Scientific Linux Fermi 6.8 x86_64

Update: slf-release-notes-6.8-3

Tue, 16 Aug 2016 20:52:16 +0000

Package: slf-release-notes
Summary: Release Notes for Scientific Linux Fermi 6.8

Description:
Scientific Linux Fermi 6.8 release notes. As well as the Upstream Vendors release notes (English).

Changes:

slf-release-notes-6.8-3.noarch [174 KiB]

Changelog by Connie Sieh (2016-08-11):

- The release notes for 6.8

Update: slf-release-6.8-2

Thu, 11 Aug 2016 19:52:10 +0000

Package: slf-release
Summary: Scientific Linux Fermi release file

Description:
Scientific Linux Fermi release files

Changes:

slf-release-6.8-2.x86_64 [38 KiB]

Changelog by Connie Sieh (2016-08-11):

- updated for 6.8 not 6rolling

Update: zz_local_dns_cache-3-1.4.1

Thu, 11 Aug 2016 13:34:22 +0000

Package: zz_local_dns_cache
Summary: This package configures a host do local dns caching with bind

Description:
Installing this package will reconfigure named to run as a caching nameserver which will only allow connections from localhost. Your /etc/resolv.conf will be modified to call on localhost as primary nameserver. The dhclient process will be configured to use this nameserver, if present. Network Manager will be configured to use this nameserver, if present. You should consider customizing the DNS server search list provided. When removed you will be restored to using 131.225.0.254 SLF is used both on and off site. If this is not what you want, you will need to customize these. This package should work on SLF5 and SLF6. NOTE: it disables dnsmasq to prevent conflicts, if you need dnsmasq do not install this package or figure out how to fix your site after it runs. This rpm makes the following assumptions: * If this is a fresh install of the rpm, named will be started and /etc/resolv.conf will be _replaced_ with the only nameserver being '127.0.0.1' * If this rpm is updated, it will ensure 'nameserver 127.0.0.1' is in /etc/resolv.conf * When removed, not upgraded, 131.225.0.254 is set instead unless there is another nameserver already listed. * Behavior specific to referenced packages will be execute whenever those packages are installed, updated, or removed. They consist of: bind NetworkManager dhclient dnsmasq nscd * On a bind update, bind will be restarted and the 'stub' zones will be reset. These are the RFC1912 zones. * On a bind update, 'nameserver 127.0.0.1' will be added to /etc/resolv.conf if not already listed. * On a bind update, if nscd is running and chkconfig on, nscd will be restarted. * On a NetworkManager installation or when zz_local_dns_cache is installed for the first time, '127.0.0.1' will be configured as the only DNS server for all interfaces whose configuration matches /etc/sysconfig/network-scripts/ifcfg-* that are not 'ifcfg-lo' When removed, not upgraded, 131.225.0.254 is set instead * On a dhclient installation or when when zz_local_dns_cache is installed for the first time, '127.0.0.1' is added the the dhcp provided DNS server list. When removed, not upgraded, this setting is removed. * On a dnsmasq installation or when when zz_local_dns_cache is installed for the first time, dnsmasq is disabled. * On a dnsmasq installation or when when zz_local_dns_cache is installed for the first time, dnsmasq is configured to listen on 127.0.0.1 if started with the defaul configuration file. It should function similarly to bind in this respect This feature was requested by people using libvirt/kvm. * On a nscd installation or update, if nscd is running and also chkconfig on nscd will be restarted. If zz_local_dns_cache is removed an if nscd is running and also chkconfig on nscd will be restarted.

Changes:

zz_local_dns_cache-3-1.4.1.noarch [29 KiB]

Changelog by Pat Riehecky (2016-08-11):

- Fix config file for 8.8.8.8 removal

Update: cigetcert-1.2-1.el6

Tue, 19 Jul 2016 17:34:03 +0000

Package: cigetcert
Summary: Get an X.509 certificate with SAML ECP and store proxies

Description:
cigetcert gets an X.509 certificate from a SAML 2.0 Service Provider (SP) such as CILogon using the Enhanced Client and Proxy (ECP) profile. Optionally it can also get a grid proxy certificate and/or transfer the proxy to MyProxy. It was developed for the Fermilab Distributed Computing Access with Federated Identities (DCAFI) project but is intended to be usable by other projects.

