MSE_DEFAULT_MODE, MSE_CONFIG_PORT);
	MSE_INT_OFF();
	mouse.present = 1;
	mouse.active = 0;
	mouse.ready = 0;
	mouse.buttons = 0x87;
	mouse.dx = 0;
	mouse.dy = 0;
	mouse.wait = NULL;
	printk("Logitech Bus mouse detected and installed.\n");
	return kmem_start;
}