Package: ahcpd
Version: 0.53-3
Depends: libc, ip, librt
License: MIT
Section: net
Architecture: mips_mips32
Installed-Size: 22851
Filename: ahcpd_0.53-3_mips_mips32.ipk
Size: 23557
SHA256sum: 3aaf6d08c54f3885fdba3474b01294f61889d33e9060674a6169c9cd95d1990c
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2023.3-1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
Architecture: mips_mips32
Installed-Size: 26692
Filename: alfred_2023.3-1_mips_mips32.ipk
Size: 27554
SHA256sum: 74c99c81a64cbc69c2249e6cfc13dd4f36c09def1f4cbb48abf1fdbb6b1c1942
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-1
Depends: libc, librt
Section: net
Architecture: mips_mips32
Installed-Size: 3951
Filename: babel-pinger_0.1-1_mips_mips32.ipk
Size: 4603
SHA256sum: b3c58f27ab9da671df9d3d2868e7c6a00ce744ca3684d26286cdb9e46d99246c
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-1
Depends: libc, libubus20231128, libubox202312041
License: MIT
Section: net
Architecture: mips_mips32
Installed-Size: 63480
Filename: babeld_1.13.1-1_mips_mips32.ipk
Size: 64450
SHA256sum: 5f5d6ceff1fe81b1d16ed094944c6d8ca3c27c1bffc44c18b52a96ffba4c73e0
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2023.3-1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
Architecture: mips_mips32
Installed-Size: 41205
Filename: batctl-default_2023.3-1_mips_mips32.ipk
Size: 41872
SHA256sum: 9fe2d8646f8fb379d2abe1c60330bd1afbb03fd0516c3eb8445b5a94fcfcb789
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2023.3 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2023.3-1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
Architecture: mips_mips32
Installed-Size: 48810
Filename: batctl-full_2023.3-1_mips_mips32.ipk
Size: 49335
SHA256sum: 587c77a209eb59310bcfd72b2d2718833f7c6b7038f5995d9379d2343f8487b1
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2023.3 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2023.3-1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
Architecture: mips_mips32
Installed-Size: 13539
Filename: batctl-tiny_2023.3-1_mips_mips32.ipk
Size: 14459
SHA256sum: a13bbb247e874dc23f6934ca84376a892dd64c7889d01110fb59d63a02efb18b
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2023.3 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 39305
Filename: batmand_1440-1_mips_mips32.ipk
Size: 39879
SHA256sum: 7f2f0248bea4a8e80c1ca5e33271c304f4df5dfe0ed3dbddd0278261261ec376
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.14-1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 395878
Filename: bird2_2.14-1_mips_mips32.ipk
Size: 394612
SHA256sum: 3b3a1753248884710c0057890b035906c529d7008823a2e7f0d3d9beb8ab4c8e
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.14-1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 8946
Filename: bird2c_2.14-1_mips_mips32.ipk
Size: 9886
SHA256sum: 5a6dbaadbab604d595d7aabafb2656d9a067109bf0e1adef857362d432ed6c05
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.14-1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 7703
Filename: bird2cl_2.14-1_mips_mips32.ipk
Size: 8587
SHA256sum: 5d89b88180cb4d56ee4fbb04f30235edbcbc14a3af5cb5a54eb66d91053a8a90
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: 7.1.1-5
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 4021
Filename: bmx7-iwinfo_7.1.1-5_mips_mips32.ipk
Size: 4646
SHA256sum: 4eb9ba97c3917006eaf323ba67d1700b5d2503a3814a4172ddd54268d441aa71
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: 7.1.1-5
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 7986
Filename: bmx7-json_7.1.1-5_mips_mips32.ipk
Size: 8663
SHA256sum: a2f635f0d2b8c88a12fc04eeff9cbceb62343de75a772f2564dd4d9a6f3219ee
Description:  json plugin based on json-c

Package: bmx7-sms
Version: 7.1.1-5
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 5561
Filename: bmx7-sms_7.1.1-5_mips_mips32.ipk
Size: 6133
SHA256sum: f2922212ac71f8ea0af7bb01c14a0291c4157f3f9dd89a790be2fd13d7fa6414
Description:  sms plugin

Package: bmx7-table
Version: 7.1.1-5
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 9487
Filename: bmx7-table_7.1.1-5_mips_mips32.ipk
Size: 10150
SHA256sum: 6ca99559e963c132637463e4728043ff39bc0a9ddf9c156cd4e06d7c7fba3424
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: 7.1.1-5
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 5111
Filename: bmx7-topology_7.1.1-5_mips_mips32.ipk
Size: 5677
SHA256sum: ca76a302868a251cc5b313dddece7757cb6ad238ae80923b50b688e36c6307f0
Description:  topology plugin

