Installation instructions for the rt2570 Module

=======================================================================
Build Instructions:
====================
	For 2.4 or 2.6 series kernel:

	a. $tar -xvzf rt2570-x.x.x.tar.gz
	go to "./rt2570-x.x.x/Module" directory.

	b. $make # compile driver source code

	c. $make install # installs kernel module driver

	d. $modprobe rt2570

=======================================================================
UTILITY
====================
	There is no utility as of yet, use iwconfig to configure your usb stick.

=======================================================================
CONFIGURATION:
====================
	RT2570 driver can be configured via following interfaces,
	i.e. (i)"iwconfig" command, (ii)"iwpriv" command

	i) iwconfig comes with kernel.
	ii) iwpriv usage, please refer to file "iwpriv_usage.txt" for details.

MORE INFORMATION
=================================================================================
	If you want for rt2570 driver to auto-load at boot time:

	A) choose rausb0 for first RT2570 WLAN card, rausb1 for second RT2570 WLAN card, etc.

	B) create(edit) 'ifcfg-rausb0' file in /etc/sysconfig/network-scripts/,
	edit( or add the line) in /etc/modules.conf:
	alias rausb0 rt2570

	C) edit(create) the file /etc/sysconfig/network-scripts/ifcfg-rausb0
	DEVICE='rausb0'
	ONBOOT='yes'


	NOTE:
	if you use dhcp, add this line too .
	BOOTPROTO='dhcp'

	*D) To ease the Default Gateway setting,
	add the line
	GATEWAY=x.x.x.x
	in /etc/sysconfig/network 