Changes:

cigetcert-1.2-1.el6.noarch [29 KiB]

Changelog by Dave Dykstra (2016-07-08):

- Try kerberos authentication first by default when the institution's
  IdP is known to support it, without a --kerberos option.
- Add --nokerberos option.
- Add support for additional default options in $CIGETCERTOPTS.
- Use getpwuid() instead of $LOGNAME for current user name.
- Avoid stack trace crash on el5 when previous outfile is empty.
- Avoid stack trace when password prompt is interrupted.
- Add wrapper script to unset PYTHONPATH and LD_LIBRARY_PATH.
- Pre-compile cigetcert python source.

Update: clamav-0.99.1-1.el6

Mon, 18 Jul 2016 22:22:45 +0000

Package: clamav
Summary: Anti-virus software

Description:
Clam AntiVirus is a GPL anti-virus toolkit for UNIX. The main purpose of this software is the integration with mail servers (attachment scanning). The package provides a flexible and scalable multi-threaded daemon, a command line scanner, and a tool for automatic updating via Internet. The programs are based on a shared library distributed with the Clam AntiVirus package, which you can use with your own software. Most importantly, the virus database is kept up to date

Changes:

clamav-0.99.1-1.el6.x86_64 [1.4 MiB]

Changelog by Robert Scheck (2016-03-29):

- Upgrade to 0.99.1 and updated main.cvd and daily.cvd (#1314115)

Update: clamav-db-0.99.1-1.el6

Mon, 18 Jul 2016 22:22:45 +0000

Package: clamav-db
Summary: Virus database for clamav

Description:
The actual virus database for clamav

Changes:

clamav-db-0.99.1-1.el6.x86_64 [63.8 MiB]

Changelog by Robert Scheck (2016-03-29):

- Upgrade to 0.99.1 and updated main.cvd and daily.cvd (#1314115)

Update: clamav-devel-0.99.1-1.el6

Mon, 18 Jul 2016 22:22:45 +0000

Package: clamav-devel
Summary: Header files, libraries and development documentation for clamav

Description:
This package contains the header files, static libraries and development documentation for clamav. If you like to develop programs using clamav, you will need to install clamav-devel.

Changes:

clamav-devel-0.99.1-1.el6.x86_64 [21 KiB]

Changelog by Robert Scheck (2016-03-29):

- Upgrade to 0.99.1 and updated main.cvd and daily.cvd (#1314115)

Update: clamav-milter-0.99.1-1.el6

Mon, 18 Jul 2016 22:22:45 +0000

Package: clamav-milter
Summary: The Clam AntiVirus sendmail-milter Daemon

Description:
The Clam AntiVirus sendmail-milter Daemon

Changes:

clamav-milter-0.99.1-1.el6.x86_64 [88 KiB]

Changelog by Robert Scheck (2016-03-29):

- Upgrade to 0.99.1 and updated main.cvd and daily.cvd (#1314115)

Update: clamd-0.99.1-1.el6

Mon, 18 Jul 2016 22:22:45 +0000

Package: clamd
Summary: The Clam AntiVirus Daemon

Description:
The Clam AntiVirus Daemon

Changes:

clamd-0.99.1-1.el6.x86_64 [164 KiB]

Changelog by Robert Scheck (2016-03-29):

- Upgrade to 0.99.1 and updated main.cvd and daily.cvd (#1314115)

Update: clamav-unofficial-sigs-3.7.1-7.el6

Mon, 18 Jul 2016 22:22:15 +0000

Package: clamav-unofficial-sigs
Summary: Scripts to download unoffical clamav signatures

Description:
This package contains scripts and configuration files that provide the capability to download, test, and update the 3rd-party signature databases provide by Sanesecurity, SecuriteInfo, MalwarePatrol, OITC, INetMsg and ScamNailer.