Package: bmx7-tun
Version: 7.1.1-5
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 25296
Filename: bmx7-tun_7.1.1-5_mips_mips32.ipk
Size: 25938
SHA256sum: 7d76706fa23dbf760893d5d73039fe895f5d240ed5a8ecffcc4cc5cf807025e2
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: 7.1.1-5
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 8090
Filename: bmx7-uci-config_7.1.1-5_mips_mips32.ipk
Size: 8816
SHA256sum: 7dc83ba0a9136e80c3b8f68ed5db6b8294e89e6edecd3ed6559f34460911d8e2
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: 7.1.1-5
Depends: libc, zlib, libmbedtls12, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 179241
Filename: bmx7_7.1.1-5_mips_mips32.ipk
Size: 179522
SHA256sum: 4e0c6514ce58dbd6062d1ec2421061daf05c48e25effc46046c574eb79ed779d
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: v21.1-5
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 378662
Filename: cjdns-tests_v21.1-5_mips_mips32.ipk
Size: 377685
SHA256sum: 197f61e5363810b0fed187a63be786da0309b0126595f72fee1028b158506706
Description:  cjdns test cases

Package: cjdns
Version: v21.1-5
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 456869
Filename: cjdns_v21.1-5_mips_mips32.ipk
Size: 456426
SHA256sum: c51cff84c770d95d4a1e51cb5bac46d6f2d770d9fc3a795b8394be308b6c636b
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018-12-21-c4376661-1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
Architecture: mips_mips32
Installed-Size: 545
Filename: hnet-full-l2tp_2018-12-21-c4376661-1_mips_mips32.ipk
Size: 1389
SHA256sum: aa65942c0e081647eae73326a9fb6183401e35fe2630bca2187d6404bfd2e5b5
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018-12-21-c4376661-1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
Architecture: mips_mips32
Installed-Size: 97
Filename: hnet-full-secure_2018-12-21-c4376661-1_mips_mips32.ipk
Size: 931
SHA256sum: ab3a9f96da8e6370b410c9563a08fc2307fc6cec654abf6c53da9f220a7be5fb
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018-12-21-c4376661-1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
Architecture: mips_mips32
Installed-Size: 97
Filename: hnet-full_2018-12-21-c4376661-1_mips_mips32.ipk
Size: 908
SHA256sum: cfdbd3fe035c0e410af3afab7689984be9bc33e3fe4ed41cefa724cc50fd84d8
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018-12-21-c4376661-1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
Architecture: mips_mips32
Installed-Size: 95843
Filename: hnetd-nossl_2018-12-21-c4376661-1_mips_mips32.ipk
Size: 96390
SHA256sum: e330cca7cd418340b0e3e0ac7c128d040698a7fc61af1dc66f5222ef3eca59ed
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018-12-21-c4376661-1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
Architecture: mips_mips32
Installed-Size: 106610
Filename: hnetd-openssl_2018-12-21-c4376661-1_mips_mips32.ipk
Size: 106475
SHA256sum: ac214593527b1264fea64cedf4d5e46577ba64b8bfe057685fee4bba738b244c
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
Architecture: mips_mips32
Installed-Size: 5672
Filename: luci-app-cjdns_1.3-9_mips_mips32.ipk
Size: 6555
SHA256sum: 5028db52acc10a94c8e321da9091197fca59978459a3bedfc213c363d31ab0dd
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018-12-21-c4376661-1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: mips_mips32
Installed-Size: 56777
Filename: luci-app-hnet_2018-12-21-c4376661-1_mips_mips32.ipk
Size: 57611
SHA256sum: 4c43ecaac5429d08b2a88e62216f37dae4c0c51d80a15feac7be2350d74ea84f
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-15
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 6995
Filename: luci-app-olsrd2_0.2.6-15_all.ipk
Size: 7866
SHA256sum: 4a347460ff48f54c7f0380bb80d7810828414e792ba148c66bc71ed148003ce0
Description:  OLSR2 configuration and status module

Package: mcproxy
Version: 2017-08-24-93b5ace4-9
Depends: libc, libpthread, libstdcpp6
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 122244
Filename: mcproxy_2017-08-24-93b5ace4-9_mips_mips32.ipk
Size: 122490
SHA256sum: 08cf712b3990d34b4adc89e3157314f46b6d95f2443cc816f7f92c4e277dfb04
Description:  mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see  RFC 4605) for Linux systems.
 It operates on the kernel tables for multicast routing and allows for multiple instantiations,
 as well as dynamically changing downstream interfaces.