Changes:

clamav-unofficial-sigs-3.7.1-7.el6.noarch [38 KiB]

Changelog by Robert Scheck (2014-08-08):

- Change run-time requirement from bind-utils to %{_bindir}/dig
  as it can be provided/satisfied by different packages

Update: alpine-2.20-2.el6

Mon, 18 Jul 2016 21:14:59 +0000

Package: alpine
Summary: powerful, easy to use console email client

Description:
Alpine -- an Alternatively Licensed Program for Internet News & Email -- is a tool for reading, sending, and managing electronic messages. Alpine is the successor to Pine and was developed by Computing & Communications at the University of Washington. Though originally designed for inexperienced email users, Alpine supports many advanced features, and an ever-growing number of configuration and personal-preference options. Changes and enhancements over pine: * Released under the Apache Software License, Version 2.0. * Internationalization built around new internal Unicode support. * Ground-up reorganization of source code around new "pith/" core routine library. * Ground-up reorganization of build and install procedure based on GNU Build System's autotools.

Changes:

alpine-2.20-2.el6.x86_64 [3.2 MiB]

Changelog by Rex Dieter (2015-10-09):

- use patched alpine sources (#1270331,#1270183)

Update: kmod-openafs-1.6.18-1.SL68.el6

Wed, 15 Jun 2016 21:04:41 +0000

Package: kmod-openafs
Summary: Pull in OpenAFS kernel modules

Description:
Pull in kernel modules for the current SL release, and (maybe) the previous one.

Changes:

kmod-openafs-1.6.18-1.SL68.el6.noarch [2 KiB]

Changelog by Kevin M. Hill (2016-06-15):

- Update to current afs version

Update: kmod-openafs-642-1.6.18-239.sl6.642

Wed, 15 Jun 2016 17:57:27 +0000

Package: kmod-openafs-642
Summary: OpenAFS kernel module for the 2.6.32-642 kernel generation

Description:
This package provides the OpenAFS kernel module built for the Linux 2.6.32-642 kernel generation using the x86_64 family of processors.

Changes:

kmod-openafs-642-1.6.18-239.sl6.642.x86_64 [357 KiB]

Changelog by Stephan Wiesand (2016-04-29):

- update to release 1.6.18

Update: openafs-1.6.18-239.sl6

Wed, 15 Jun 2016 17:52:40 +0000

Package: openafs
Summary: OpenAFS Distributed Filesystem

Description:
The AFS distributed filesystem. AFS is a distributed filesystem allowing cross-platform sharing of files among multiple computers. Facilities are provided for access control, authentication, backup and administrative management. This package provides common files shared across all the various OpenAFS packages but are not necessarily tied to a client or server.

Changes:

openafs-1.6.18-239.sl6.x86_64 [4.1 MiB]

Changelog by Stephan Wiesand (2016-04-29):

- update to release 1.6.18

Update: openafs-authlibs-1.6.18-239.sl6

Wed, 15 Jun 2016 17:52:40 +0000

Package: openafs-authlibs
Summary: OpenAFS Authentication Shared Libraries

Description:
The AFS distributed filesystem. AFS is a distributed filesystem allowing cross-platform sharing of files among multiple computers. Facilities are provided for access control, authentication, backup and administrative management. This package provides a shared version of libafsrpc and libafsauthent. None of the programs included with OpenAFS currently use these shared libraries; however, third-party software that wishes to perform AFS authentication may link against them.

Changes:

openafs-authlibs-1.6.18-239.sl6.x86_64 [699 KiB]

Changelog by Stephan Wiesand (2016-04-29):

- update to release 1.6.18

Update: openafs-authlibs-devel-1.6.18-239.sl6

Wed, 15 Jun 2016 17:52:40 +0000

Package: openafs-authlibs-devel
Summary: OpenAFS Shared Library Development

Description:
The AFS distributed filesystem. AFS is a distributed filesystem allowing cross-platform sharing of files among multiple computers. Facilities are provided for access control, authentication, backup and administrative management. This package includes symlinks required for building against the dynamic version of libafsrpc and libafsauthent.

Changes:

openafs-authlibs-devel-1.6.18-239.sl6.x86_64 [577 KiB]

Changelog by Stephan Wiesand (2016-04-29):

- update to release 1.6.18

Update: openafs-client-1.6.18-239.sl6

Wed, 15 Jun 2016 17:52:40 +0000

Package: openafs-client
Summary: OpenAFS Filesystem Client

Description:
The AFS distributed filesystem. AFS is a distributed filesystem allowing cross-platform sharing of files among multiple computers. Facilities are provided for access control, authentication, backup and administrative management. This package provides basic client support to mount and manipulate AFS. Configure options enabled for this build: fuse-client: 1 debugsyms: 1

Changes:

openafs-client-1.6.18-239.sl6.x86_64 [708 KiB]

Changelog by Stephan Wiesand (2016-04-29):

- update to release 1.6.18

Update: openafs-compat-1.6.18-239.sl6

Wed, 15 Jun 2016 17:52:40 +0000

Package: openafs-compat
Summary: OpenAFS Client Compatibility Symlinks

Description:
The AFS distributed filesystem. AFS is a distributed filesystem allowing cross-platform sharing of files among multiple computers. Facilities are provided for access control, authentication, backup and administrative management. This package provides compatibility symlinks in /usr/afsws. It is completely optional, and is only necessary to support legacy applications and scripts that hard-code the location of AFS client programs.

Changes:

openafs-compat-1.6.18-239.sl6.x86_64 [42 KiB]

Changelog by Stephan Wiesand (2016-04-29):

- update to release 1.6.18

Update: openafs-devel-1.6.18-239.sl6

Wed, 15 Jun 2016 17:52:40 +0000

Package: openafs-devel
Summary: OpenAFS Development Libraries and Headers

Description:
The AFS distributed filesystem. AFS is a distributed filesystem allowing cross-platform sharing of files among multiple computers. Facilities are provided for access control, authentication, backup and administrative management. This package provides static development libraries and headers needed to compile AFS applications. Note: AFS currently does not provide shared libraries.

Changes:

openafs-devel-1.6.18-239.sl6.x86_64 [969 KiB]

Changelog by Stephan Wiesand (2016-04-29):

- update to release 1.6.18

Update: openafs-kernel-source-1.6.18-239.sl6

Wed, 15 Jun 2016 17:52:40 +0000

Package: openafs-kernel-source
Summary: OpenAFS Kernel Module Source Tree

Changes:

openafs-kernel-source-1.6.18-239.sl6.x86_64 [1.2 MiB]

Changelog by Stephan Wiesand (2016-04-29):

- update to release 1.6.18

Update: openafs-kpasswd-1.6.18-239.sl6

Wed, 15 Jun 2016 17:52:40 +0000

Package: openafs-kpasswd
Summary: OpenAFS KA kpasswd Support

Description:
The AFS distributed filesystem. AFS is a distributed filesystem allowing cross-platform sharing of files among multiple computers. Facilities are provided for access control, authentication, backup and administrative management. This package provides the compatibility symlink for kpasswd, in case you are using KAserver instead of Krb5.

Changes:

openafs-kpasswd-1.6.18-239.sl6.x86_64 [152 KiB]

Changelog by Stephan Wiesand (2016-04-29):

- update to release 1.6.18

Update: openafs-krb5-1.6.18-239.sl6

Wed, 15 Jun 2016 17:52:40 +0000

Package: openafs-krb5
Summary: OpenAFS Programs to use with krb5

Description:
The AFS distributed filesystem. AFS is a distributed filesystem allowing cross-platform sharing of files among multiple computers. Facilities are provided for access control, authentication, backup and administrative management. This package provides compatibility programs so you can use krb5 to authenticate to AFS services, instead of using AFS's homegrown krb4 lookalike services.

Changes:

openafs-krb5-1.6.18-239.sl6.x86_64 [205 KiB]

Changelog by Stephan Wiesand (2016-04-29):

- update to release 1.6.18

Update: openafs-module-tools-1.6.18-239.sl6

Wed, 15 Jun 2016 17:52:40 +0000

Package: openafs-module-tools
Summary: OpenAFS analogon to weak-modules

Changes:

openafs-module-tools-1.6.18-239.sl6.x86_64 [41 KiB]

Changelog by Stephan Wiesand (2016-04-29):

- update to release 1.6.18

Update: openafs-plumbing-tools-1.6.18-239.sl6

Wed, 15 Jun 2016 17:52:40 +0000

Package: openafs-plumbing-tools
Summary: OpenAFS Additional Debugging Utilities

Description:
The AFS distributed filesystem. AFS is a distributed filesystem allowing cross-platform sharing of files among multiple computers. Facilities are provided for access control, authentication, backup and administrative management. This package provides additional tools useful for understanding and debugging the client and server. It is completely optional.