Package: mesh11sd
Version: 2.0.0-1
Depends: libc
License: GPL-2.0-or-later
Section: net
Architecture: all
Installed-Size: 5498
Filename: mesh11sd_2.0.0-1_all.ipk
Size: 6885
SHA256sum: bfdba4904870c87c1b513b3732d6b3611f0a631f668a0d73ccf9225f20cb7b5a
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon dynamically checks configured parameters and sets them as required.
 Upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014-12-12-2d6d1b0b-7
Depends: libc, libubox202312041
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 6565
Filename: minimalist-pcproxy_2014-12-12-2d6d1b0b-7_mips_mips32.ipk
Size: 7560
SHA256sum: 364d7485291b5189871e4f844efee2827147757caff43704a0d3515f4e0ed5c5
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 1943
Filename: naywatch_1-7_all.ipk
Size: 2849
SHA256sum: c532339d17ee4935287b9be0fe99fff3905c9d93afe2c789272fff205e5076b7
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 31251
Filename: ndppd_0.2.5-2_mips_mips32.ipk
Size: 31735
SHA256sum: f2a3448c99aa7074d97904d273e70689e069a257818199a57e897527f6c35ff4
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 45725
Filename: nodogsplash_5.0.2-1_mips_mips32.ipk
Size: 46137
SHA256sum: a71008b19c1aafb4911353bcd0e1eb6f8bdc6623f70f981e902b65f90a5c8ee8
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020-05-22-0dfef1eb-3
Depends: libc, libubox202312041, mdnsd
License: GPL-2.0-only
Section: net
Architecture: mips_mips32
Installed-Size: 11052
Filename: ohybridproxy_2020-05-22-0dfef1eb-3_mips_mips32.ipk
Size: 11790
SHA256sum: b67d05dda6bb56a2fbb7b265ad06639dd7464832f0a4d985e746d33308f31fec
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 2026
Filename: olsrd-mod-arprefresh_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 2655
SHA256sum: dd0ce136c560690958c47b1e79bab5839d4bc133da43327aea2b24ecbf1ecbe5
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 12114
Filename: olsrd-mod-bmf_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 12833
SHA256sum: aa26b16edc91d5defc326cbfe6336a803b08e0abe4e9dd22fd85edf2d2f1249e
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 3806
Filename: olsrd-mod-dot-draw_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 4411
SHA256sum: 5527d8418bf3852935072ad8f41ea7186da57fbb02f40f76d73da93faf1e6ef2
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 2390
Filename: olsrd-mod-dyn-gw-plain_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 3028
SHA256sum: ce4476d5e751f3b094abdc4c207412ac4f0ebcdf6c35d5ce7af33df9f6d6f80b
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 4221
Filename: olsrd-mod-dyn-gw_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 4821
SHA256sum: eeb407cb9b04602429e8b7951a53558072b10af9dbb4375a441a64145c969892
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 2578
Filename: olsrd-mod-filtergw_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 3206
SHA256sum: a3a36c15d489584bb1693727758a145940ebb44d99fd86f12de96a6f5ccca3fe
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 31281
Filename: olsrd-mod-httpinfo_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 31789
SHA256sum: 36611b7509b1dd55bbbd043a359ec289cd57cbf2ed3850ccb4ba71b118d55f4e
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 23084
Filename: olsrd-mod-jsoninfo_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 23808
SHA256sum: 255208212499aff169b33d2a8e544464cc80530adef526a7998c75675756c4bc
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 8828
Filename: olsrd-mod-mdns_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 9485
SHA256sum: 4cc49efaaaee0d90a316a4a23f3d2ce018cdc09d971dc52c7f87b0625f37ffa4
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 11412
Filename: olsrd-mod-nameservice_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 11996
SHA256sum: 6cdfd548315037dabbb03c2bdaebe8abd116e23c702f047d71aea4e3d5405e2f
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 13213
Filename: olsrd-mod-netjson_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 13835
SHA256sum: e6add949a1ada9bca16571b1838fb42325375ab5ddc765d4d727493981df2871
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 8576
Filename: olsrd-mod-p2pd_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 9226
SHA256sum: 8e41a249b6432ec78623125c0c426b1c26d0429fdd69d28244416732e9e40d2f
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 2961
Filename: olsrd-mod-pgraph_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 3592
SHA256sum: 0a6e6b9c66836c831377ec47336d7de0d3cfa92ffbee691813cfac8903e06d98
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 62920
Filename: olsrd-mod-pud_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 63352
SHA256sum: 6e2a43a8e37a145be31fe6400a1b92f61be216e7b0c1948018477f99425971a9
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 6232
Filename: olsrd-mod-quagga_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 6951
SHA256sum: ecf028409cf4dfad049f202bdbec427bcc1e95ec8458d2c7cac8a90cf3f081ba
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 10293
Filename: olsrd-mod-secure_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 10966
SHA256sum: 58ee639f488feeb0aedb8d2b9d2a665f9dcbdaf0ac4b3487ef42e4b4902cefb5
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 4514
Filename: olsrd-mod-sgwdynspeed_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 5166
SHA256sum: 049f941d4b8d579b021ddc0e1fb1f5c81656a33474be781b9fd0e19140de2337
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 14997
Filename: olsrd-mod-txtinfo_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 15608
SHA256sum: 8b225781852a53a390c6ea5565f1c9ed474e078e14ded3d9cc2a5c517d2315f8
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 1709
Filename: olsrd-mod-watchdog_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 2370
SHA256sum: e63f9d0c649ea82b47422a0db9ed5025736ae0ad910c0ddebffd11128e19f64f
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 1180
Filename: olsrd-utils_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 1925
SHA256sum: 0403f51a596cb755034dc3415e966be5314a72df2eb65d8c7b4cde75fa7b8ab6
Description:  Utils for OLSRD