Changes:

openafs-plumbing-tools-1.6.18-239.sl6.x86_64 [1.4 MiB]

Changelog by Stephan Wiesand (2016-04-29):

- update to release 1.6.18

Update: openafs-server-1.6.18-239.sl6

Wed, 15 Jun 2016 17:52:40 +0000

Package: openafs-server
Summary: OpenAFS Filesystem Server

Description:
The AFS distributed filesystem. AFS is a distributed filesystem allowing cross-platform sharing of files among multiple computers. Facilities are provided for access control, authentication, backup and administrative management. This package provides basic server support to host files in an AFS Cell. Configure options enabled for this build: bitmap-later: 1 bos-restricted-mode: 1 bos-new-config: 1 fast-restart: 1 supergroups: 1 largefile-fileserver: 1 debugsyms: 1

Changes:

openafs-server-1.6.18-239.sl6.x86_64 [2.3 MiB]

Changelog by Stephan Wiesand (2016-04-29):

- update to release 1.6.18

Update: nfs-ganesha-2.2.0-12.el6

Thu, 09 Jun 2016 20:56:46 +0000

Package: nfs-ganesha
Summary: NFS-Ganesha is a NFS Server running in user space

Description:
nfs-ganesha : NFS-GANESHA is a NFS Server running in user space. It comes with various back-end modules (called FSALs) provided as shared objects to support different file systems and name-spaces.

Changes:

nfs-ganesha-2.2.0-12.el6.x86_64 [528 KiB]

Changelog by Soumya Koduri (2015-12-16):

- MainNFSD: Unref export entry if pNFS DS is enabled (#1286244)
- [FSAL_GLUSTER] Handle ENOENT properly in getattrs (#1289483)

Update: nfs-ganesha-gluster-2.2.0-12.el6

Thu, 09 Jun 2016 20:56:46 +0000

Package: nfs-ganesha-gluster
Summary: The NFS-GANESHA's GLUSTER FSAL

Description:
This package contains a FSAL shared object to be used with NFS-Ganesha to support Gluster

Changes:

nfs-ganesha-gluster-2.2.0-12.el6.x86_64 [31 KiB]

Changelog by Soumya Koduri (2015-12-16):

- MainNFSD: Unref export entry if pNFS DS is enabled (#1286244)
- [FSAL_GLUSTER] Handle ENOENT properly in getattrs (#1289483)

Update: userspace-rcu-0.7.9-2.el6rhs

Thu, 09 Jun 2016 20:35:26 +0000

Package: userspace-rcu
Summary: RCU (read-copy-update) implementation in user space

Description:
This data synchronization library provides read-side access which scales linearly with the number of cores. It does so by allowing multiples copies of a given data structure to live at the same time, and by monitoring the data structure accesses to detect grace periods after which memory reclamation is possible.

Changes:

userspace-rcu-0.7.9-2.el6rhs.x86_64 [60 KiB]

Changelog by Bala FA (2015-05-14):

- Resolves bz#1220499: Add package userspace-rcu

Update: userspace-rcu-devel-0.7.9-2.el6rhs

Thu, 09 Jun 2016 20:35:26 +0000

Package: userspace-rcu-devel
Summary: Development files for userspace-rcu

Description:
The userspace-rcu-devel package contains libraries and header files for developing applications that use userspace-rcu.

Changes:

userspace-rcu-devel-0.7.9-2.el6rhs.x86_64 [47 KiB]

Changelog by Bala FA (2015-05-14):

- Resolves bz#1220499: Add package userspace-rcu

Update: control-center-2.28.1-40.el6

Fri, 03 Jun 2016 21:59:03 +0000

Package: control-center
Summary: Utilities to configure the GNOME desktop

Description:
This package contains configuration utilities for the GNOME desktop, which allow to configure accessibility options, desktop fonts, keyboard and mouse properties, sound setup, desktop theme and background, user interface properties, screen resolution, and other settings.

Changes:

control-center-2.28.1-40.el6.x86_64 [2.5 MiB]	Changelog by Bastien Nocera (2016-03-09): - Update translations Resolves: #887764
control-center-2.28.1-40.el6.i686 [2.5 MiB]	Changelog by Bastien Nocera (2016-03-09): - Update translations Resolves: #887764