Package: olsrd
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, libpthread, libubus20231128, iptables, ip6tables
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 140490
Filename: olsrd_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 141153
SHA256sum: a3b2073fa5e13b467c2f1250b0141388996079b56efedb1bc007587037a66ce0
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022-08-25-fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
Architecture: mips_mips32
Installed-Size: 159783
Filename: oonf-dlep-proxy_2022-08-25-fb15d54d_mips_mips32.ipk
Size: 160253
SHA256sum: 23f17da646ee7a86f8c94129cf71a3f5ca43224a24a28dd7e496b894df9d4f78
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022-08-25-fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
Architecture: mips_mips32
Installed-Size: 155795
Filename: oonf-dlep-radio_2022-08-25-fb15d54d_mips_mips32.ipk
Size: 156140
SHA256sum: 0ea4552616f1684d762cb54f9fa8800eb6a978eab3af1b047ef86f163401f638
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
Architecture: mips_mips32
Installed-Size: 1545
Filename: oonf-init-scripts_0.9.1-r3_mips_mips32.ipk
Size: 2280
SHA256sum: 6bbc3a117fc6aca88f86aee77c889c22d5bd8370e6b4cf1987028e7177080290
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022-08-25-1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
Architecture: mips_mips32
Installed-Size: 232779
Filename: oonf-olsrd2_2022-08-25-1cec9b21_mips_mips32.ipk
Size: 233068
SHA256sum: 199b1f98008e2ae0c05fd74b55a6fb7ccc67b9a0ebbb34bebc84da7d31beb74d
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.2.0-1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 156837
Filename: opennds_10.2.0-1_mips_mips32.ipk
Size: 156275
SHA256sum: 302caeeaf1c5c648985a394b6997092b335032e3a41b684a97b5ba7f92d1180e
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018-06-19-dbf4e591-4
Depends: libc, netifd
License: Apache-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 78915
Filename: pimbd_2018-06-19-dbf4e591-4_mips_mips32.ipk
Size: 79705
SHA256sum: bfd63f45699fd466736d7f38d7d4bccad139794fe10aa9ba6d195c8a42b75d7f
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
Architecture: mips_mips32
Installed-Size: 33224
Filename: prince_0.4-3_mips_mips32.ipk
Size: 33769
SHA256sum: d2f6eed25ecfee9df4e8630d530fa6c2a394e291b720243f93d8dad0358c6883
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013-04-07-7710cce4-9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
Architecture: mips_mips32
Installed-Size: 10458
Filename: vis_2013-04-07-7710cce4-9_mips_mips32.ipk
Size: 11117
SHA256sum: 8aa3438d3cdca6145e58ab512ef5fa0b83806168cf627b937c7a71608a49614f
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020-05-22-0dfef1eb-3
Depends: libc, libubox202312041
License: GPL-2.0-only
Section: net
Architecture: mips_mips32
Installed-Size: 8844
Filename: zonestitcher_2020-05-22-0dfef1eb-3_mips_mips32.ipk
Size: 9512
SHA256sum: 9a555573e9c9c4cd76acf84cd0be6a9d2b086dfca58d10f5c75cac0b034cdea8
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.